journal article·2023-04-09Open access

Towards Automated and High-Throughput Quantitative Sizing and Isotopic Analysis of Nanoparticles via Single Particle-ICP-TOF-MS

Benjamin T. Manard, Veronica C. Bradley, C. Derrick Quarles, Lyndsey Hendriks, Daniel R. Dunlap, Cole R. Hexel, Patrick Sullivan, Hunter B. Andrews

Nanomaterials· Volume 13· Issue 8

Abstract

The work described herein assesses the ability to characterize gold nanoparticles (Au NPs) of 50 and 100 nm, as well as 60 nm silver shelled gold core nanospheres (Au/Ag NPs), for their mass, respective size, and isotopic composition in an automated and unattended fashion. Here, an innovative autosampler was employed to mix and transport the blanks, standards, and samples into a high-efficiency single particle (SP) introduction system for subsequent analysis by inductively coupled plasma–time of flight–mass spectrometry (ICP-TOF-MS). Optimized NP transport efficiency into the ICP-TOF-MS was determined to be >80%. This combination, SP-ICP-TOF-MS, allowed for high-throughput sample analysis. Specifically, 50 total samples (including blanks/standards) were analyzed over 8 h, to provide an accurate characterization of the NPs. This methodology was implemented over the course of 5 days to assess its long-term reproducibility. Impressively, the in-run and day-to-day variation of sample transport is assessed to be 3.54 and 9.52% relative standard deviation (%RSD), respectively. The determination of Au NP size and concentration was of <5% relative difference from the certified values over these time periods. Isotopic characterization of the 107Ag/109Ag particles (n = 132,630) over the course of the measurements was determined to be 1.0788 ± 0.0030 with high accuracy (0.23% relative difference) when compared to the multi-collector–ICP-MS determination.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Isotope Analysis in Ecology · Analytical chemistry methods development · Mercury impact and mitigation studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Chemical Sciences Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831, USA

Elemental Scientific, Inc., Omaha, NE 68122, USA

TOFWERK AG, 3645 Thun, Switzerland

Radioisotope Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831, USA

Funding

Laboratory Directed Research and Development Program of Oak Ridge National Laboratory

References (34)

Show source-provided references
1. Thomas, R. (2013). A Practical Guide to ICP-MS, Taylor and Francis Group. [3rd ed.].10.1201/b14923 ↗
2. A fully automated direct injection nebulizer (d-DIHEN) for MC-ICP-MS isotope analysis: Application to boron isotope ratio measurements10.1039/C4JA00098F ↗
3. Multielement analysis of micro-volume biological samples by ICP-MS with highly efficient sample introduction system10.1016/j.talanta.2011.09.022 ↗
4. A highly efficient introduction system for single cell- ICP-MS and its application to detection of copper in single human red blood cells10.1016/j.talanta.2019.120174 ↗
5. Automated matrix-matching calibration using standard dilution analysis with two internal standards and a simple three-port mixing chamber10.1016/j.talanta.2019.120160 ↗
6. Determination of REEs in natural water by ICP-MS with the aid of an automatic column changing system10.1039/c003125a ↗
7. Rapid and automated separation of uranium ore concentrates for trace element analysis by inductively coupled plasma–optical emission spectroscopy/triple quadrupole mass spectrometry10.1016/j.sab.2021.106097 ↗
8. Automated separation of uranium and plutonium from environmental swipe samples for multiple collector inductively coupled plasma mass spectrometry10.1021/acs.analchem.8b02095 ↗
9. Novel sample introduction system to reduce ICP-OES sample size for plutonium metal trace impurity determination10.1007/s10967-015-4648-6 ↗
10. An automated micro-separation system for the chromatographic removal of uranium matrix for trace element analysis by ICP-OES10.1016/j.talanta.2018.06.063 ↗
11. Trace elemental analysis of bulk uranium materials using an inline automated sample preparation technique for ICP-OES10.1016/j.talanta.2018.08.031 ↗
12. A fully automated total metals and chromium speciation single platform introduction system for ICP-MS10.1039/C8JA00342D ↗
13. Fully automated chromatographic purification of Sr and Ca for isotopic analysis10.1039/C5JA00205B ↗
14. Rapid automated total arsenic and arsenic speciation by inductively coupled plasma mass spectrometry10.1039/D2JA00055E ↗
15. Evaluation of blood and synthetic matrix-matched calibrations using manual and inline sample preparation methods10.1039/D2JA00056C ↗
16. ICP-MS for the analysis at the nanoscale—A tutorial review10.1039/C8JA00037A ↗
17. Single particle ICP-MS: Advances toward routine analysis of nanomaterials10.1007/s00216-016-9676-8 ↗
18. A critical review of single particle inductively coupled plasma mass spectrometry–A step towards an ideal method for nanomaterial characterization10.1039/C9JA00206E ↗
19. High-throughput/high-precision sampling of single cells into ICP-MS for elucidating cellular nanoparticles10.1021/acs.analchem.8b04471 ↗
20. High-Throughput Sizing, Counting, and Elemental Analysis of Anisotropic Multimetallic Nanoparticles with Single-Particle Inductively Coupled Plasma Mass Spectrometry10.1021/acsnano.2c01840 ↗
21. Development of an automated on-line purification HPLC single cell-ICP-MS approach for fast diatom analysis10.1016/j.aca.2019.05.045 ↗
22. Improving detection capability for single particle inductively coupled plasma mass spectrometry with microdroplet sample introduction10.1039/D0JA00421A ↗
23. Dual-elemental analysis of single particles using quadrupole-based inductively coupled plasma-mass spectrometry10.1016/j.aca.2021.339389 ↗
24. Characterization of a new ICP-TOFMS instrument with continuous and discrete introduction of solutions10.1039/C6JA00400H ↗
25. Exploring the performance of quadrupole, time-of-flight, and multi-collector ICP-MS for dual-isotope detection on single nanoparticles and cells10.1016/j.aca.2022.340756 ↗
26. Determination and localization of specific proteins in individual ARPE-19 cells by single cell and laser ablation ICP-MS using iridium nanoclusters as label10.1016/j.talanta.2022.123974 ↗
27. Monte Carlo simulation of low-count signals in time-of-flight mass spectrometry and its application to single-particle detection10.1021/acs.analchem.8b01551 ↗
28. Determining transport efficiency for the purpose of counting and sizing nanoparticles via single particle inductively coupled plasma mass spectrometry10.1021/ac201952t ↗
29. Single particle inductively coupled plasma-mass spectrometry: A performance evaluation and method comparison in the determination of nanoparticle size10.1021/es301787d ↗
30. Post hoc interlaboratory comparison of single particle ICP-MS size measurements of NIST gold nanoparticle reference materials10.1021/acs.analchem.5b01741 ↗
31. Application of Isotopically Labeled Engineered Nanomaterials for Detection and Quantification in Soils via Single-Particle Inductively Coupled Plasma Time-of-Flight Mass Spectrometry10.1021/acs.est.2c03737 ↗
32. Direct detection and isotope analysis of individual particles in suspension by single particle mode MC-ICP-MS for nuclear safety10.1039/C4JA00339J ↗
33. Isotopic analysis of platinum from single nanoparticles using a high-time resolution multiple collector Inductively Coupled Plasma-Mass Spectroscopy10.1016/j.sab.2020.105881 ↗
34. Size and isotopic ratio measurements of individual nanoparticles by a continuous ion-monitoring method using Faraday detectors equipped on a multi-collector-ICP-mass spectrometer10.1039/D1JA00312G ↗