Phase Transitions of Cu and Fe at Multiscales in an Additively Manufactured Cu–Fe Alloy under High-Pressure
Source abstract
Abstract
A state of the art, custom-built direct-metal deposition (DMD)-based additive manufacturing (AM) system at the University of Michigan was used to manufacture 50Cu–50Fe alloy with tailored properties for use in high strain/deformation environments. Subsequently, we performed preliminary high-pressure compression experiments to investigate the structural stability and deformation of this material. Our work shows that the alpha (BCC) phase of Fe is stable up to ~16 GPa before reversibly transforming to HCP, which is at least a few GPa higher than pure bulk Fe material. Furthermore, we observed evidence of a transition of Cu nano-precipitates in Fe from the well-known FCC structure to a metastable BCC phase, which has only been predicted via density functional calculations. Finally, the metastable FCC Fe nano-precipitates within the Cu grains show a modulated nano-twinned structure induced by high-pressure deformation. The results from this work demonstrate the opportunity in AM application for tailored functional materials and extreme stress/deformation applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and Engineering, University of Michigan, Ann Arbor, MI 48109, USA
Argonne National Laboratory, HPCAT, X-ray Science Division, Lemont, IL 60439, USA
Lawrence Livermore National Laboratory, Physics Division, Livermore, CA 94550, USA
Department of Mechanical Engineering, University of Michigan, Ann Arbor, MI 48109, USA
Funding
Department of Energy-National Nuclear Security Administration (DOE-NNSA)
References (66)
Show source-provided references
1. The Metallurgy and Processing Science of Metal Additive Manufacturing10.1080/09506608.2015.1116649 ↗
2. Microstructural Control of Additively Manufactured Metallic Materials10.1146/annurev-matsci-070115-031816 ↗
3. Additive Manufacturing of Metals10.1016/j.actamat.2016.07.019 ↗
4. Metal Alloys for Fusion-Based Additive Manufacturing10.1002/adem.201700952 ↗
5. Metal Additive Manufacturing: A Review10.1007/s11665-014-0958-z ↗
6. Additive Manufacturing of Metallic Components—Process, Structure and Properties10.1016/j.pmatsci.2017.10.001 ↗
7. Hierarchical Microstructures and Deformation Behavior of Laser Direct-Metal-Deposited Cu–Fe Alloys10.1016/j.msea.2020.140659 ↗
8. Additive Manufacturing of High Strength Copper Alloy with Heterogeneous Grain Structure through Laser Powder Bed Fusion10.1016/j.actamat.2021.117311 ↗
9. Hierarchical Microstructure and Strengthening Mechanism of Cu-36. 8Fe Alloy Manufactured by Selective Laser Melting10.1016/j.jallcom.2021.162701 ↗
10. Polymorphism of Iron at High Pressure10.1063/1.1722359 ↗
11. Effect of Coherency on Coarsening of Second-Phase Precipitates in Cu-Base Alloys10.1007/s10853-007-2373-4 ↗
12. High-Pressure A⇄ε Martensitic Transformation in Iron10.1063/1.1659768 ↗
13. Shock Wave Study of the α ⇄ ε Phase Transition in Iron10.1063/1.1663148 ↗
14. Mechanism of the α-ε Phase Transformation in Iron10.1103/PhysRevB.91.174105 ↗
15. Raman Spectroscopy of Iron to 152 Gigapascals: Implications for Earth’s Inner Core10.1126/science.288.5471.1626 ↗
16. Mechanism of the Body-Centered Cubic-Hexagonal Close-Packed Phase Transition in Iron10.1126/science.238.4828.780 ↗
17. In Situ Radial X-ray Diffraction Study of Texture and Stress during Phase Transformations in Bcc-, Fcc-and Hcp-Iron up to 36 GPa and 1000 K10.1016/j.actamat.2013.04.068 ↗
18. Mechanical Properties of Cu-Fe Alloys in the Transition from Solid Solution to Precipitation Hardening10.1016/0001-6160(82)90176-6 ↗
19. The Precipitation Hardening of Cu-Fe Alloy Single Crystals with Coherent y-Iron Particles10.2320/matertrans1960.19.53 ↗
20. Microstructural Fingerprints of Phase Transitions in Shock-Loaded Iron10.1038/srep01086 ↗
21. Direct Observation of the α-ε Transition in Shock-Compressed Iron via Nanosecond X-ray Diffraction10.1103/PhysRevLett.95.075502 ↗
22. Rare Twin Linked to High-Pressure Phase Transition in Iron10.1016/j.scriptamat.2009.01.014 ↗
23. On the Process of Transition of the Cubic-Body-Centered Modification into the Hexagonal-Close-Packed Modification of Zirconium10.1016/S0031-8914(34)80244-3 ↗
24. Nano-Ferrite Formation and Strain-Induced-Ferrite Transformation in an SUS316L Austenitic Stainless Steel10.1016/S1359-6462(01)00858-2 ↗
25. Shear-Induced α → γ Transformation in Nanoscale Fe-C Composite10.1016/j.actamat.2005.11.034 ↗
26. Experimental Study of the Bcc-Fcc Phase Transformations in the Fe-Rich System Fe-Si at High Pressures10.1007/s002690050203 ↗
27. Precipitates-Interaction Capture of Nano-Sized Iron-Rich Precipitates during Copper Solidification10.1080/02670836.2019.1578918 ↗
28. Strengthening Mechanisms of Fe Nanoparticles for Single Crystal Cu-Fe Alloy10.1016/j.msea.2015.03.081 ↗
29. Determination of the Interface Energies of Spherical, Cuboidal and Octahedral Face-Centered Cubic Precipitates in Cu-Co, Cu-Co-Fe and Cu-Fe Alloys10.1016/j.actamat.2008.12.028 ↗
30. Plastic Deformation and Martensitic Transformation of γ-Fe Particle in Cu-Fe Single Crystal10.2320/matertrans1960.25.863 ↗
31. Structural Changes of Iron Particles in a Deformed and Annealed Cu-Fe Alloy Single Crystal10.2320/matertrans1960.22.65 ↗
32. On the Nucleation of Martensite in Iron Precipitates10.1016/0001-6160(69)90104-7 ↗
33. Structure of Martensite in Very Small Iron-Rich Precipitates10.1016/0001-6160(75)90152-2 ↗
34. Epitaxial Bain Paths and Metastable Phases from First-Principles Total-Energy Calculations10.1103/PhysRevB.66.064111 ↗
35. Structural Stability and Lattice Defects in Copper: Ab Initio, Tight-Binding, and Embedded-Atom Calculations10.1103/PhysRevB.63.224106 ↗
36. Epitaxial Growth of a Metastable Modification of Copper with Body-Centered-Cubic Structure10.1103/PhysRevB.35.9322 ↗
37. First-Principles Determination of the Bulk Phase Diagram for Body-Centered-Tetragonal Copper: Application to Epitaxial Growth of Cu on Fe{100}10.1103/PhysRevB.39.1575 ↗
38. Precipitation Hardening10.1007/BF02670416 ↗
39. Structure and Mechanical Properties of Copper/Niobium Multilayers10.1111/j.1151-2916.1997.tb03037.x ↗
40. Observation of Body Centered Cubic Cu in Cu/Nb Nanolayered Composites10.1063/1.119611 ↗
41. Electronic Properties of Body-Centred-Tetragonal Copper10.1088/0953-8984/3/37/011 ↗
42. Epitaxial Growth of Body-Centered-Tetragonal Copper10.1103/PhysRevB.40.5841 ↗
43. Low-Energy Electron Diffraction and Photoemission Study of Epitaxial Films of Cu on Ag{001}10.1103/PhysRevB.43.6342 ↗
44. Structural Stability of Higher-Energy Phases and Its Relation to the Atomic Configurations of Extended Defects: The Example of Cu10.1103/PhysRevB.60.844 ↗
45. Competitive Bcc and Fcc Crystal Nucleation from Non-Equilibrium Liquids Studied by Phase-Field Crystal Simulation10.1016/j.actamat.2017.08.015 ↗
46. Molecular Dynamics Simulations of Martensitic Fcc-to-Hcp Phase Transformations in Strained Ultrathin Metallic Films10.1103/PhysRevB.78.195408 ↗
47. Hexagonal Close-Packed Copper: Theory and Experiment10.1103/PhysRevB.68.172101 ↗
48. The Laser Micro-Machining System for Diamond Anvil Cell Experiments and General Precision Machining Applications at the High Pressure Collaborative Access Team10.1063/1.4926889 ↗
49. New Developments in Micro-X-ray Diffraction and X-ray Absorption Spectroscopy for High-Pressure Research at 16-BM-D at the Advanced Photon Source10.1063/1.4926893 ↗
50. Developments in Time-Resolved High Pressure x-Ray Diffraction Using Rapid Compression and Decompression10.1063/1.4926887 ↗
51. Popov, D., Velisavljevic, N., and Somayazulu, M. (2019). Mechanisms of Pressure-Induced Phase Transitions by Real-Time Laue Diffraction. Crystals, 9.10.3390/cryst9120672 ↗
52. Calibration of the Ruby Pressure Gauge to 800 Kbar under Quasi-Hydrostatic Conditions10.1029/JB091iB05p04673 ↗
53. DIOPTAS: A Program for Reduction of Two-Dimensional X-ray Diffraction Data and Data Exploration10.1080/08957959.2015.1059835 ↗
54. Two-Dimensional Detector Software: From Real Detector to Idealised Image or Two-Theta Scan10.1080/08957959608201408 ↗
55. Subramanian, P.R. (1994). Phase Diagrams of Binary Copper Alloys, ASM International.
56. Kurz, W., and Fisher, D. (1989). Fundamentals of Solidification. 1, Trans Tech Publications.
57. Understanding Thermal Behavior in the LENS Process10.1016/S0261-3069(99)00016-3 ↗
58. Theoretical Fcc→bcc Transition under [100] Tensile Loading10.1103/PhysRevLett.44.277 ↗
59. Shear Deformation, Ideal Strength, and Stacking Fault Formation of Fcc Metals: A Density-Functional Study of Al and Cu10.1103/PhysRevB.79.224103 ↗
60. Structural Stability of Higher-Energy Phases in Cu and Cu-Fe Alloy Revealed by Ab Initio Calculations10.1016/j.commatsci.2013.06.056 ↗
61. A Metastable Phase of Shocked Bulk Single Crystal Copper: An Atomistic Simulation Study10.1038/s41598-017-07809-1 ↗
62. Fcc→bcc→hcp Successive Phase Transformations in the Strained Ultrathin Copper Film: A Molecular Dynamic Simulation Study10.1016/j.matchemphys.2018.09.045 ↗
63. Transmission Electron Microscope Investigations of the Structure of Copper Precipitates in Thermally-Aged Fe-Cu and Fe-Cu-Ni10.1080/09500839108215121 ↗
64. High-Resolution Electron Microscopy Studies of the Structure of Cu Precipitates in α-Fe
65. Atomistic Study of the Fcc → Bcc Transformation in a Binary System: Insights from the Quasi-Particle Approach10.1016/j.actamat.2021.117599 ↗
66. A Lattice Resolution Study of the Martensitic Transformation of Small Iron Particles in a Copper Matrix10.1016/0001-6160(85)90150-6 ↗