Development of deformable aqueous Li-ion batteries enabled by water-in-salt-based hydrogel electrolytes
Source abstract
Abstract
The growing demand for safe, deformable, and high-performance energy storage systems, driven by advances in wearable electronics, soft robotics, and biomedical devices, has brought deformable aqueous lithium-ion batteries (ALIBs) into focus. Water as the electrolyte solvent imparts ALIBs with intrinsic safety and higher moisture tolerance than conventional organic-electrolyte LIBs, enabling the use of stretchable and deformable packaging that is generally non-hermetic. However, their electrochemical performance is fundamentally constrained by the narrow electrochemical stability window (ESW) of water, which limits the achievable cell voltage and energy density. Recent progress in water-in-salt electrolytes (WiSEs) and their hydrogel-based derivatives (WiS-HGEs) presents a promising strategy to overcome these challenges. Due to the high salt concentrations involved, WiSEs suppress the reactivity of water, thereby broadening the ESW. WiS-HGE offers enhanced mechanical robustness to support the deformability of ALIBs, where the hydrogel serves as both the electrolyte and a stretchable separator, preventing electrolyte leakage and maintaining ionic conductivity under mechanical deformation. This article reviews the latest advancements in deformable ALIBs enabled by WiS-HGE systems, with a focus on how salt selection, electrolyte composition, and polymer matrix collectively influence electrochemical performance. Perspectives on current challenges and future directions are discussed in the last section, highlighting material design strategies, interfacial engineering approaches, and component-level innovations. Our contributions alongside other breakthrough advancements in flexible and stretchable aqueous lithium-ion batteries based on water-in-salt gel electrolytes • Unlike conventional LIBs, ALIBs offer intrinsic safety, environmental friendliness, and cost-effectiveness. • High salt concentrations suppress water reactivity, expanding ESW, enabling high-voltage ALIBs. • Gel-based WiSEs prevent leakage, add flexibility/stretchability, and maintain ionic conductivity under deformation, critical for wearable applications. • Innovations in materials and structure design strategies are required to maintain electrochemical performance under mechanical deformation for flexible/stretchable batteries.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced battery technologies research · Advanced Battery Materials and Technologies · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. A review of rechargeable batteries for portable electronic devices10.1002/inf2.12000 ↗
2. Deformable lithium-ion batteries for wearable and implantable electronics10.1063/5.0117252 ↗
3. Flexible and stretchable power sources for wearable electronics10.1126/sciadv.1602051 ↗
4. Flexible and stretchable Li ion battery using origami scale structure for untethered soft robot10.1149/MA2024-02104902mtgabs ↗
5. Flexible self-charging power sources10.1038/s41578-022-00441-0 ↗
6. Stretchable electrochemical energy storage devices10.1039/D0CS00035C ↗
7. Flexible and Stretchable Energy Storage: Recent Advances and Future Perspectives10.1002/adma.201603436 ↗
8. Comprehensive review of lithium-ion battery materials and development challenges10.1016/j.rser.2024.114783 ↗
9. The Li-Ion rechargeable battery: a perspective10.1021/ja3091438 ↗
10. High-Energy Lithium-Ion Batteries: Recent Progress and a Promising Future in Applications10.1002/eem2.12450 ↗
11. A review of lithium-ion battery safety concerns: The issues, strategies, and testing standards10.1016/j.jechem.2020.10.017 ↗
12. Safer lithium ion batteries based on nonflammable electrolyte10.1016/j.jpowsour.2014.12.150 ↗
13. “Water-in-salt” electrolyte enables high-voltage aqueous lithium-ion chemistries
14. Electrochemical behavior of LiCoO2 as aqueous lithium-ion battery electrodes10.1016/j.elecom.2008.11.015 ↗
15. Aqueous rechargeable lithium battery (ARLB) based on LiV3O8 and LiMn2O4 with good cycling performance10.1016/j.elecom.2007.04.017 ↗
16. Electrochemical Behavior of Spherical LiFePO4/C Nanomaterial in Aqueous Electrolyte, and Novel Aqueous Rechargeable Lithium Battery with LiFePO4/C anode10.1016/j.electacta.2014.12.088 ↗
17. Electrochemical performance of LiFePO4/C synthesized by sol-gel method as cathode for aqueous lithium ion batteries10.1016/j.jallcom.2018.01.083 ↗
18. Understanding the interfacial reactions of LiCoO2 positive electrodes in aqueous lithium-ion batteries10.1039/D1QM00125F ↗
19. Stabilizing Layered Structure in Aqueous Electrolyte via Dynamic Water Intercalation/Deintercalation10.1002/adma.202108541 ↗
20. High-voltage water-scarce hydrogel electrolytes enable mechanically safe stretchable Li-ion batteries10.1126/sciadv.adu3711 ↗
21. Stable and dendrite-free lithium metal anodes enabled by carbon paper incorporated with ultrafine lithiophilic TiO2 derived from MXene and carbon dioxide10.1016/j.cej.2020.126836 ↗
22. Synergistic effect of graphene oxide for impeding the dendritic plating of Li10.1002/adfm.201705917 ↗
23. Flexible Aqueous Li-Ion Battery with High Energy and Power Densities10.1002/adma.201701972 ↗
24. Localized water-in-salt electrolyte for aqueous lithium-ion batteries10.1002/anie.202107389 ↗
25. “Water-in-salt” polymer electrolyte for Li-ion batteries10.1039/D0EE01510E ↗
26. Boron-Stabilized Anisotropic Water-in-Polymer Salt Electrolyte with an Exceptionally Low Salt Concentration by Hofmeister Effect for Aqueous Lithium-Ion Batteries10.1002/smll.202502776 ↗
27. “Water-in-Eutectogel” Electrolytes for Quasi-Solid-State Aqueous Lithium-Ion Batteries10.1002/aenm.202200401 ↗
28. Fluorine-free water-in-ionomer electrolytes for sustainable lithium-ion batteries10.1038/s41467-018-07331-6 ↗
29. Fully integrated design of a stretchable solid-state lithium-ion full battery10.1002/adma.201904648 ↗
30. UV-cured gel polymer electrolytes with improved stability for advanced aqueous Li-ion batteries10.1039/C9CC06207F ↗
31. Embedded 3D Li + channels in a water-in-salt electrolyte to develop flexible supercapacitors and lithium-ion batteries10.1039/C9TA08699D ↗
32. Gel electrolyte for a 4V flexible aqueous lithium-ion battery10.1016/j.jpowsour.2020.228378 ↗
33. UV-cured eutectic gel polymer electrolytes for safe and robust Li-ion batteries10.1039/D0TA01901A ↗
34. Surface aging at olivine LiFePO4: a direct visual observation of iron dissolution and the protection role of nano-carbon coating10.1039/C2TA00521B ↗
35. Ternary metal Prussian blue analogue nanoparticles as cathode materials for Li-ion batteries10.1039/c3dt51369f ↗
36. A Naphthalene Diimide Covalent Organic Framework: Comparison of Cathode Performance in Lithium-Ion Batteries with Amorphous Cross-linked and Linear Analogues, and Its Use in Aqueous Lithium-Ion Batteries10.1021/acsaem.0c02281 ↗
37. Enabling safe aqueous lithium ion open batteries by suppressing oxygen reduction reaction
38. TiO2 (B) anode for high-voltage aqueous Li-ion batteries10.1016/j.ensm.2021.07.046 ↗
39. VO2 (D) submicron-spherical hierarchical structures as novel anode materials for aqueous lithium-ion batteries10.1016/j.jallcom.2022.167472 ↗
40. Molecular crowding electrolytes for high-voltage aqueous batteries10.1038/s41563-020-0667-y ↗
41. Aqueous lithium-ion battery of dual electrolytes separated by cation-exchange membrane with enhanced rate capability for thick electrodes10.1016/j.est.2024.113366 ↗
42. Electrolyte for room-temperature fluoride-ion batteries based on a hydrophobic-hydrophilic salt10.1021/acs.nanolett.4c00244 ↗
43. 4.0 V Aqueous Li-Ion Batteries10.1016/j.joule.2017.08.009 ↗
44. Advanced High-Voltage Aqueous Lithium-Ion Battery Enabled by “Water-in-Bisalt” Electrolyte10.1002/anie.201602397 ↗
45. Water-in-salt electrolytes towards sustainable and cost-effective alternatives: Example for zinc-ion batteries
46. Progress and challenges of water-in-salt electrolytes: exploring physical chemistry properties and solid electrolyte interphase formation mechanisms10.1002/batt.202400722 ↗
47. Concentrated mixed cation acetate “water-in-salt” solutions as green and low-cost high voltage electrolytes for aqueous batteries10.1039/C8EE00833G ↗
48. Niobium Tungsten Oxide in a Green Water-in-Salt Electrolyte Enables Ultra-Stable Aqueous Lithium-Ion Capacitors
49. High voltage aqueous based energy storage with “Water-in-LiNO3” electrolyte10.1016/j.ceja.2023.100553 ↗
50. Hydrogen-bonding state of water in hydrate-melt and water-in-salt electrolytes probed by near-infrared spectroscopy10.1016/j.molliq.2025.127936 ↗
51. Reversible aqueous aluminum metal batteries enabled by a water-in-salt electrolyte10.1016/j.gee.2023.02.002 ↗
52. The role of the hydrogen evolution reaction in the solid–electrolyte interphase formation mechanism for “Water-in-Salt” electrolytes10.1039/C8EE02456A ↗
53. Addressing electrode degradation issue in high negative to positive electrode capacity ratio lithium-ion batteries using water-in-salt electrolyte10.1007/s42114-025-01347-5 ↗
54. Stabilizing the solid-electrolyte interphase with polyacrylamide for high-voltage aqueous lithium-ion batteries10.1002/anie.202107252 ↗
55. Molecular dynamics study of polymer-water interaction in hydrogels. 1
56. Water-in-salt electrolytes made saltier by Gemini ionic liquids for highly efficient Li-ion batteries10.1038/s41598-023-29387-1 ↗
57. Flexible Hydrogel Electrolytes for Organic Batteries with High Cyclability10.1021/acs.jpcc.4c00654 ↗
58. Solid electrolyte interphase in water-in-salt electrolytes10.1007/s40843-020-1597-8 ↗
59. How Solid-Electrolyte Interphase Forms in Aqueous Electrolytes10.1021/jacs.7b10688 ↗
60. Competitive Salt Precipitation/Dissolution During Free-Water Reduction in Water-in-Salt Electrolyte10.1002/ange.202005378 ↗
61. Unveiling LiTFSI Precipitation as a Key Factor in Solid Electrolyte Interphase Formation in Li-Based Water-in-Salt Electrolytes10.1002/smll.202303945 ↗
62. Unveiling the Critical Influence of EDTA Additives on Modulating Solvation Structure and Solid Electrolyte Interphase Formation in Water-in-Salt Electrolytes for Aqueous Batteries10.1002/aenm.202404145 ↗
63. Effect of conductivity, viscosity, and density of water-in-salt electrolytes on the electrochemical behavior of supercapacitors: molecular dynamics simulations and in situ characterization studies10.1039/D1MA00890K ↗
64. Liquid structure with nano-heterogeneity promotes cationic transport in concentrated electrolytes10.1021/acsnano.7b05664 ↗
65. Physicochemical and electrochemical properties of water-in-salt electrolytes10.1002/cssc.202100550 ↗
66. Water-in-bisalt electrolyte for high-performance aqueous dual-ion battery
67. Water-in-salt electrolytes for aqueous lithium-ion batteries with liquidus temperatures below −10 °C10.1039/C9CC04495G ↗
68. Lean-water hydrogel electrolyte for zinc ion batteries
69. Moisture self-regulating ionic skins with ultra-long ambient stability for self-healing energy and sensing systems10.1016/j.nanoen.2024.109858 ↗
70. Best practices in lithium battery cell preparation and evaluation10.1038/s43246-022-00286-8 ↗
71. Hydrogel ionotronics10.1038/s41578-018-0018-7 ↗
72. Potential dependent capacitance of [EMIM][TFSI], [N1114][TFSI] and [PYR13][TFSI] ionic liquids on glassy carbon10.1039/C8CP04631J ↗
73. Fine Tuning Water States in Hydrogels for High Voltage Aqueous Batteries10.1021/acsnano.3c08398 ↗
74. Methylation Approach to Salt-Concentrated Hydrogel Electrolytes for Long-Life Rechargeable Batteries
75. Poly(vinyl alcohol) Hydrogels with Broad-Range Tunable Mechanical Properties via the Hofmeister Effect10.1002/adma.202007829 ↗
76. Wearable and washable conductors for active textiles10.1021/acsami.7b07361 ↗
77. Enabling Deformable and Stretchable Batteries10.1002/aenm.202001424 ↗
78. Assembling carbon-coated α-Fe2O3 hollow nanohorns on the CNT backbone for superior lithium storage capability10.1039/C1EE02831F ↗
79. A multilayered silicon-reduced graphene oxide electrode for high performance lithium-ion batteries10.1021/acsami.5b01230 ↗
80. Modulation of lithium iron phosphate electrode architecture by magnetic ordering for lithium-ion batteries10.1039/D4TA02647K ↗
81. Charge ordering in lithium vanadium phosphates: Electrode materials for lithium-ion batteries10.1021/ja028973h ↗
82. The success story of graphite as a lithium-ion anode material – fundamentals, remaining challenges, and recent developments including silicon (oxide) composites10.1039/D0SE00175A ↗
83. Effect of poly(acrylic acid) on adhesion strength and electrochemical performance of natural graphite negative electrode for lithium-ion batteries10.1016/j.jpowsour.2006.03.087 ↗
84. Tailoring nanostructured MnO2 as anodes for lithium ion batteries with high reversible capacity and initial Coulombic efficiency10.1016/j.jpowsour.2018.01.024 ↗
85. Revealing the influence of conversion-type Co3O4 dimensionality on cyclic and rate performance for lithium storage10.1016/j.jcis.2023.05.053 ↗
86. Hierarchical silicon nanowires-carbon textiles matrix as a binder-free anode for high-performance advanced lithium-ion batteries
87. High-performance lithium battery anodes using silicon nanowires10.1038/nnano.2007.411 ↗
88. Nanostructured silicon for high capacity lithium battery anodes10.1039/C0EE00281J ↗
89. Immunizing lithium metal anodes against dendrite growth using protein molecules to achieve high energy batteries
90. Dynamic observation of dendrite growth on lithium metal anode during battery charging/discharging cycles10.1038/s41524-022-00788-6 ↗
91. Hierarchically structured conductive polymer binders with silver nanowires for high-performance silicon anodes in lithium-ion batteries10.1021/acsami.2c00844 ↗
92. An aqueous process for preparing flexible transparent electrodes using non-oxidized graphene/single-walled carbon nanotube hybrid solution10.3390/nano13152249 ↗
93. Gradually crosslinking carbon nanotube array in mimicking the beak of giant squid for compression-sensing supercapacitor10.1002/adfm.201902971 ↗
94. Highly stretchable room-temperature self-healing conductors based on wrinkled graphene films for flexible electronics10.1021/acsami.9b00274 ↗
95. Economic assessment of single-walled carbon nanotube processes10.1007/s11051-009-9673-3 ↗
96. Foldable electrode architectures based on silver-nanowire-wound or carbon-nanotube-webbed micrometer-scale fibers of polyethylene terephthalate mats for flexible lithium-ion batteries10.1002/adma.201705445 ↗
97. Designing flexible lithium-ion batteries by structural engineering10.1021/acsenergylett.8b02496 ↗
98. Mechanical properties of regular porous biomaterials made from truncated cube repeating unit cells: Analytical solutions and computational models10.1016/j.msec.2015.11.001 ↗
99. 3D Porous Sponge-Inspired Electrode for Stretchable Lithium-Ion Batteries10.1002/adma.201505299 ↗
100. Bendable inorganic thin-film battery for fully flexible electronic systems10.1021/nl302254v ↗