Wettability of Sn-3.0Ag-0.5Cu Solder Reinforced with TiO2 and Al2O3 Nanoparticles at Different Reflow Times
Source abstract
Abstract
This study investigated the influence of reinforcing 0.50 wt.% of titanium oxide (TiO2) and aluminium oxide (Al2O3) nanoparticles on the wettability performance of a Sn-3.0Ag-0.5Cu (SAC305) solder alloy. The thermal properties of the SAC305 nanocomposite solder are comparable with thos of an SAC305 solder with a peak temperature window within a range of 240 to 250 °C. The wetting behaviour of the non-reinforced and reinforced SAC305 nanocomposite solder was determined and measured using the contact angle and spreading area and the relationships between them were studied. There is an increment in the spreading area (5.6 to 7.32 mm) by 30.71% and a reduction in the contact angle (26.3 to 18.6°) by 14.29% with an increasing reflow time up to 60 s when reinforcing SAC305 solder with 0.50 wt.% of TiO2 and Al2O3 nanoparticles. The SAC305 nanocomposite solder has a better wetting performance compared with the SAC305 solder. As the reflow time increased, the spreading area increased and the contact angle decreased, which restricted intermetallic compound growth and thus improved wettability performance
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Electrical Contact Performance and Analysis · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Engineering and Technology, Multimedia University, Ayer Keroh 75450, Malacca, Malaysia
Faculty of Chemical Engineering and Technology, Universiti Malaysia Perlis, Arau 02600, Perlis, Malaysia
Funding
FRGS Research Grant
References (60)
Show source-provided references
1. Ghosh, S.K., Haseeb, A.S.M.A., and Amalina, A. (2013, January 11–13). Effects of metallic nanoparticle doped flux on interfacial intermetallic compounds between Sn3.0Ag-0.5Cu and copper substrate. Proceedings of the IEEE 15th Electronics Packaging Technology Conference (EPTC 2013), Singapore.10.1109/EPTC.2013.6745676 ↗
2. Properties and Microstructures of Sn-Ag-Cu-X Lead-Free Solder Joints in Electronic Packaging
3. Evolution of microstructure and failure mechanism of lead-free solder interconnections in power cycling and thermal shock tests10.1016/j.microrel.2006.07.095 ↗
4. Nanoparticles of SnAgCu lead-free solder alloy with an equivalent melting temperature of SnPb solder alloy10.1016/j.jallcom.2009.05.042 ↗
5. Assessing the replacement of lead in solders: Effects on resource use and human health10.1016/j.jclepro.2012.08.002 ↗
6. A critical review on performance, microstructure and corrosion resistance of Pb-free solders10.1016/j.measurement.2018.12.051 ↗
7. Reliability issues of lead-free solder joints in electronic devices10.1080/14686996.2019.1640072 ↗
8. Investigation of microstructure and wetting behavior of Sn–3.0Ag–0.5Cu (SAC305) lead-free solder with additions of 1.0 wt % SiC on copper substrate10.1016/j.intermet.2020.106991 ↗
9. Effects of TiO2 and Al2O3 nanoparticles addition on the thermal properties and wettability of Sn-3.0Ag-0.5Cu-xTiO2-xAl2O310.1088/1742-6596/2169/1/012003 ↗
10. The influence of a small amount of Al and Ni nano-particles on the microstructure, kinetics and hardness of Sn-Ag-Cu solder on OSP-Cu pads10.1016/j.intermet.2012.04.019 ↗
11. Effect of graphene nanosheets reinforcement on the performance of Sn–Ag–Cu lead-free solder10.1016/j.msea.2012.10.079 ↗
12. Review on the effect of alloying element and nanoparticle additions on the properties of Sn-Ag-Cu solder alloys10.1108/SSMT-02-2014-0001 ↗
13. The effect of Bi addition on the electrical and microstructural properties of SAC405 soldered structure10.1108/SSMT-10-2019-0029 ↗
14. Effect of γ-Fe2O3 nanoparticles size on the properties of Sn-1.0Ag-0.5Cu nano-composite solders and joints10.1016/j.jallcom.2015.11.213 ↗
15. Effect of multiple reflow cycles and Al2O3 nanoparticles reinforcement on performance of SAC305 lead-free solder alloy10.1007/s11665-018-3390-y ↗
16. Effect of nano-ZnO particles on wettability, interfacial morphology and growth kinetics of Sn-3.0Ag-0.5Cu-xAnO composite solder10.1007/s10854-019-02279-9 ↗
17. Effect of TiO2 addition concentration on the wettability and intermetallic compounds growth of Sn3.0Ag0.5Cu–xTiO2 nano-composite solders10.1007/s10854-014-2094-9 ↗
18. Effects of α-Al2O3 nanoparticles-doped on microstructure and properties of Sn–0.3Ag–0.7Cu low-Ag solder10.1007/s10854-018-8727-7 ↗
19. Reliability Study of Lead Free Sn-3.8Ag-0.7Cu and Copper (Cu) Substrate based on the Microstructure, Physical and Mechanical Properties
20. Effects of nano-Al2O3 additions on microstructure development and hardness of Sn3.5Ag0.5Cu solder10.1016/j.matdes.2010.04.033 ↗
21. Microstructure, kinetic analysis and hardness of Sn–Ag–Cu–1wt% nano-ZrO2 composite solder on OSP-Cu pads10.1016/j.jallcom.2010.12.048 ↗
22. Effect of Graphene Nanoplatelets on Wetting, Microstructure, and Tensile Characteristics of Sn-3.0Ag-0.5Cu (SAC) Alloy10.1007/s11661-015-3214-8 ↗
23. Effects of AlN Nanoparticles on the Microstructure, Solderability, and Mechanical Properties of Sn-Ag-Cu Solder10.1007/s11661-017-4178-7 ↗
24. Wettability and printability of SAC305-xTiO2 Pb-free solder paste on Cu substrate10.1088/1757-899X/635/1/012009 ↗
25. Effects of nano-Al2O3 particles on microstructure and mechanical properties of Sn3.5Ag0.5Cu composite solder ball grid array joints on Sn/Cu pads10.1016/j.matdes.2013.03.045 ↗
26. Influence of nanoparticle addition on the formation and growth of intermetallic compounds (IMCs) in Cu/Sn–Ag–Cu/Cu solder joint during different thermal conditions10.1088/1468-6996/16/3/033505 ↗
27. Zhang, P., Xue, S., Wang, J., Xue, P., Zhong, S., and Long, W. (2019). Effect of Nanoparticles Addition on the Microstructure and Properties of Lead-Free Solders: A Review. Appl. Sci., 9.10.3390/app9102044 ↗
28. Materials modification of the lead-free solders incorporated with micro/nano-sized particles: A review10.1016/j.matdes.2020.109224 ↗
29. Microstructure, mechanical and electrical performances of zirconia nanoparticles-doped tin-silver-copper solder alloys10.1007/s10854-016-4732-x ↗
30. Interfacial reaction-directed synthesis of a ceria nanotube-embedded ultra-small Pt nanoparticle catalyst with high catalytic activity and thermal stability10.1039/C6TA05413G ↗
31. Interface reaction and intermetallic compound growth behavior of Sn-Ag-Cu lead-free solder joints on different substrates in electronic packaging10.1007/s10853-018-2907-y ↗
32. Synthesis and characterization of ceramic nanoparticles reinforced lead-free solder10.1016/j.ceramint.2017.01.067 ↗
33. Effect of nano-Al2O3 reinforcement on the microstructure and reliability of Sn–3.0Ag–0.5Cu solder joints10.1016/j.microrel.2016.03.005 ↗
34. Effect of nano-TiO2 particles and cooling rate on the thermal, microstructure and mechanical properties of novel low-ag Sn1.5Sb1Ag solders10.1016/j.msea.2016.01.115 ↗
35. Effect of nano-Fe2O3 additions on wettability and interfacial intermetallic growth of low-Ag content Sn–Ag–Cu solders on Cu substrates10.1016/j.jallcom.2014.12.024 ↗
36. Structural analysis on nanocomposites lead free solder using nanoindentation
37. Development of low-silver content SAC0307 solder alloy with Al2O3 nanoparticles10.1016/j.msea.2020.139439 ↗
38. Effect of TiO2 nanoparticles on the microstructure, mechanical and thermal properties of rapid quenching SAC355 lead-free solder alloy10.1108/SSMT-01-2022-0003 ↗
39. Growth mechanism of intermetallic compounds and damping properties of Sn–Ag–Cu-1wt% nano-ZrO2 composite solders10.1016/j.microrel.2014.01.026 ↗
40. Effects of Nano-TiO2 additions on thermal analysis, microstructure and tensile properties of Sn3.5Ag0.25Cu solder10.1016/j.matdes.2009.08.008 ↗
41. Effect of addition of TiO2 nanoparticles on the microstructure, microhardness and interfacial reactions of Sn3.5AgxCu solder10.1016/j.matdes.2011.06.044 ↗
42. Effect on the wettability, hardness and shear strength properties of 3%-nano Titanium Oxide (TiO2) added Sn-3.8Ag-0.7Cu (SAC)/Copper (Cu) solder joint
43. Influence of bismuth (Bi) addition on wetting characteristics of Sn-3Ag-0.5Cu solder alloy on Cu substrate
44. Gao, Y., Bian, X., Qiu, X., Jia, Y., Yi, J., and Wang, G. (2023). Investigation of Microstructure and Mechanical Properties of SAC105 Solders with Sb, In, Ni, and Bi Additions. Materials, 16.10.3390/ma16114059 ↗
45. Low temperature In–Bi–Zn solder alloy on copper substrate10.1007/s10854-015-3904-4 ↗
46. A review of solder evolution in electronic application
47. Wettability and strength of In–Bi–Sn lead-free solder alloy on copper substrate10.1016/j.jallcom.2010.07.182 ↗
48. Structure and properties of lead-free solders bearing micro and nano particles10.1016/j.mser.2014.06.001 ↗
49. Research advances in nano-composite solders10.1016/j.microrel.2008.10.004 ↗
50. Suganuma, K. (2004). Lead-Free Soldering in Electronics: Science, Technology and Environmental Impact, CRC Press. [1st ed.].10.1201/9780203025772.ch11 ↗
51. Interfacial IMC growth of SAC305/Cu joint with a novel dual-layer of Ni(P)/Cu plating during solid-state aging10.1016/j.mee.2018.07.020 ↗
52. Effect of electromigration on intermetallic compound formation in line-type Cu/Sn/Cu interconnect10.1016/j.jallcom.2010.05.158 ↗
53. Direct evidence for a Cu-enriched region at the boundary between Cu6Sn5 and Cu3Sn during Cu/Sn reaction10.1016/j.scriptamat.2010.04.011 ↗
54. Intermetallic compounds growth between Sn-3.5Ag lead-free solder and Cu substrate by dipping method10.1016/j.jallcom.2004.09.023 ↗
55. The growth and roughness evolution of intermetallic compounds of Sn-Ag-Cu/Cu interface during soldering reaction10.1016/j.jallcom.2007.04.047 ↗
56. Alloying influences on low melt temperature SnZn and SnBi solder alloys for electronic interconnections10.1016/j.jallcom.2016.01.006 ↗
57. Effect of alumina nanoparticles on the microstructure and mechanical durability of meltspun lead-free solders based on tin alloys10.1016/j.jallcom.2016.06.296 ↗
58. Influence of TiO2 nanoparticles on IMC growth in Sn–3.0Ag–0.5Cu–xTiO2 solder joints in reflow process10.1016/j.jallcom.2012.12.019 ↗
59. Suppressing effect of 0.5 wt.% nano-TiO2 addition into Sn–3.5Ag–0.5Cu solder alloy on the intermetallic growth with Cu substrate during isothermal aging10.1016/j.jallcom.2011.05.116 ↗
60. Strengthening mechanism of nano-Al2O3 particles reinforced Sn3.5Ag0.5Cu lead-free solder10.1007/s10854-010-0253-1 ↗