Preparation of Triple-Functionalized Montmorillonite Layers Promoting Thermal Stability of Polystyrene
Source abstract
Abstract
The objective of this study was to investigate the effect of three different treatments on the morphology, microstructure, and the thermal characteristics of a montmorillonite (Mt) sample, by using hydrochloric acid (HCl), tributyl tetradecyl phosphonium chloride (TTPC) surfactant, and γ-methacryloxypropyltrimethoxysilane (γ-MPS). The resultant nanofillers were characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM), nitrogen adsorption–desorption analysis, X-ray fluorescence spectrometry (XRF), and thermogravimetric analysis (TGA). The results showed that the amount of chemical grafting of the γ-MPS was increased after the acid treatment, whereas the amount of intercalation of the TTPC surfactant was decreased. The preintercalation of TTPC or silylation of γ-MPS, for the Mt sample, had a certain hindrance effect on its subsequent silylation or intercalation treatments. Furthermore, the effect of four different nanofillers on the thermal stability properties of the polystyrene (PS) matrix were also investigated. The results showed an increase in thermal stability for the triple-functionalized Mt, compared with the double-functionalized samples. The onset decomposition temperatures and the maximum mass loss temperatures of the PS nanocomposites were increased by 27 °C and 32 °C, respectively, by the incorporation of triple-modified Mt, as a result of the good exfoliation and dispersion of the nanolayers, more favorable polymer–nanofiller interaction, as well as the formation of a more remarkable tortuous pathway in the continuous matrix.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · biodegradable polymer synthesis and properties · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Tribology, Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China
CNPC Nanochemistry Key Laboratory, College of Science, China University of Petroleum, Beijing 102249, China
References (59)
Show source-provided references
1. Stiff and tough PDMS-MMT layered nanocomposites visualized by AIE luminogens10.1038/s41467-021-24835-w ↗
2. Layered nanocomposites by shear-flow-induced alignment of nanosheets10.1038/s41586-020-2161-8 ↗
3. Wu, S., Chen, X., Yi, M., Ge, J., Yin, G., Li, X., and He, M. (2019). Improving Thermal, Mechanical, and Barrier Properties of Feather Keratin/Polyvinyl Alcohol/Tris(hydroxymethyl)aminomethane Nanocomposite Films by Incorporating Sodium Montmorillonite and TiO2. Nanomatreials, 9.10.3390/nano9020298 ↗
4. Scalable synthesis of multifunctional epidermis-like smart coatings10.1002/adfm.201903984 ↗
5. Exfoliation of montmorillonite and related properties of clay/polymer nanocomposites10.1016/j.clay.2018.12.006 ↗
6. Novel multi amine-containing Gemini surfactant modified montmorillonite as adsorbents for removal of phenols10.1016/j.clay.2018.06.023 ↗
7. Tamoxifen/montmorillonite system-Effect of the experimental conditions10.1016/j.clay.2019.105142 ↗
8. Comparison of the properties of clay polymer nanocomposites prepared by montmorillonite modified by silane and by quaternary ammonium salts10.1016/j.clay.2013.09.004 ↗
9. A new method combining modification of montmorillonite and crystal regulation to enhance the mechanical properties of polypropylene10.1016/j.polymertesting.2019.106236 ↗
10. Recent trends and future outlooks in the field of clay-containing polymer nanocomposites10.1002/macp.201400069 ↗
11. Comparison of the reinforcing effect of various micro- and nanofillers in PA610.1016/j.polymertesting.2018.10.011 ↗
12. Effects of variables on the dispersion of cationic-anionic organomontmorillonites and characteristics of Pickering emulsion10.1039/C5RA27265C ↗
13. Organoclays prepared from montmorillonites with tetramethylolphosphonium chloride in different pH conditions10.1016/j.powtec.2013.07.014 ↗
14. Enhanced removal of bisphenol A from aqueous solution by organo-montmorillonites modified with novel gemini pyridinium surfactants containing long alkyl chain10.1016/j.cej.2015.09.114 ↗
15. Thermally stable phosphonium-montmoril- lonite organoclays10.1016/j.clay.2007.08.004 ↗
16. Characterization of surface-modified montmorillonite nanocomposites10.1016/j.ceramint.2011.08.012 ↗
17. Modification of montmorillonites with thermally stable phosphonium cations and comparison with alkylammonium montmorillonites10.1016/j.clay.2011.11.029 ↗
18. Effect of CEC coverage of hexadecyltributylphosphonium modified montmorillonite on polymer compatibility10.1016/j.clay.2017.02.036 ↗
19. Exfoliation properties of acid-activated montmorillonites and their resulting organoclays10.1021/la802533y ↗
20. Acid-activated montmorillonites as heterogeneous catalysts for the esterification of lauric acid acid with methanol10.1016/j.clay.2013.04.009 ↗
21. Influence of aminosilane coupling agent on aromatic polyamide/intercalated clay nanocomposites10.1021/ie400463z ↗
22. Silane functionalization of sodium montmorillonite nanoclay: The effect of dispersing media on intercalation and chemical grafting10.1016/j.clay.2017.12.020 ↗
23. Preparation and characterization of montmorillonite modified with 3-aminopropyltriethoxysilane10.1016/j.clay.2013.11.020 ↗
24. Characterization of silylated modified clay nanoparticles and its functionality in PMMA10.1016/j.compositesb.2016.10.084 ↗
25. Yu, C., Ke, Y., Hu, X., Zhao, Y., Deng, Q., and Lu, S. (2019). Effect of bifunctional montmorillonite on the thermal and tribological properties of polystyrene/montmorillonite nanocomposites. Polymers, 11.10.3390/polym11050834 ↗
26. Modification of bentonite by combination of reactions of acid-activation, silylation and ionic exchange10.1016/j.clay.2014.07.002 ↗
27. A novel, low surface charge density, anionically modified montmorillonite for polymer nanocomposites10.1039/C6RA27562A ↗
28. Effects of highly exfoliated montmorillonite layers on the properties of clay reinforced terpolymer nanocomposite plugging microspheres10.1002/app.44894 ↗
29. Role of epoxy groups on clay surface in the improvement of morphology of poly(L-lactide)/clay composites10.1021/ma0488515 ↗
30. Parametric studies on the grafting of poly (methyl methacrylate) onto organophilic montmorillonite using silylated clay platelets10.1080/00222348.2013.874313 ↗
31. Modification of reduced-charge montmorillonites by a series of Gemini surfactants: Characterization and application in methyl orange removal10.1016/j.apsusc.2014.11.043 ↗
32. Surface functional imprinting of bensulfuron-methyl at surface of silica nanoparticles linked by silane coupling agent10.1007/s10904-009-9253-0 ↗
33. Modification of montmorillonite by Gemini surfactants with different chain lengths and its adsorption behavior for methyl orange10.1016/j.clay.2017.10.024 ↗
34. Sodium montmorillonite modified with methacryloxy and vinylsilanes: Influence of silylation on the morphology of clay/unsaturated polyester nanocomposites10.1016/j.clay.2015.07.003 ↗
35. Chemically modified kaolinite nanolayers for the removal of organic pollutants10.1016/j.clay.2018.03.009 ↗
36. Synergistic effect of organoclay fillers based on fluorinated surfmers for preparation of polystyrene nanocomposites10.1002/app.42347 ↗
37. Preparation and Characterization of Poly (methyl methacrylate)/Reactive Montmorillonit Nanocomposites10.1002/pc.23421 ↗
38. Traditional and new applications for kaolin smectite, and palygorskite: A general overview10.1016/S0169-1317(00)00016-8 ↗
39. Characterization of anion–cationic surfactants modified montmorillonite and its application for the removal of methyl orange10.1016/j.cej.2011.05.013 ↗
40. Characterization of montmorillonites modified with organic divalent phosphonium cations10.1016/j.clay.2015.03.022 ↗
41. Silylation of montmorillonite surfaces: Dependence on solvent nature10.1016/j.jcis.2012.08.077 ↗
42. Thermal stability of quaternary phosphonium modified montmorillonites10.1021/cm020705v ↗
43. The influence of alkyl chain length on surfactant distribution within organo-montmorillonites and their thermal stability10.1007/s10973-011-1761-9 ↗
44. Nanostructure and dynamic mechanical properties of silane-functionalized montmorillonite/epoxy nanocomposites10.1016/j.clay.2011.08.002 ↗
45. Grafting of montmorillonite with different functional silanes via two different reaction systems10.1016/j.jcis.2007.04.029 ↗
46. Locking effect: A novel insight in the silylation of montmorillonite surfaces10.1016/j.matchemphys.2012.07.010 ↗
47. Impact of fullerenes on the thermal stability of melt processed polystyrene and poly(methyl methacrylate) composites10.1016/j.polymertesting.2015.09.004 ↗
48. Melt processed polyethylene/fullerene nanocomposites with highly improved thermo-oxidative stability10.1016/j.polymertesting.2015.06.002 ↗
49. Polymer nanocomposites based on silylated-montmorillonite: A review10.1016/j.progpolymsci.2018.07.003 ↗
50. The thermal degradation of polystyrene nanocomposite10.1016/j.polymer.2005.01.098 ↗
51. Kinetic analysis of the thermal degradation of polystyreneemontmorillonite nanocomposite10.1016/j.polymdegradstab.2004.01.006 ↗
52. Properties and thermal degradation kinetics of polystyrene/organoclay nanocomposites synthesized by solvent blending method: Effect of processing conditions and organoclay loading10.1002/app.33179 ↗
53. Synthesis and dielectric properties of polystyrene–clay nanocomposite materials10.1002/app.13360 ↗
54. Synthesis and properties of polystyrene–clay nanocomposites via in situ intercalative polymerization10.1002/app.21747 ↗
55. Preparation and characterization of surfactant-free polystyrene/layered double hydroxide exfoliated nanocomposite via soap-free emulsion polymerization10.1016/j.jcis.2006.05.049 ↗
56. Structural characterisation and thermal properties of exfoliated polystyrene/ZnAl layered double hydroxide nanocomposites prepared via solution intercalation10.1016/j.polymdegradstab.2004.09.009 ↗
57. Thermal degradation kinetics of polystyrene/cadmium sulfide composites10.1016/j.polymdegradstab.2009.03.004 ↗
58. Flame retardance and thermal degradation mechanism of polystyrene modified with aluminum hypophosphite10.1016/j.polymdegradstab.2013.12.014 ↗
59. Thermal stability and UV-shielding properties of polymethyl methacrylate and polystyrene modified with calcium carbonate nanoparticles10.1007/s10973-011-1686-3 ↗