journal article·2021-10-29Open access

Surface Alloying and Improved Property of Nb on TC4 Induced by High Current Pulsed Electron Beam

Xueze Du, Nana Tian, Conglin Zhang, Peng Lyu, Jie Cai, Qingfeng Guan

Nanomaterials· Volume 11· Issue 11

Abstract

In this paper, an Nb alloying layer on a TC4 alloy was fabricated by using high-current pulsed electron beam (HCPEB) irradiation to improve surface performance. X-ray diffraction (XRD), optical microscopy (OM), laser surface microscope (LSM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to characterize the phase composition and microstructure of the surface layer. The microhardness, wear tests and corrosion resistance were also examined. The results show that after HCPEB alloying, a Nb-alloyed layer was formed with about 3.6 μm in thickness on the surface of the sample, which was mainly composed of α’-Ti martensite, β-Ti equiaxial crystals, and NbTi4 particles. After HCPEB irradiation, the surface hardness, wear resistance and corrosion resistance of Nb alloying layer on TC4 alloy were improved compared to the initial samples.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Pulsed Power Technology Applications · Metal and Thin Film Mechanics · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Jiangsu University, Zhenjiang 212013, China

School of Materials Science and Engineering, Yancheng Institute of Technology, Yancheng 224051, China

Engineering Institute of Advanced Manufacturing and Modern Equipment Technology, Jiangsu University, Zhenjiang 212013, China

Funding

National Natural Science Foundation of China · Jiangsu Province Natural Science Foundation for Youths

References (49)

Show source-provided references
1. Microstructure evolution of TC4 powder by spark plasma sintering after hot deformation10.1515/htmp-2020-0002 ↗
2. Characterization of titanium alloy Ti-6Al-4V for chemical, marine and industrial applications10.1016/j.matchar.2003.10.006 ↗
3. Surface alloying of Cr on Ti6Al4V alloy induced by high-current pulse electron beam10.1016/j.surfcoat.2019.05.009 ↗
4. Fatigue and wear properties of Ti-6Al-4V alloy with Cr/CrN multilayer coating10.1016/j.surfcoat.2015.05.014 ↗
5. Formation process and cross-sectional hardness of a Cr-alloyed layer on Ti6Al4V alloy10.1016/j.matlet.2015.09.024 ↗
6. High-temperature tribological behaviors of TiNi/Ti2Ni alloyed layer on surface of Ti6Al4V alloy10.1142/S0218625X17500287 ↗
7. Plasma niobium alloying on Ti6Al4V alloy surface and its wear resistance
8. Enhanced plasma boriding with molybdenum using double glow plasma surface alloying technique10.1016/j.matlet.2012.05.069 ↗
9. Surface modification of CrFeCoNiMo high entropy alloy induced by high-current pulsed electron beam10.1016/j.apsusc.2019.144453 ↗
10. A mechanism of microcrater formation in metallic material irradiated by a low-energy high-current electron beam10.1134/S1063785016030275 ↗
11. Surface modification and alloying of metallic materials with low-energy high-current electron beams10.1016/j.surfcoat.2003.10.085 ↗
12. The microstructure and properties of nanostructured Cr-Al alloying layer fabricated by high-current pulsed electron beam10.1016/j.vacuum.2019.06.022 ↗
13. Studies on surface topography and mechanical properties of TiN coating irradiated by high current pulsed electron beam10.1016/j.nimb.2018.09.003 ↗
14. Surface alloying of stainless steel 316 with copper using pulsed electron-beam melting of film-substrate system10.1016/j.surfcoat.2005.11.007 ↗
15. Zhang, L., Peng, C.T., Guan, J., Lv, P., Guan, Q., and Lu, R. (2019). Nanocrystalline Cr-Ni alloying layer induced by high-current pulsed electron beam. Nanomaterials, 9.10.3390/nano9010074 ↗
16. Microstructures and corrosion resistance of Zircaloy-4 after surface alloying with copper by high-current pulsed electron beam10.1016/j.apsusc.2019.144222 ↗
17. Pulsed electron-beam technology for surface modification of metallic materials10.1116/1.581369 ↗
18. Tribological behaviors of Ti-6Al-4V alloy with surface plasma molybdenized layer10.1016/j.surfcoat.2012.05.134 ↗
19. Mechanisms of hardening, wear and corrosion improvement of 316 L stainless steel by low energy high current pulsed electron beam surface treatment10.1016/j.tsf.2010.09.022 ↗
20. Surface microstructure and properties of Cu-C powder metallurgical alloy induced by high-current pulsed electron beam10.1016/j.jallcom.2016.12.119 ↗
21. Temperature profile and crater formation induced in high-current pulsed electron beam processing10.1116/1.1619417 ↗
22. Surface modification of Cu-W powder metallurgical alloy induced by high-current pulsed electron beam10.1016/j.powtec.2017.11.037 ↗
23. Influence of a large pulsed electron beam (LPEB) on the corrosion resistance of Ti-6Al-7Nb alloys10.1016/j.corsci.2014.10.008 ↗
24. Cross-sectional analysis of the graded microstructure and residual stress distribution in a TiNi alloy treated with low energy high-current pulsed electron beam10.1016/j.mtcomm.2018.08.018 ↗
25. Deformation induced martensite and superelasticity in a β-metastable titanium alloy10.1016/S0921-5093(00)00921-7 ↗
26. Phase separation and ω transformation in binary V-Ti and ternary V-Ti-Cr alloys10.1016/j.actamat.2016.09.028 ↗
27. Surface modification of pure titanium by high current pulsed electron beam10.4028/www.scientific.net/AMR.560-561.994 ↗
28. Surface modification of pure titanium by pulsed electron beam10.1016/j.apsusc.2011.01.136 ↗
29. Surface alloys of 0.45 C carbon steel produced by high current pulsed electron beam10.1515/htmp-2018-0065 ↗
30. Study on the microstructural evolution of Ti-Nb based alloy obtained by high-energy ball milling10.1016/j.jallcom.2017.05.262 ↗
31. Phase evolution in laser-deposited titanium-chromium alloys10.1007/s11661-002-0044-2 ↗
32. Investigation on ultrasonic cavitation erosion of TiMo and TiNb alloys in sulfuric acid solution10.1016/j.ultsonch.2019.104877 ↗
33. Deformation twinning in h.c.p. metals and alloys
34. Twins formation and their role in nanostructuring of zirconium10.1016/j.msea.2009.05.057 ↗
35. Structural decomposition and phase changes in TiNi surface layer modified by low-energy high-current pulsed electron beam10.1016/j.jallcom.2019.06.322 ↗
36. Microstructure and properties of Cu-Cr powder metallurgical alloy induced by high-current pulsed electron beam10.1016/j.jallcom.2018.04.291 ↗
37. Effect of high current pulsed electron beam irradiation on wear and corrosion resistance of Ti6Al4V10.1016/j.surfcoat.2012.08.009 ↗
38. Microstructure and properties of low carbon steel after surface alloying induced by high current pulsed electron beam10.1016/j.nimb.2017.08.007 ↗
39. Dry sliding wear of Ti-6Al-4V alloy as influenced by the counterface and sliding conditions10.1016/S0043-1648(99)00292-6 ↗
40. Dry sliding wear mechanisms of the Ti6A14V alloy10.1016/S0043-1648(96)07454-6 ↗
41. Internal nitridation of nickel-base alloys. Part, I. Behavior of binary and ternary alloys of the Ni-Cr-Al-Ti system10.1023/A:1018843612011 ↗
42. Tribological and corrosion behaviors of bulk Cu-W nanocomposites fabricated by mechanical alloying and warm pressing10.1016/j.jallcom.2016.03.141 ↗
43. Corrosion resistance of AZ91 Mg alloy modified by high-current pulsed electron beam10.1007/s40195-018-0798-1 ↗
44. Surface modification of 40CrNiMo7 steel with high current pulsed electron beam treatment10.1016/j.nimb.2015.11.039 ↗
45. Improved pitting corrosion resistance of AISI 316L stainless steel treated by high current pulsed electron beam10.1016/j.surfcoat.2006.02.008 ↗
46. AFM and SEM characterization of non-toxic vanadium-free Ti alloys used as biomaterials10.1016/S0169-4332(03)00746-3 ↗
47. Effect of thermocycling on the microstructure of Ti-6Al-4V alloy in simulated low Earth orbit space environment10.1007/s40843-016-5029-9 ↗
48. Hot corrosion behaviour of thermally sprayed CoCrAlY coating irradiated by high-current pulsed electron beam10.1016/j.jallcom.2019.01.071 ↗
49. Surface modifications of a cold rolled 2024 Al alloy by high current pulsed electron beams10.1016/j.apsusc.2019.144382 ↗