journal article·2020-01-16Open access

Tuning the Mechanical and Adhesion Properties of Carbon Nanotubes Using Aligned Cellulose Wrap (Cellulose Nanotube): A Molecular Dynamics Study

Mehdi Shishehbor, M. Reza Pouranian

Nanomaterials· Volume 10· Issue 1

Abstract

Improving the adhesion properties of carbon nanotubes (CNTs) at the molecular scale can significantly enhance dispersion of CNT fibers in polymer matrix and unleash the dormant extraordinary mechanical properties of CNTs in CNT-polymer nanocomposites. Inspired by the outstanding adhesion, dispersion, mechanical, and surface functionalization properties of crystalline nanocellulose (CNC), this paper studies the mechanical and adhesion properties of CNT wrapped by aligned cellulose chains around CNT using molecular dynamic simulations. The strength, elastic modulus, and toughness of CNT-cellulose fiber for different cellulose contents are obtained from tensile and compression tests. Additionally, the effect of adding cellulose on the surface energy, interfacial shear modulus, and strength is evaluated. The result shows that even adding a single layer cellulose wrap (≈55% content) significantly decreases the mechanical properties, however, it also dramatically enhances the adhesion energy, interfacial shear strength, and modulus. Adding more cellulose layers, subsequently, deceases and increases mechanical properties and adhesion properties, respectively. In addition, analysis of nanopapers of pristine CNT, pristine CNC, and CNT-wrapped cellulose reveals that CNT-wrapped cellulose nanopapers are strong, stiff, and tough, while for CNT and CNC either strength or toughness is compromised. This research shows that cellulose wraps provide CNT fibers with tunable mechanical properties and adhesion energy that could yield strong and tough materials due to the excellent mechanical properties of CNT and active surface and hydrogen bonding of cellulose.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Cellulose Research Studies · Natural Fiber Reinforced Composites · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Civil Engineering, Purdue University, West Lafayette, IN 47907, USA

References (72)

Show source-provided references
1. Multiscale toughening mechanisms in biological materials and bioinspired designs10.1002/adma.201901561 ↗
2. Analysis of bioinspired non-interlocking geometrically patterned interfaces under predominant mode I loading10.1016/j.jmbbm.2019.04.047 ↗
3. A two-step multiscale model to predict early age strength development of cementitious composites considering competing fracture mechanisms10.1016/j.conbuildmat.2019.02.134 ↗
4. Pouranian, M.R., Shishehbor, M., and Haddock, J.E. (2020). Impact of the coarse aggregate shape parameters on compaction characteristics of asphalt mixtures. Powder Technol., in press.10.1016/j.powtec.2020.01.014 ↗
5. Recent Developments in Carbon Fibers and Carbon Nanotube-Based Fibers: A Review10.1080/15583724.2016.1169546 ↗
6. Non-covalent polymer wrapping of carbon nanotubes and the role of wrapped polymers as functional dispersants10.1088/1468-6996/16/2/024802 ↗
7. Small but strong: A review of the mechanical properties of carbon nanotube-polymer composites10.1016/j.carbon.2006.02.038 ↗
8. Surface functionalization of carbon nanotubes: Fabrication and applications10.1039/C6RA24522F ↗
9. Structural and elastic properties and stability characteristics of oxygenated carbon nanotubes under physical adsorption of polymers10.1016/j.apsusc.2015.01.190 ↗
10. Extreme oxygen sensitivity of electronic properties of carbon nanotubes10.1126/science.287.5459.1801 ↗
11. Elastic and structural properties and buckling behavior of single-walled carbon nanotubes under chemical adsorption of atomic oxygen and hydroxyl10.1016/j.cplett.2014.10.036 ↗
12. Mechanical properties of graphene oxide: A molecular dynamics study10.1080/1536383X.2016.1208180 ↗
13. Stress transfer in nanocomposites enabled by poly(methyl methacrylate) wrapping of carbon nanotubes10.1016/j.polymer.2017.10.002 ↗
14. Nanotube dispersion and polymer conformational confinement in a nanocomposite fiber: A joint computational experimental study10.1021/jp504726w ↗
15. Molecular engineering of interphases in polymer/carbon nanotube composites to reach the limits of mechanical performance10.1016/j.compscitech.2018.04.013 ↗
16. Stretchable, porous, and conductive energy textiles10.1021/nl903949m ↗
17. Flexible and Pressure-Responsive Sensors from Cellulose Fibers Coated with Multiwalled Carbon Nanotubes10.1021/acsaelm.9b00182 ↗
18. Cellulose-Nanofiber-Enabled 3D Printing of a Carbon-Nanotube Microfiber Network10.1002/smtd.201700222 ↗
19. Graphene/cellulose nanocomposite paper with high electrical and mechanical performances10.1039/c1jm12134k ↗
20. Highly Conductive, Light Weight, Robust, Corrosion-Resistant, Scalable, All-Fiber Based Current Collectors for Aqueous Acidic Batteries10.1002/aenm.201702615 ↗
21. Novel Carbon Nanotube/Cellulose Composite Fibers As Multifunctional Materials10.1021/acsami.5b06229 ↗
22. Simultaneous reinforcement and toughening of carbon nanotube/cellulose conductive nanocomposite films by interfacial hydrogen bonding10.1021/sc500681v ↗
23. Multifunctional Wet-Spun Filaments through Robust Nanocellulose Networks Wrapping to Single-Walled Carbon Nanotubes10.1021/acsami.9b15153 ↗
24. Cellulose nanomaterials review: Structure, properties and nanocomposites10.1039/c0cs00108b ↗
25. Nanocelluloses: A new family of nature-based materials10.1002/anie.201001273 ↗
26. Overview of Cellulose Nanomaterials, Their Capabilities and Applications10.1007/s11837-016-2018-7 ↗
27. Meng, Q., and Wang, T.J. (2019). Mechanics of Strong and Tough Cellulose Nanopaper. Appl. Mech. Rev., 71.10.1115/1.4044018 ↗
28. Elastic modulus of single cellulose microfibrils from tunicate measured by atomic force microscopy10.1021/bm900520n ↗
29. A continuum-based structural modeling approach for cellulose nanocrystals (CNCs)10.1016/j.jmps.2017.11.006 ↗
30. An ultrastrong nanofibrillar biomaterial: The strength of single cellulose nanofibrils revealed via sonication-induced fragmentation10.1021/bm301674e ↗
31. Effects of interface properties on the mechanical properties of bio-inspired cellulose nanocrystal (CNC)-based materials10.1016/j.jmps.2018.12.002 ↗
32. Anomalous scaling law of strength and toughness of cellulose nanopaper10.1073/pnas.1502870112 ↗
33. On the modeling of carbon nanotubes: A critical review10.1016/j.compositesb.2013.08.037 ↗
34. Tensile strength of Iβ crystalline cellulose predicted by molecular dynamics simulation10.1007/s10570-014-0325-0 ↗
35. Tian, K., Shishehbor, M., and Zavattieri, P.D. (2016, October 24). Coarse Graining of Crystalline Cellulose. Available online: https://nanohub.org/resources/cgmcc.
36. Leonardo, J., Shishehbor, M., and Zavattieri, P.D. (2017, August 08). Mechanics of Crystalline Nano Cellulose Nanofilm. Available online: https://nanohub.org/resources/cnc.
37. Ramezani, M.G., and Golchinfar, B. (2019). Mechanical Properties of Cellulose Nanocrystal (CNC) Bundles: Coarse-Grained Molecular Dynamic Simulation. J. Compos. Sci., 3.10.3390/jcs3020057 ↗
38. Molecular dynamics simulations of flexible polymer chains wrapping single-walled carbon nanotubes10.1021/jp908001d ↗
39. Interactions between polymers and carbon nanotubes: A molecular dynamics study10.1021/jp0442403 ↗
40. On the wrapping of poly(phenylacetylene), polystyrene sulfonate and polyvinyl pyrrolidone polymer chains around single-walled carbon nanotubes using molecular dynamics simulations10.1007/s12221-014-1123-x ↗
41. Recent developments concerning the dispersion of carbon nanotubes in surfactant/polymer systems by MD simulation10.1007/s40097-015-0175-9 ↗
42. Tam, L.H., and Wu, C. (2017). Molecular mechanics of the moisture effect on epoxy/carbon nanotube nanocomposites. Nanomaterials, 7.10.3390/nano7100324 ↗
43. Molecular dynamics simulations of orientation induced interfacial enhancement between single walled carbon nanotube and aromatic polymers chains10.1016/j.compositesa.2015.02.027 ↗
44. Duan, K., Li, L., Wang, F., Meng, W., Hu, Y., and Wang, X. (2019). Importance of Interface in the Coarse-Grained Model of CNT/Epoxy Nanocomposites. Nanomaterials, 9.10.3390/nano9101479 ↗
45. Prediction of cellulose nanotube models through density functional theory calculations10.1007/s10570-013-0125-y ↗
46. Molecular dynamics simulations of theoretical cellulose nanotube models10.1016/j.carbpol.2018.03.004 ↗
47. Designing nacre-like materials for simultaneous stiffness, strength and toughness: Optimum materials, composition, microstructure and size10.1016/j.jmps.2014.08.008 ↗
48. Impact-resistant nacre-like transparent materials10.1126/science.aaw8988 ↗
49. Crystal structure and hydrogen-bonding system in cellulose Iβ from synchrotron X-ray and neutron fiber diffraction10.1021/ja0257319 ↗
50. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
51. ReaxFF: A reactive force field for hydrocarbons10.1021/jp004368u ↗
52. Reactive Potentials for Advanced Atomistic Simulations10.1146/annurev-matsci-071312-121610 ↗
53. Molecular investigations on the interactions of graphene, crude oil fractions and mineral aggregates at low, medium and high temperatures10.1080/10916466.2019.1566254 ↗
54. Ramezani, M.G., and Rickgauer, J. (2019). Understanding the adhesion properties of carbon nanotube, asphalt binder, and mineral aggregates at the nanoscale: A molecular dynamics study. Pet. Sci. Technol., 38.10.1080/10916466.2019.1655446 ↗
55. Evaluating the adhesion properties of crude oil fractions on mineral aggregates at different temperatures through reactive molecular dynamics10.1080/10916466.2018.1531032 ↗
56. First-principles and classical molecular dynamics simulation of shocked polymers10.1103/PhysRevB.81.054103 ↗
57. A second-generation reactive empirical bond order (REBO) potential energy expression for hydrocarbons10.1088/0953-8984/14/4/312 ↗
58. AIREBO-M: A reactive model for hydrocarbons at extreme pressures10.1063/1.4905549 ↗
59. ReaxFF reactive force field for molecular dynamics simulations of hydrocarbon oxidation10.1021/jp709896w ↗
60. Development of a ReaxFF reactive force field for glycine and application to solvent effect and tautomerization10.1021/jp108642r ↗
61. Shock Waves in High-Energy Materials: The Initial Chemical Events in Nitramine RDX10.1103/PhysRevLett.91.098301 ↗
62. Brittle and ductile behavior in carbon nanotubes10.1103/PhysRevLett.81.4656 ↗
63. Stiffness predictions for unidirectional short-fiber composites: Review and evaluation10.1016/S0266-3538(98)00120-1 ↗
64. Effective enhancement of the mechanical properties of macroscopic single-walled carbon nanotube fibers by pressure treatment10.1039/C6RA21238G ↗
65. Nanomechanics of carbon tubes: Instabilities beyond linear response10.1103/PhysRevLett.76.2511 ↗
66. Buckling of multiwalled carbon nanotubes under axial compression10.1103/PhysRevB.73.085410 ↗
67. Buckling of carbon nanotubes: A state of the art review10.3390/ma5010047 ↗
68. Binding energy of parallel carbon nanotubes10.1063/1.1623013 ↗
69. Traction-separation laws and stick-slip shear phenomenon of interfaces between cellulose nanocrystals10.1016/j.jmps.2015.02.012 ↗
70. Tough composites inspired by mineralized natural materials: Computation, 3D printing, and testing10.1002/adfm.201300215 ↗
71. Optimal length scales emerging from shear load transfer in natural materials: Application to carbon-based nanocomposite design10.1021/nn204506d ↗
72. Critical length scales and strain localization govern the mechanical performance of multi-layer graphene assemblies10.1039/C5NR08488A ↗