journal article·2023-08-05Open access

Antimony Selenide Solar Cells Fabricated by Hybrid Reactive Magnetron Sputtering

Daniel Brito, Pedro Anacleto, Ana Pérez-Rodríguez, José Fonseca, Pedro Santos, Marina Alves, Alessandro Cavalli, Deepanjan Sharma, Marcel S. Claro, Nicoleta Nicoara, Sascha Sadewasser

Nanomaterials· Volume 13· Issue 15

Abstract

The fabrication of Sb2Se3 thin-film solar cells deposited by a pulsed hybrid reactive magnetron sputtering (PHRMS) was proposed and examined for different growth conditions. The influence of growth temperature and Se pulse period were studied in terms of morphology, crystal structure, and composition. The Sb2Se3 growth showed to be dependent on the growth temperature, with a larger crystal size for growth at 270 °C. By controlling the Se pulse period, the crystal structure and crystal size could be modified as a function of the supplied Se amount. The solar cell performance for Sb2Se3 absorbers deposited at various temperatures, Se pulse periods and thicknesses were assessed through current-voltage characteristics. A power conversion efficiency (PCE) of 3.7% was achieved for a Sb2Se3 solar cell with 900 nm thickness, Sb2Se3 deposited at 270 °C and Se pulses with 0.1 s duration and period of 0.5 s. Finally, annealing the complete solar cell at 100 °C led to a further improvement of the Voc, leading to a PCE of 3.8%, slightly higher than the best reported Sb2Se3 solar cell prepared by sputtering without post-selenization.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Phase-change materials and chalcogenides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

International Iberian Nanotechnology Laboratory, Av. Mestre José Veiga, 4715-330 Braga, Portugal

Departamento de Física e Astronomia, Faculdade de Ciências, Universidade do Porto, Rua do Campo Alegre s/n, 4169-007 Porto, Portugal

Nanotechnology Group, Department of Fundamental Physics, University of Salamanca, 37008 Salamanca, Spain

Centre of Physics of Minho and Porto Universities (CF-UM-UP), Azurém Campus, 4800-058 Guimarães, Portugal

Funding

“Micro-concentrator thin film solar cells (MiconCell)” project · Fundação para a Ciência e Tecnologia (FCT, Portugal) and the ERDF · FCT for the Ph.D. Grant · Spanish Ministry of Science, Innovation, and Universities and FEDER (ERDF: European Regional Development Fund) under the FEDER/Junta de Castilla y León Research Grant · Marie Skłodowska Curie-COFUND program under the Horizon 2020 research and innovation initiative of the European Union, within the framework of the USAL4Excellence program · MSCA grant CIGNUS

References (26)

Show source-provided references
1. A review of Sb2Se3 photovoltaic absorber materials and thin-film solar cells10.1016/j.solener.2020.03.009 ↗
2. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗
3. Sb2Se3 Thin-Film Solar Cells Exceeding 10% Power Conversion Efficiency Enabled by Injection Vapor Deposition Technology10.1002/adma.202202969 ↗
4. Characterization of basic physical properties of Sb2Se3 and its relevance for photovoltaics10.1007/s12200-017-0702-z ↗
5. Stable 6%-efficient Sb2Se3 solar cells with a ZnO buffer layer10.1038/nenergy.2017.46 ↗
6. Templated Growth and Passivation of Vertically Oriented Antimony Selenide Thin Films for High-Efficiency Solar Cells in Substrate Configuration10.1002/adfm.202110032 ↗
7. 9.2%-Efficient Core-Shell Structured Antimony Selenide Nanorod Array Solar Cells10.1038/s41467-018-07903-6 ↗
8. Efficiency Improvement of Sb2Se3 Solar Cells via Grain Boundary Inversion10.1021/acsenergylett.8b01456 ↗
9. Crystallographic orientation control and defect passivation for high-efficient antimony selenide thin-film solar cells10.1016/j.mtphys.2022.100772 ↗
10. Highly efficient and stable planar heterojunction solar cell based on sputtered and post-selenized Sb2Se3 thin film10.1016/j.nanoen.2019.103929 ↗
11. Tang, R., Chen, X., Luo, Y., Chen, Z., Liu, Y., Li, Y., Su, Z., Zhang, X., Fan, P., and Liang, G. (2020). Controlled sputtering pressure on high-quality sb2 se3 thin film for substrate configurated solar cells. Nanomaterials, 10.10.3390/nano10030574 ↗
12. Spark plasma sintering of Sb2Se3 sputtering target towards highly efficient thin film solar cells10.1016/j.solmat.2020.110530 ↗
13. Influence of Post-selenization Temperature on the Performance of Substrate-Type Sb2Se3Solar Cells10.1021/acsaem.1c00657 ↗
14. The complex defect chemistry of antimony selenide10.1039/C9TA02022E ↗
15. System for manufacturing complete Cu(In,Ga)Se2 solar cells in situ under vacuum10.1016/j.solener.2020.01.073 ↗
16. Effect of Cu-In-Ga Target Composition on Hybrid-Sputtered Cu (In, Ga)Se2 Solar Cells10.1109/JPHOTOV.2021.3086452 ↗
17. Magnetron sputtering deposition and selenization of Sb2Se3 thin film for substrate Sb2Se3/CdS solar cells10.1016/j.surfcoat.2018.12.102 ↗
18. Identifying Raman modes of Sb2Se3 and their symmetries using angle-resolved polarised Raman spectra10.1039/D0TA01783C ↗
19. Does Sb2Se3 Admit Nonstoichiometric Conditions? How Modifying the Overall Se Content Affects the Structural, Optical, and Optoelectronic Properties of Sb2Se3 Thin Films10.1021/acsami.1c20764 ↗
20. Optimisation of Sb2S3 thin-film solar cells via Sb2Se3 post-treatment10.1016/j.jpowsour.2022.232451 ↗
21. Fabrication of Sb2Se3 thin film solar cells by co-sputtering of Sb2Se3 and Se targets10.1016/j.solener.2019.09.046 ↗
22. Weak electron-phonon coupling and unusual electron scattering of topological surface states in Sb(111) by laser-based angle-resolved photoemission spectroscopy10.1088/0256-307X/31/6/067305 ↗
23. Enhanced Sb2Se3 solar cell performance through theory-guided defect control10.1002/pip.2900 ↗
24. Thermally induced structural evolution and performance of Sb2Se3 films and nanorods prepared by an easy sputtering method10.1016/j.solmat.2017.09.008 ↗
25. Effect of selenization temperature on the properties of Sb2Se3 thin films and solar cells by two-step method10.1007/s10854-019-02354-1 ↗
26. Sputtered and selenized Sb2Se3 thin-film solar cells with open-circuit voltage exceeding 500 mV10.1016/j.nanoen.2020.104806 ↗