journal article·2024-07-04Open access

Effect of Co-Sputtered Copper and Titanium Oxide Coatings on Bacterial Resistance and Cytocompatibility of Osteoblast Cells

Maria P. Nikolova, Iliyan Tzvetkov, Tanya V. Dimitrova, Veronika L. Ivanova, Yordan Handzhiyski, Andreana Andreeva, Stefan Valkov, Maria Ormanova, Margarita D. Apostolova

Nanomaterials· Volume 14· Issue 13

Abstract

One of the primary risk factors for implant failure is thought to be implant-related infections during the early healing phase. Developing coatings with cell stimulatory behaviour and bacterial adhesion control is still difficult for bone implants. This study proposes an approach for one-step deposition of biocompatible and antimicrobial Cu-doped TiO2 coatings via glow-discharge sputtering of a mosaic target. During the deposition, the bias of the Ti6Al4V substrates was changed. Structure examination, phase analysis, and surface morphology were carried out using X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS). The hardness values and hydrophilic and corrosion performance were also evaluated together with cytocompatible and antibacterial examinations against E. coli and S. aureus. The results show great chemical and phase control of the bias identifying rutile, anatase, CuO, or ternary oxide phases. It was found that by increasing the substrate bias from 0 to −50 V the Cu content increased from 15.3 up to 20.7 at% while at a high bias of −100 V, the copper content reduced to 3 at%. Simultaneously, apart from the Cu2+ state, Cu1+ is also found in the biased samples. Compared with the bare alloy, the hardness, the water contact angle and corrosion resistance of the biased coatings increased. According to an assessment of in vitro cytocompatibility, all coatings were found to be nontoxic to MG-63 osteoblast cells over the time studied. Copper release and cell-surface interactions generated an antibacterial effect against E. coli and S. aureus strains. The −50 V biased coating combined the most successful results in inhibiting bacterial growth and eliciting the proper responses from osteoblastic cells because of its phase composition, electrochemical stability, hydrophilicity, improved substrate adhesion, and surface roughness. Using this novel surface modification approach, we achieved multifunctionality through controlled copper content and oxide phase composition in the sputtered films.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Nanoparticles: synthesis and applications · Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Material Science and Technology, University of Ruse “Angel Kanchev”, 8 Studentska Str., 7017 Ruse, Bulgaria

Roumen Tsanev Institute of Molecular Biology, Bulgarian Academy of Sciences, Acad. G. Bonchev Str., Bl. 21, 1113 Sofia, Bulgaria

Faculty of Physics, Sofia University “St. Kliment Ohridski”, 15 Tsar Osvoboditel Blvd, 1504 Sofia, Bulgaria

Institute of Electronics “Acad. Emil Djakov”, Bulgarian Academy of Sciences, 72 Tzarigradsko Chaussee, 1784 Sofia, Bulgaria

Department of Mathematics, Informatics and Natural Sciences, Technical University of Garbovo, 4 H. Dimitar Str., 5300 Gabrovo, Bulgaria

Funding

Bulgarian National Science Fund

References (87)

Show source-provided references
1. Marin, E., and Lanzutti, A. (2024). Biomedical Applications of Titanium Alloys: A Comprehensive Review. Materials, 17.10.3390/ma17010114 ↗
2. Cu and Si co-doped microporous TiO2 coating for osseointegration by the coordinated stimulus action10.1016/j.apsusc.2019.144072 ↗
3. In Vitro Biofilm Formation on Titanium and Zirconia Implant Surfaces10.1902/jop.2016.160245 ↗
4. Antimicrobial TiO2 nanocomposite coatings for surfaces, dental and orthopaedic implants10.1016/j.cej.2021.129071 ↗
5. Targeting implant-associated infections: Titanium surface loaded with antimicrobiaI10.1016/j.isci.2020.102008 ↗
6. Toward a molecular understanding of the antibacterial mechanism of copper-bearing titanium alloys against Staphylococcus aureus10.1002/adhm.201500712 ↗
7. The significance of infection related to orthopedic devices and issues of antibiotic resistance10.1016/j.biomaterials.2005.11.044 ↗
8. Scenery of Staphylococcus implant infections in orthopedics10.2217/fmb.11.117 ↗
9. Physical properties of homogeneous TiO2 films prepared by high power impulse magnetron sputtering as a function of crystallographic phase and nanostructure10.1088/0022-3727/42/10/105204 ↗
10. Antibacterial Potential of Zn- and Cu-Substituted Hydroxyapatite-Based Coatings Deposited by RF-Magnetron Sputtering10.1088/1742-6596/1393/1/012118 ↗
11. Cellular Behaviour of Bone Marrow Stromal Cells on Modified Ti-Nb Surfaces10.1016/j.matdes.2017.12.006 ↗
12. Deposition of thin titanium–copper films with antimicrobial effect by advanced magnetron sputtering methods10.1016/j.msec.2011.06.009 ↗
13. Evaluation of TiO2 coatings obtained using the sol–gel technique on surgical grade type 316L stainless steel in simulated body fluid10.1016/j.matlet.2005.05.036 ↗
14. Superamphiphilic TiO2 Composite Surface for Protein Antifouling10.1002/adma.202003559 ↗
15. Properties of TiO2 thin films deposited by RF magnetron sputtering
16. Nikolova, M.P., Ormanova, M., Nikolova, V., and Apostolova, M.D. (2021). Electrochemical, Tribological and Biocompatible Performance of Electron Beam Modified and Coated Ti6Al4V Alloy. Int. J. Mol. Sci., 22.10.3390/ijms22126369 ↗
17. Self-defending additively manufactured bone implants bearing silver and copper nanoparticles10.1039/C9TB02434D ↗
18. Wu, Y., Zhou, H., Zeng, Y., Xie, H., Ma, D., Wang, Z., and Liang, H. (2022). Recent Advances in Copper-Doped Titanium Implants. Materials, 15.10.3390/ma15072342 ↗
19. Wen, C. (2017). Antibacterial design for metal implants. Metallic Foam Bone, Elsevier Inc.
20. The roles of ions on bone regeneration10.1016/j.drudis.2018.01.049 ↗
21. Preliminary focus on the mechanical and antibacterial activity of a PMMA-based bone cement loaded with gold nanoparticles
22. Russo, T., De Santis, R., Gloria, A., Barbaro, K., Altigeri, A., Fadeeva, I.V., and Rau, J.V. (2020). Modification of PMMA Cements for Cranioplasty with Bioactive Glass and Copper Doped Tricalcium Phosphate Particles. Polymers, 12.10.3390/polym12010037 ↗
23. Evaluation of borate bioactive glass scaffolds as a controlled delivery system for copper ions in stimulating osteogenesis and angiogenesis in bone healing10.1039/C4TB01355G ↗
24. Copper-doped 3D porous coating developed on ti-6Al-4V alloys and its in vitro long-term antibacterial ability10.1016/j.apsusc.2019.144717 ↗
25. Outstanding Antibiofilm Features of Quanta-CuO Film on Glass Surface10.1021/acsami.6b04494 ↗
26. Copper-containing mesoporous bioactive glass nanoparticles as multifunctional agent for bone regeneration10.1016/j.actbio.2017.04.012 ↗
27. Bactericidal activity of Cu-, Zn-, and Ag-containing zeolites toward Escherichia coli isolates10.1007/s11356-017-9643-8 ↗
28. Role of copper oxides in contact killing of bacteria10.1021/la404091z ↗
29. Synergy effects of copper and silicon ions on stimulation of vascularization by copper-doped calcium silicate10.1039/C3TB21529F ↗
30. The Cu-containing TiO2 coatings with modulatory effects on macrophage polarization and bactericidal capacity prepared by micro-arc oxidation on titanium substrates10.1016/j.colsurfb.2018.06.020 ↗
31. The dual function of Cu-doped TiO2 coatings on titanium for application in percutaneous implants10.1039/C6TB00563B ↗
32. Effects of copper nanoparticles in porous TiO2 coatings on bacterial resistance and cytocompatibility of osteoblasts and endothelial cells. Outstanding Antibiofilm Features of Quanta-CuO Film on Glass Surface10.1016/j.msec.2017.08.061 ↗
33. Biological activity and antibacterial property of Nano-structured TiO2 coating incorporated with cu prepared by micro-arc oxidation10.1016/j.jmst.2012.12.015 ↗
34. Fibroblast responses and antibacterial activity of Cu and Zn co-doped TiO2 for percutaneous implants10.1016/j.apsusc.2017.10.169 ↗
35. Superior antibacterial properties of copper-doped titanium oxide films prepared by micro-arc oxidation10.1016/j.ceramint.2023.10.225 ↗
36. Biocompatibility, corrosion resistance and antibacterial activity of TiO2/CuO coating on titanium10.1016/j.ceramint.2017.08.196 ↗
37. Nanostructured Cu-doped TiO2 with photothermal effect for prevention of implant-associated infection10.1016/j.colsurfb.2022.112695 ↗
38. Co-sputtered CuO/TiO2 coatings with varying copper content deposited on Ti6Al4V alloy10.1088/1742-6596/2710/1/012021 ↗
39. High-Resolution X-Ray Photoemission Spectrum of the Valence Bands of Gold10.1103/PhysRevB.5.4709 ↗
40. Hartree-Slater subshell photo-ionisation cross-sections at 1254 and 1487 eV10.1016/0368-2048(76)80015-1 ↗
41. Solutions able to reproduce in vivo surface-structure changes in bioactive glass-ceramic A-W10.1002/jbm.820240607 ↗
42. Rapid colorimetric assay for cellular growth and survival: Application to proliferation and cytotoxicity assays10.1016/0022-1759(83)90303-4 ↗
43. Diffusion barrier properties of sputtered TaNx between Cu and Si using TaN as the target10.1016/S0254-0584(03)00106-8 ↗
44. TiO2 nanotubes with ultrathin walls for enhanced water splitting10.1039/C5CC04539H ↗
45. Demonstration of synaptic and resistive switching characteristics in W/TiO2/HfO2/TaN memristor crossbar array for bioinspired neuromorphic computing10.1016/j.jmst.2021.04.025 ↗
46. Bipolar Resistive Switching Characteristics of HfO2/TiO2/HfO2 Trilayer-Structure RRAM Devices on Pt and TiN-Coated Substrates Fabricated by Atomic Layer Deposition10.1186/s11671-017-2164-z ↗
47. Surface Oxidation and Reduction of CuO and Cu2O Studied Using XPS and XAES10.1002/(SICI)1096-9918(199611)24:12<811::AID-SIA191>3.0.CO;2-Z ↗
48. Determination of the Cu 2p primary excitation spectra for Cu, Cu2O and CuO10.1016/j.susc.2013.10.009 ↗
49. Wagner, C.D., Naumkin, A.V., Kraut-Vass, A., Allison, J.W., Powell, C.J., and Rumble, J.R.J. (2024, June 06). NIST Standard Reference Database 20 Version 3.4, Available online: http://srdata.nist.gov/xps/.
50. XPS and XAES studies of transient enhancement of Cu1 at CuO surfaces during vacuum outgassing10.1016/0378-5963(83)90085-5 ↗
51. Engineering the Nucleophilic Active Oxygen Species in CuTiOx for Efficient Low-Temperature Propene Combustion10.1021/acs.est.0c05845 ↗
52. A copper nickel mixed oxide hole selective layer for Au-free transparent cuprous oxide photocathodes10.1039/C6EE03613A ↗
53. The advanced removal of benzene from aerosols by photocatalytic oxidation and adsorption of Cu-TiO2/PU under visible light irradiation10.1016/j.apcatb.2015.09.023 ↗
54. Low-temperature removal of toluene and propanal over highly active mesoporous CuCeOx catalysts synthesized via a simple self-precipitation protocol10.1016/j.apcatb.2013.08.039 ↗
55. Ion Sputtering Yield Measurements for Submicrometer Thin Film10.1116/1.575188 ↗
56. Seshan, K. (2012). Handbook of Thin Film Deposition, Elsevier Inc.. [3rd ed.].
57. Effect of substrate bias and oxygen partial pressure on properties of RF magnetron sputtered HfO2 thin films
58. Understanding Polymorphic Phase Transformation Behavior during Growth of Nanocrystalline Aggregates: Insights from TiO210.1021/jp000499j ↗
59. Titanium oxide thin film growth by magnetron sputtering: Total energy flux and its relationship with the phase constitution10.1016/j.surfcoat.2014.06.037 ↗
60. Controlled formation of anatase and rutile TiO2 thin films by reactive magnetron sputtering10.1063/1.4931925 ↗
61. Growth and optical properties of rectangular hollow tube TiO2 crystals with rutile-type structure10.1021/cg2005985 ↗
62. Recent advances of titanium dioxide (TiO2) for green organic synthesis10.1039/C6RA22894A ↗
63. DLI-CVD of TiO2–Cu antibacterial thin films: Growth and characterization10.1016/j.surfcoat.2009.07.015 ↗
64. Microstructures and mechanical properties of chromium oxide films by arc ion plating10.1016/j.matlet.2003.12.029 ↗
65. Comparative study on the influence of Cu and Ag on the crystallographic structure and surface topography of TiN/Ag and TiN/Cu nanocomposite coating using reactive magnetron sputtering
66. Mathew, S., Ganguly, P., Rhatigan, S., Kumaravel, V., Byrne, C., Hinder, S.J., Bartlett, J., Nolan, M., and Pillaim, S.C. (2018). Cu-Doped TiO2: Visible Light Assisted Photocatalytic Antimicrobial Activity. Appl. Sci., 8.10.26434/chemrxiv.7159733 ↗
67. Effect of Cu doping on the anatase-to-rutile phase transition in TiO2 photocatalysts: Theory and experiments10.1016/j.apcatb.2019.01.058 ↗
68. Correlation between full width at half maximum (FWHM) of XRD peak with residual stress on ground surfaces10.1080/14786435.2012.704429 ↗
69. Metastability and Photoelectrochemical Properties of Cu2SnO3 and Cu2–xLixTiO3: Two Cu(I)-Based Oxides with Delafossite Structures10.1021/acs.chemmater.2c03563 ↗
70. Evolution of hydrophobicity in plasma polymerized 1,7-octadiene films10.1002/ppap.201300055 ↗
71. Implant surface roughness and patient factors on long-term peri-implant bone loss
72. Combinatorial surface roughness effects on osteoclastogenesis and osteogenesis10.1021/acsami.8b10992 ↗
73. Hardness of Nanocrystalline TiO2 Thin Films10.4028/www.scientific.net/JNanoR.18-19.195 ↗
74. Mechanical Properties of Cu2O Thin Films by Nanoindentation10.3390/ma6104505 ↗
75. Controlled (110) and (101) crystallographic plane growth of single crystalline rutile TiO2 nanorods by facile low cost chemical methods
76. Radiation-Free Superhydrophilic and Antifogging Properties of E-Beam Evaporated TiO2 Films on Glass10.1016/j.apsusc.2017.05.077 ↗
77. The effect of metal ions in solution on bacterial growth compared with wear particles from hip replacements10.1302/0301-620X.89B12.19714 ↗
78. Comparison of the tribological and antimicrobial properties of CrN/Ag, ZrN/Ag, TiN/Ag, and TiN/Cu nanocomposite coatings10.1016/j.surfcoat.2010.07.029 ↗
79. Zhang, X.F., Liu, Z.G., Shen, W., and Gurunathan, S. (2016). Silver nanoparticles: Synthesis, characterization, properties, applications, and therapeutic approaches. Int. J. Mol. Sci., 17.10.3390/ijms17091534 ↗
80. Lakha, R., Hachicho, C., Mehlenbacher, M.R., Wilcox, D.E., Austin, R.N., and Vizcarra, C.L. (2023). Metallothionein-3 attenuates the effect of Cu2+ ions on actin filaments. J. Inorg. Biochem., 242.10.1016/j.jinorgbio.2023.112157 ↗
81. Metallothionein is crucial for safe intracellular copper storage and cell survival at normal and supra-physiological exposure levels10.1042/bj20031174 ↗
82. A dual function of copper in designing regenerative implants10.1016/j.biomaterials.2014.12.022 ↗
83. CuO nanoparticle interaction with human epithelial cells: Cellular uptake, location, export, and genotoxicity10.1021/tx3002093 ↗
84. Early stages of antibacterial damage of metallic nanoparticles by TEM and STEM-HAADF10.2174/2468187307666170906150731 ↗
85. Biosynthesis and wound healing activity of copper nanoparticles10.1049/iet-nbt.2013.0052 ↗
86. Mechanism of copper surface toxicity in Escherichia coli O157:H7 and Salmonella involves immediate membrane depolarization followed by slower rate of DNA destruction which differs from that observed for Gram-positive bacteria10.1111/j.1462-2920.2011.02677.x ↗
87. Membrane lipid peroxidation in copper alloy-mediated contact killing of Escherichia coli10.1128/AEM.07068-11 ↗