Polymer Binders of Ceramic Nanoparticles for Precision Casting of Nickel-Based Superalloys
Source abstract
Abstract
This study presents the general characteristics of binders used in precision casting of Nickel-based superalloys. Three groups of binders were described: resins, organic compounds, and materials containing nanoparticles in alcohol or aqueous systems. This study also includes literature reports on materials commonly used and those recently replaced by water-soluble binders, i.e., ethyl silicate (ES) and hydrolysed ethyl silicate (HES). The appearance of new and interesting solutions containing nano-alumina is described, as well as other solutions at the initial stage of scientific research, such as those containing biopolymers, biodegradable polycaprolactone (PCL), or modified starch. Special attention is paid to four binders containing nano-SiO2 intended for the first layers (Ludox AM, Ludox SK) and structural layers (EHT, Remasol) of shell moulds. Their morphology, viscosity, density, reactions, and electrokinetic potential were investigated. The binders were characterized by a high solid-phase content (>28%), viscosity, and density close to that of water (1–2 mPa·s) and good electrokinetic stability. The nanoparticles contained in the binders were approximately spherically shaped with an average particle size of 16–25 nm.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Materials Engineering and Processing · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Materials Science and Engineering, Warsaw University of Technology, Wołoska 141, 02-507 Warsaw, Poland
References (58)
Show source-provided references
1. Lewandowski, J.L. (1997). Tworzywa na Formy Odlewnicze, Wydawnictwo Naukowe Akapit.
2. Reed, R.C. (2006). The Superalloys, Fundamentals and Applications, Cambridge University Press.10.1017/CBO9780511541285 ↗
3. Advances in shell moulding for investment casting10.1016/S0924-0136(02)00907-X ↗
4. Three-Dimensional Probabilistic Simulation of Solidification Grain Structures: Application to Superalloy Precision Castings10.1007/BF02657334 ↗
5. Perzyk, M. (2009). Odlewnictwo, Wydawnictwo Naukowo-Techniczne.
6. Hong, J., Ma, D., Wang, J., Wang, F., Sun, B., Dong, A., Li, F., and Bührig-Polaczek, A. (2016). Freckle Defect Formation near the Casting Interfaces of Directionally Solidified Superalloys. Materials, 9.10.3390/ma9110929 ↗
7. Effect of adding water-based binders on the technological properties of ceramic slurries based on silicon carbide
8. An overview of ceramic molds for investment casting of nickel superalloys10.1016/j.jeurceramsoc.2020.07.013 ↗
9. Developments in investment casting process—A review10.1016/j.jmatprotec.2012.06.003 ↗
10. Modeling of shrinkage during investment casting of thin-walled hollow turbine blades10.1016/j.jmatprotec.2017.01.005 ↗
11. New technique for measuring permeability of cores made from various sands, binders, additives and coatings
12. Rheological properties of ceramic slurries with colloidal binders used in the investment casting technology
13. Enhancing the permeability and properties of ceramic shell in investment casting process using ABS powder and needle coke10.1007/s40962-018-00297-7 ↗
14. Characterization and Properties of Ceramic Shells in Investment Casting Process
15. Influence of complex structure on the shrinkage of part in investment casting process10.1007/s00170-014-6523-y ↗
16. Strength properties of ceramic moulds containing spent moulding sand after initial reclamation10.24425/afe.2019.127127 ↗
17. Wiśniewski, P., Sitek, R., Towarek, A., Choińska, E., Moszczyńska, D., and Mizera, J. (2020). Molding Binder Influence on the Porosity and Gas Permeability of Ceramic Casting Molds. Materials, 13.10.3390/ma13122735 ↗
18. Huang, P., Lu, G., Yan, Q., and Mao, P. (2019). Effect of Ceramic and Nylon Fiber Content on Composite Silica Sol Slurry Properties and Bending Strength of Investment Casting Shell. Materials, 12.10.3390/ma12172788 ↗
19. Haratym, R., Biernacki, R., and Myszka, D. (2008). Ekologiczne Wytwarzanie Dokładnych Odlewów w Formach Ceramicznych, Oficyna Wydawnicza Politechniki Warszawskiej.
20. Comparison of the Emission of Aromatic Hydrocarbons from Moulding Sands with Furfural Resin with the Low Content of Furfuryl Alcohol and Different Activators10.1515/afe-2016-0107 ↗
21. Studies of the Thermal Degradation of the BioCo3 Polymer Binder
22. Thermal deformation of moulding sands with biopolymer binders
23. Aromatic compounds in waste gases formed during thermal decomposition of foundry binders
24. Selection of hardening technology of moulding sand with hydrated sodium silicate binder devoted to aluminum alloys ablation casting
25. Synthetic biodegradable polymers as medical devices
26. Protein—Based binder update: Performance put to the Test
27. Study on biodegradability of PCL/SAN blend using composting method10.1016/0141-3910(96)00032-8 ↗
28. Green polymers10.1016/S0141-3910(99)00182-2 ↗
29. Polyolefins with controlled environmental degradability10.1016/j.polymdegradstab.2005.09.010 ↗
30. Biological degradation of plastics: A comprehensive review10.1016/j.biotechadv.2007.12.005 ↗
31. Enzymatic degradation of plastics containing polycaprolactone10.1016/0141-3910(94)90138-4 ↗
32. Poly(ε-caprolactone) Blends10.1007/3-540-48838-3_2 ↗
33. (1978). Sposób Otrzymywania Krzemionki Koloidalnej w Roztworze Wodnym. (P-116013), Polish Patent.
34. Wojnowski, W., Przyjemska, K., Konieczny, S., Karwiński, A., Stachańczyk, J., Luśniak, L., and Piech, K. (1985). Spoiwo Kopolimerowe Sikop. (PAT.135579), Polish Patent.
35. Niektóre Problemy Wytrzymałości Cienkościennych Form Odlewniczych
36. Doles, R.S. (2003). Method of Increasing the Strength and Solids Level of Investment Casting Shells. (6540013), U.S. Patent.
37. Guerra, M. (1997). Fast Processing Water Based Binder System. (5629369), U.S. Patent.
38. Permafrost Analysis Methodology (Pam) For Ceramic Shell Deformation in the Firing Process10.1007/s40962-019-00317-0 ↗
39. Accuracy of Ceramic Mould Filling with Liquid AlSi9 Aluminium Alloy in the Process Using Back-pressure
40. Karwiński, A., Adamczyk, Z., and Stachańczyk, J. (2001). Spoiwo Krzemianowe Nieorganiczne w Wodnym Roztworze EKOSIL. (Pat.182949), Polish Patent.
41. Review: Ethyl silicate binders for high performance coatings10.1016/S0300-9440(01)00128-X ↗
42. Application of a Hydrolyzed Ethyl Silicate in Investment Casting10.1134/S0020168510050225 ↗
43. Colloidal silica as a nostructured binder for refractory castables
44. Wiśniewski, P. (2020). Evaluating Silicon Carbide-Based Slurries and Molds for the Manufacture of Aircraft Turbine Components by the Investment Casting. Crystals, 10.10.3390/cryst10060433 ↗
45. Polytypism and Properties of Silicon Carbide10.1002/1521-3951(199707)202:1<35::AID-PSSB35>3.0.CO;2-8 ↗
46. Reaction between SiC surface and aqueous solutions containing Al Ions10.1016/S0927-7757(97)00084-8 ↗
47. Organic Viscosity Modifiers for Controlling Rheology of Ceramic Slurries Used in the Investment Casting10.4028/www.scientific.net/AST.70.102 ↗
48. Technological properties of SiC-based ceramic slurries for manufacturing investment casting shell moulds10.2478/amm-2014-0180 ↗
49. Technological Properties of Ceramic Slurries Based on Silicon Carbide with Poly (vinyl alcohol) Addition for Shell Moulds Fabrication in Precision Casting Process10.12693/APhysPolA.129.528 ↗
50. Badania właściwości reologicznych ceramicznych mas lejnych do odlewania precyzyjnego części turbin lotniczych
51. Książek, M., Tchórz, A., Krzak, I., Żaba, K., Kurdziel, P., Dydak, A., Sitek, R., and Mizera, J. (2018, January 23–27). An investigation on microstructural and mechanical properties of ceramic moulds applied in the investment casting of critical parts of aircraft engines. Proceedings of the 73rd World Foundry Congress, Kraków, Poland.
52. Nowicki, J. (2018). Badanie Właściwości Mas Lejnych Oraz Form Ceramicznych na Bazie SiC. [Master’s Thesis, Faculty of Materials Science and Engineering, Warsaw University of Technology].
53. Budzik, G., Ferenc, J., Jakubowicz, G., Kurzydłowski, K.J., Lipiński, Z., Matysiak, H., Michalski, J., Wawulska, P., and Zych, J. Formy ceramiczne do odlewania precyzyjnego techniką wytapianych modeli, unpublished.
54. Nanonapełniacze kompozytów polierowych Nanonapełniacze kompozytów polimerowych
55. Bergna, H.E., and Roberts, W.O. (2006). Colloidal Silica Fundamentals and Applications, CRC Press.10.1201/9781420028706 ↗
56. Beeley, P.R., and Smart, R.F. (1995). Investment Casting, The University Press Cambridge.
57. Charakterystyka i kontrola właściwości technologicznych mieszanek ceramicznych do wytworzenia form odlewniczych do odlewania precyzyjnego części turbin lotniczych metodą Bridgmana
58. Surface charge and zeta potential of silica In mixtures of organic solvents and water