Effect of Void Defects on the Indentation Behavior of Ni/Ni3Al Crystal
Source abstract
Abstract
Inconel 718 (IN 718) superalloys are widely used as engineering materials owing to their superior mechanical performance. And voids are unavoidable defects in IN 718 superalloy preparation, which dramatically affect the mechanical properties of IN 718 superalloys. In this work, the effects of void radius, distance from the top of the void to the substrate surface, and substrate temperature on the mechanical properties of the Ni/Ni3Al crystal are systematically investigated. It is shown that voids affect the formation of stair-rod dislocations and Shockley dislocations in the substrate, which in turn determines the mechanical properties. Thus, with the increase in void radius, Young’s modulus and hardness gradually decrease. With the increase in void distance, Young’s modulus and hardness increase and finally tend to be stable. In addition, the increase in substrate temperature leads to the interphase boundary becoming irregular and increases the defects in the γ and γ″ phases. As a result, Young’s modulus and hardness of the substrate decrease. This work aims to provide a guideline for investigating the indentation properties of Ni-based superalloys using MD.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory for Mechanical Behavior of Materials, Xi’an Jiaotong University, Xi’an 710049, China
School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an 710049, China
Funding
the National Natural Science Foundations of China
References (48)
Show source-provided references
1. Materials selection in design of structures and engines of supersonic aircrafts: A review10.1016/j.matdes.2012.10.001 ↗
2. Progress in the Research and Manufacture of GH4169 Alloy10.1016/S1006-706X(15)30054-6 ↗
3. Review on Grinding Technology of Nickel-based Superalloys Used for Aero-engine10.3901/JME.2019.01.189 ↗
4. Nickel-based superalloys for advanced turbine engines: Chemistry, microstructure, and properties10.2514/1.18239 ↗
5. Response to ldquoComments on Selective evolution of secondary gamma precipitation in a Ni-based single crystal superalloy both in the gamma matrix and at the dislocation nodes’rdquo10.1016/j.scriptamat.2016.10.013 ↗
6. Beyond Ni-based superalloys: Development of CoRe-based alloys for gas turbine applications at very high temperatures10.3139/146.110563 ↗
7. Enabling Large Superalloy Parts Using Compact Coprecipitation of gamma and gamma10.1007/s11661-017-4356-7 ↗
8. Microstructural aspects of fatigue in Ni-base superalloys
9. Recent Advancements in the Field of Ni-Based Superalloys10.1155/2021/9723450 ↗
10. Relative Density of GH4169 Superalloy Prepared by Selective Laser Melting
11. Microstructure and high temperature oxidation behavior of Pt-modified aluminide bond coats on Ni-base superalloys10.1016/j.pmatsci.2012.08.002 ↗
12. Microstructural and compositional design of Ni-based single crystalline superalloysd—A review10.1016/j.jallcom.2018.01.224 ↗
13. An overview of rhenium effect in single-crystal superalloys10.1007/s12598-015-0597-z ↗
14. Void coalescence and ductile failure in IN718 investigated via high-energy synchrotron X-ray tomography and diffraction10.1016/j.jmps.2020.104155 ↗
15. Effect of rhenium and ruthenium on the deformation and fracture mechanism in nickel-based model single crystal superalloys during the in-situ tensile at room temperature10.1016/j.msea.2016.10.107 ↗
16. Investigation on microstructure evolution and fracture morphology of single crystal nickel-base superalloys under creep-fatigue interaction loading10.1016/j.msea.2017.05.018 ↗
17. Effect of Re on mechanical properties of single crystal Ni-based superalloys: Insights from first-principle and molecular dynamics10.1016/j.jallcom.2021.158643 ↗
18. Atomistic simulation studies of Ni-based superalloys10.1016/j.jallcom.2020.157355 ↗
19. Molecular dynamics study on the evolution of interfacial dislocation network and mechanical properties of Ni-based single crystal superalloys10.1016/j.physleta.2018.03.031 ↗
20. Phase prediction of Ni-base superalloys via high-throughput experiments and machine learning10.1080/21663831.2020.1815093 ↗
21. High throughput experiment assisted discovery of new Ni-base superalloys10.1016/j.scriptamat.2019.11.019 ↗
22. Atomistic simulation of creep deformation mechanisms in nickel-based single crystal superalloys10.1016/j.msea.2021.140977 ↗
23. Ni/Ni3Al interface-dominated nanoindentation deformation and pop-in events10.1088/1361-6528/ac3d62 ↗
24. Atomic simulation of void location effect on the void growth in nickel-based single crystal10.1016/j.commatsci.2018.12.053 ↗
25. Size effect on the plastic deformation of pre-void Ni/Ni3Al interface under uniaxial tension: A molecular dynamics simulation10.1016/j.commatsci.2018.02.046 ↗
26. Atomic-scale investigations on dislocation-precipitate interactions influenced by voids in Ni-based superalloys10.1016/j.ijmecsci.2021.106945 ↗
27. Molecular Dynamics Simulation of the Evolution of Interfacial Dislocation Network and Stress Distribution of a Ni-Based Single-Crystal Superalloy10.1007/s40195-016-0420-3 ↗
28. Atomistic modeling of the gamma and gamma ’-phases of the Ni-Al system10.1016/j.actamat.2003.11.026 ↗
29. Atomsk: A tool for manipulating and converting atomic data files10.1016/j.cpc.2015.07.012 ↗
30. Directional coarsening in nickel-base single-crystals with high-volume fractions of coherent precipitates10.1016/0956-7151(94)90011-6 ↗
31. Insight into gamma-Ni/gamma ’-Ni3Al interfacial energy affected by alloying elements10.1016/j.matdes.2017.07.028 ↗
32. Molecular dynamics simulation of nanoindentation in Al and Fe: On the influence of system characteristics10.1016/j.apsusc.2021.149221 ↗
33. Influence of crystal anisotropy on elastic deformation and onset of plasticity in nanoindentation: A simulational study10.1063/1.3340523 ↗
34. Re segregation at interfacial dislocation network in a nickel-based superalloy10.1016/j.actamat.2018.05.025 ↗
35. Fast parallel algorithms for short-range molecular-dynamics10.1006/jcph.1995.1039 ↗
36. Quantitative study on interactions between interfacial misfit dislocation networks and matrix dislocations in Ni-based single crystal superalloys10.1016/j.camss.2017.07.004 ↗
37. Nanoindentation of NiAl and Ni3Al crystals on (100), (110), and (111) surfaces: A molecular dynamics study10.1063/1.4867168 ↗
38. Molecular-dynamics at constant temperature and pressure10.1103/PhysRevE.47.343 ↗
39. Hoover npt dynamics for systems varying in shape and size10.1080/00268979300100371 ↗
40. Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
41. Automated identification and indexing of dislocations in crystal interfaces10.1088/0965-0393/20/8/085007 ↗
42. Compliant contact force models in multibody dynamics: Evolution of the Hertz contact theory10.1016/j.mechmachtheory.2012.02.010 ↗
43. Atomistic simulations of the nanoindentation-induced incipient plasticity in Ni3Al crystal10.1016/j.commatsci.2015.12.045 ↗
44. Grain boundary effects on nanoindentation of Fe bicrystal using molecular dynamic10.1016/j.mechmat.2016.08.016 ↗
45. Multiscale modelling of indentation in FCC metals: From atomic to continuum10.1016/j.crhy.2010.07.007 ↗
46. Plastic deformation in nanoindentation of tantalum: A new mechanism for prismatic loop formation10.1016/j.actamat.2014.06.058 ↗
47. Large scale atomistic simulation of size effects during nanoindentation: Dislocation length and hardness10.1016/j.msea.2015.03.024 ↗
48. Atomic level stresses10.1016/j.pmatsci.2011.01.004 ↗