Morphological and Electrochemical Properties of ZnMn2O4 Nanopowders and Their Aggregated Microspheres Prepared by Simple Spray Drying Process
Source abstract
Abstract
Phase-pure ZnMn2O4 nanopowders and their aggregated microsphere powders for use as anode material in lithium-ion batteries were obtained by a simple spray drying process using zinc and manganese salts as precursors, followed by citric acid post-annealing at different temperatures. X-ray diffraction (XRD) analysis indicated that phase-pure ZnMn2O4 powders were obtained even at a low post-annealing temperature of 400 °C. The post-annealed powders were transformed into nanopowders by simple milling process, using agate mortar. The mean particle sizes of the ZnMn2O4 powders post-treated at 600 and 800 °C were found to be 43 and 85 nm, respectively, as determined by TEM observation. To provide practical utilization, the nanopowders were transformed into aggregated microspheres consisting of ZnMn2O4 nanoparticles by a second spray drying process. Based on the systematic analysis, the optimum post-annealing temperature required to obtain ZnMn2O4 nanopowders with high capacity and good cycle performance was found to be 800 °C. Moreover, aggregated ZnMn2O4 microsphere showed improved cycle stability. The discharge capacities of the aggregated microsphere consisting of ZnMn2O4 nanoparticles post-treated at 800 °C were 1235, 821, and 687 mA h g−1 for the 1st, 2nd, and 100th cycles at a high current density of 2.0 A g−1, respectively. The capacity retention measured after the second cycle was 84%.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Transition Metal Oxide Nanomaterials · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Advanced Materials Engineering, Chungbuk National University, Cheongju 361-763, Korea
Department of Materials Science and Engineering, Korea University, Anam-Dong, Seongbuk-Gu, Seoul 136-713, Korea
Department of Engineering Chemistry, Chungbuk National University, Cheongju 361-763, Korea
References (39)
Show source-provided references
1. Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries10.1038/35035045 ↗
2. Hollow micro-/nanostructures: Synthesis and applications10.1002/adma.200800854 ↗
3. Metal oxide hollow nanostructures for lithium-ion batteries10.1002/adma.201200469 ↗
4. Hollow nanostructured anode materials for Li-ion batteries10.1007/s11671-010-9728-5 ↗
5. Nanoparticulate iron oxide tubes from microporous organic nanotubes as stable anode materials for lithium-ion batteries10.1002/anie.201202244 ↗
6. Graphene anchored with Co3O4 nanoparticles as anode of lithium-ion batteries with enhanced reversible capacity and cyclic performance10.1021/nn100740x ↗
7. Hierarchical NiO hollow microspheres: Electrochemical and magnetic properties10.1039/c2ra20910a ↗
8. Molten salt synthesis and energy storage studies on CuCo2O4 and CuO·Co3O410.1039/c2ra21033a ↗
9. Hollow CoFe2O4 nanospheres as a high capacity anode material for lithium-ion batteries10.1088/0957-4484/23/5/055402 ↗
10. Hierarchical three-dimensional ZnCo2O4 nanowire arrays/carbon cloth anodes for a novel class of high-performance flexible lithium-ion batteries10.1021/nl300794f ↗
11. Electrochemical performance and ex situ analysis of ZnMn2O4 nanowires as anode materials for lithium rechargeable batteries10.1007/s12274-011-0106-0 ↗
12. Critical size of a nano SnO2 electrode for Li-secondary battery10.1021/cm048003o ↗
13. Morphology-controlled synthesis of SnO2 nanotubes by using 1D silica mesostructures as sacrificial templates and their applications in lithium-ion batteries10.1002/smll.200901815 ↗
14. High capacity anode materials for Li-ion batteries based on spinel metal oxides AMn2O4 (A = Co, Ni, and Zn)10.1039/c0jm04465b ↗
15. ZnMn2O4 nanoparticles synthesized by a hydrothermal method as an anode material for Li-ion batteries10.1016/j.electacta.2012.03.108 ↗
16. Mesoporous ZnMn2O4 microtubules derived from a biomorphic strategy for high-performance lithium/sodium ion batteries10.1021/acsami.8b10111 ↗
17. Low temperature synthesis of flower-like ZnMn2O4 superstructures with enhanced electrochemical lithium storage10.1016/j.jpowsour.2009.06.043 ↗
18. Controllable synthesis of spinel nano-ZnMn2O4 via a single source precursor route and its high capacity retention as anode material for lithium ion batteries10.1039/c1jm11575h ↗
19. Facile preparation of ZnMn2O4 hollow microspheres as high-capacity anodes for lithium-ion batteries10.1039/C1JM15054E ↗
20. Mechanochemical synthesis of ZnMn2O4 and its electrochemical properties as an anode material for lithium-ion batteries10.5012/bkcs.2011.32.9.3333 ↗
21. Characteristics of ZnMn2O4 nanopowders prepared by flame spray pyrolysis for use as anode material in lithium-ion batteries10.1016/S1452-3981(23)14761-4 ↗
22. Spray-drying synthesis and electrochemical performance of lithium vanadates as positive electrode materials for lithium batteries10.1149/1.2884859 ↗
23. Spray drying method for large-scale and high-performance silicon negative electrodes in Li-ion batteries10.1021/nl400437f ↗
24. Electrochemical properties of C-coated Cu6Sn5 nanoparticles dispersed on carbon matrix prepared by spray drying process10.1016/S1452-3981(23)14081-8 ↗
25. High-rate LiNi0.815Co0.15Al0.035O2 cathode material prepared by spray drying method for Li-ion batteries10.1007/s10854-019-02627-9 ↗
26. Scalable synthesis of microsized, nanocrystalline Zn0.9Fe0.1O-C secondary particles and their use in Zn0.9Fe0.1O-C/LiNi0.5Mn1.5O4 lithium-ion full cells10.1002/cssc.202000559 ↗
27. A hierarchical dual-carbon supported ZnMn2O4/C composite as an anode material for Li-ion batteries10.1016/j.jallcom.2021.160242 ↗
28. Formation of ZnMn2O4 ball-in-ball hollow microspheres as a high-performance anode for lithium-ion batteries10.1002/adma.201201779 ↗
29. Solvothermal synthesis of ZnMn2O4 as an anode material in lithium ion battery10.1016/j.electacta.2014.05.126 ↗
30. Synthesis and electrochemical properties of ZnMn2O4 microspheres for lithium-ion battery application10.1016/j.jallcom.2016.07.304 ↗
31. Islam, M., Ali, G., Akbar, M., Ali, B., Jeong, M.-G., Kim, J.-Y., Chung, K.Y., Nam, K.-W., and Jung, H.-G. (2021). Investigating the energy storage performance of the ZnMn2O4 anode for its potential application in lithium-ion batteries. Int. J. Energy Res.
32. Microemulsion synthesis of ZnMn2O4/Mn3O4 sub-microrods for Li-ion batteries and their conversion reaction mechanism10.1016/S1003-6326(21)65493-6 ↗
33. Superior electrochemical properties of composite microspheres consisting of hollow Fe2O3 nanospheres and graphitic carbon10.1021/acssuschemeng.8b02003 ↗
34. Design and synthesis of interconnected hierarchically porous anatase titanium dioxide nanofibers as high-rate and long-cycle-life anodes for lithium-ion batteries10.1039/C8NR01666F ↗
35. Design and synthesis of spherical multicomponent aggregates composed of core–shell, yolk–shell, and hollow nanospheres and their lithium-ion storage performances10.1002/smll.201703957 ↗
36. Porous ZnMn2O4 microspheres as a promising anode material for advanced lithium-ion batteries10.1016/j.nanoen.2014.04.001 ↗
37. Hierarchical Porous ZnMn2O4Hollow Nanotubes with Enhanced Lithium Storage toward Lithium-Ion Batteries10.1002/chem.201501421 ↗
38. Porous ZnMn2O4 nanospheres: Facile synthesis through microemulsion method and excellent performance as anode of lithium ion battery10.1016/j.jpowsour.2016.02.056 ↗
39. Porous ZnMn2O4 nanowires as an advanced anode material for lithium ion battery10.1016/j.electacta.2015.10.032 ↗