Defect-Engineered Elastic CNC/Chitosan-Based Carbon Aerogel with Wideband Microwave Absorption
Source abstract
Abstract
The burgeoning electromagnetic pollution from 5G/6G technologies demands lightweight, broadband, and mechanically robust electromagnetic microwave absorbers (EMWAs). Conventional carbon aerogels suffer from structural fragility and inadequate electromagnetic dissipation. Herein, we propose a defect-engineering strategy through precise optimization of the chitosan (CS)/cellulose nanocrystal (CNC) ratio to fabricate elastic boron nitride nanosheet (BNNS)-embedded carbon aerogels. By fixing BNNS content for optimal impedance matching and modulating the CS/CNC ratio of the aerogel, we achieve synergistic control over hierarchical microstructure, defect topology, and electromagnetic response. The aerogel exhibits a wide effective absorption bandwidth (EAB) of 8.3 GHz at a thickness of 3.6 mm and an excellent reflection loss of −52.79 dB (>99.999% attenuation), surpassing most biomass-derived EMWAs. The performance stems from CNC-derived topological defects enabling novel polarization pathways and BNNS-triggered interfacial polarization, while optimal graphitization (ID/IG = 1.08) balances conductive loss. Simultaneously, the optimal CS/CNC ratio facilitates the formation of a stable and flexible framework. The long-range ordered micro-arch lamellar structure endows the aerogel with promising elasticity, which retains 82% height after 1000 cyclic compression at 50% strain. This work paves the way for biomass-derived carbon aerogels as next-generation wearable and conformal EMWAs with broadband absorption.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Aerogels and thermal insulation · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Science and Technology on Advanced Ceramic Fibers and Composites Laboratory, College of Aerospace Science and Engineering, National University of Defense Technology, Changsha 410073, China
Funding
Foundation of Science and Technology on Advanced Ceramic Fibers and Composites Laboratory · National Natural Science Foundation of China
References (45)
Show source-provided references
1. Bamboo-like carbon nanotubes assisted assembly of magnetic-dielectric aerogels to enhance microwave attenuation10.1016/j.carbon.2024.119973 ↗
2. Simkó, M., and Mattsson, M.O. (2019). 5G Wireless Communication and Health Effects—A Pragmatic Review Based on Available Studies Regarding 6 to 100 GHz. Int. J. Environ. Res. Public Health, 16.10.3390/ijerph16183406 ↗
3. Bending elastic modulus of a polymer-doped lyotropic lamellar phase10.1016/j.jcis.2020.08.034 ↗
4. Jang, D., Kim, B.J., and Nam, I.W. (2022). A Comprehensive Study on EMI Shielding Performance of Carbon Nanomaterials-Embedded CFRP or GFRP Composites. Polymers, 14.10.3390/polym14235224 ↗
5. Interface-induced dual-pinning mechanism enhances low-frequency electromagnetic wave loss10.1038/s41467-024-47537-5 ↗
6. Ultra-strength polyurethane/MOF-derived composites with self-healing and recycling capabilities and highly efficient microwave absorption properties10.1039/D3TC03496H ↗
7. An interpenetrating-network-like structure in cellulose nanocrystal/polyurethane composites and the relative strengthening mechanism10.1007/s10570-022-04612-8 ↗
8. Freeze Casting: From Low-Dimensional Building Blocks to Aligned Porous Structures—A Review of Novel Materials, Methods, and Applications10.1002/adma.201907176 ↗
9. Linking Renewable Cellulose Nanocrystal into Lightweight and Highly Elastic Carbon Aerogel10.1021/acssuschemeng.9b07833 ↗
10. Flexible Waterborne Polyurethane/Cellulose Nanocrystal Composite Aerogels by Integrating Graphene and Carbon Nanotubes for a Highly Sensitive Pressure Sensor10.1021/acssuschemeng.1c03068 ↗
11. Enhancing Defect-Induced Dipole Polarization Strategy of SiC@MoO3 Nanocomposite Towards Electromagnetic Wave Absorption10.1007/s40820-024-01478-2 ↗
12. sp/sp2 bonding ratio in sp rich amorphous carbon thin films10.1016/j.carbon.2006.04.016 ↗
13. Thomas, B., Geng, S., Sain, M., and Oksman, K. (2021). Hetero-Porous, High-Surface Area Green Carbon Aerogels for the Next-Generation Energy Storage Applications. Nanomaterials, 11.10.3390/nano11030653 ↗
14. Reusable Green Aerogels from Cross-Linked Hairy Nanocrystalline Cellulose and Modified Chitosan for Dye Removal10.1021/acs.langmuir.6b03084 ↗
15. A multilevel gradient structural carbon derived from naturally preprocessed biomass10.1016/j.carbon.2020.07.020 ↗
16. Li, J., Chen, J., Zhu, M., Song, H., and Zhang, H. (2019). Interfacial Characteristics of Boron Nitride Nanosheet/Epoxy Resin Nanocomposites: A Molecular Dynamics Simulation. Appl. Sci., 9.10.3390/app9142832 ↗
17. Quantitative Analysis of Surface Functional Groups on the Amorphous Carbon in Magnetic Media with XPS Preceded by Chemical Derivatization10.1246/bcsj.80.1405 ↗
18. Cross-linking impacts the physical properties of mycelium leather alternatives by targeting hydroxyl groups of polysaccharides and amino groups of proteins10.1016/j.heliyon.2024.e36263 ↗
19. Yao, C.J., Liu, X., and Risen, W.M. (2011). Biopolymer-containing aerogels: Chitosan-silica hybrid aerogels. Aerogels Handbook, Springer.10.1007/978-1-4419-7589-8_18 ↗
20. Loryuenyong, V., Nakhlo, W., Srikaenkaew, P., Yaidee, P., Buasri, A., and Eiad-Ua, A. (2024). Enhanced CO2 Capture Potential of Chitosan-Based Composite Beads by Adding Activated Carbon from Coffee Grounds and Crosslinking with Epichlorohydrin. Int. J. Mol. Sci., 25.10.3390/ijms25168916 ↗
21. Oxidized single-walled carbon nanotubes and nanocones: A DFT study10.1039/C7RA00301C ↗
22. Mechanical and electromechanical properties of functionalized hexagonal boron nitride nanosheet: A density functional theory study10.1063/1.5043252 ↗
23. Impurities Effects on the Electronic Structure of Titanium Dioxide10.1088/1742-6596/302/1/012034 ↗
24. Remarkably Enhanced Methane Sensing Performance at Room Temperature via Constructing a Self-Assembled Mulberry-Like ZnO/SnO2 Hierarchical Structure10.1002/eem2.12624 ↗
25. Super-elastic and fatigue resistant carbon material with lamellar multi-arch microstructure10.1038/ncomms12920 ↗
26. Carbon fibers from polyacrylonitrile/cellulose nanocrystal nanocomposite fibers10.1016/j.carbon.2019.01.045 ↗
27. Xyloglucan-cellulose nanocrystal-chitosan double network hydrogels for soft actuators10.1016/j.carbpol.2022.119753 ↗
28. Rege, A. (2021). Constitutive Modeling of the Densification Behavior in Open-Porous Cellular Solids. Materials, 14.10.3390/ma14112731 ↗
29. Dielectric Loss Mechanism in Electromagnetic Wave Absorbing Materials10.1002/advs.202105553 ↗
30. Xu, W., Liu, N., and Lu, Z. (2024). Recent Progress of Iron-Based Magnetic Absorbers and Its Applications in Elastomers: A Review. Materials, 17.10.3390/ma17164058 ↗
31. A double negative (DNG) metamaterial based on parallel double-E square split resonators for multi-band applications: Simulation and experiment10.1016/j.rinp.2023.106302 ↗
32. Expanding the upper limits of robustness of cellulose nanocrystal aerogels: Outstanding mechanical performance and associated pore compression response of chiral-nematic architectures10.1039/C9TA03950C ↗
33. Enhancing electromagnetic wave absorption with core-shell structured SiO2@MXene@MoS2 nanospheres10.1002/cey2.502 ↗
34. Endo, T., Hosomi, S., Fujii, S., Ninomiya, K., and Takahashi, K. (2017). Nano-Structural Investigation on Cellulose Highly Dissolved in Ionic Liquid: A Small Angle X-ray Scattering Study. Molecules, 22.10.3390/molecules22010178 ↗
35. Recent progress in microwave absorption of nanomaterials: Composition modulation, structural design, and their practical applications10.1049/iet-nde.2018.0014 ↗
36. New Approach to Designing Functional Materials for Stealth Technology: Radar Experiment with Bilayer Absorbers and Optimization of the Reflection Loss
37. Sun, Q., Yang, X., Shu, T., Yang, X., Qiao, M., Wang, D., Liu, Z., Li, X., Rao, J., and Zhang, Y. (2022). In Situ Synthesis of C-N@NiFe2O4@MXene/Ni Nanocomposites for Efficient Electromagnetic Wave Absorption at an Ultralow Thickness Level. Molecules, 28.10.3390/molecules28010233 ↗
38. Vacancies-engineered and heteroatoms-regulated N-doped porous carbon aerogel for ultrahigh microwave absorption10.1016/j.carbon.2020.07.063 ↗
39. Lightweight and efficient microwave absorbing materials based on walnut shell-derived nano-porous carbon10.1039/C7NR02628E ↗
40. Structural Engineering of Hierarchical Aerogels Comprised of Multi-dimensional Gradient Carbon Nanoarchitectures for Highly Efficient Microwave Absorption10.1007/s40820-021-00667-7 ↗
41. A new flexible and ultralight carbon foam/Ti3C2TX MXene hybrid for high-performance electromagnetic wave absorption10.1039/C9RA09817H ↗
42. MOF-derived multi-interface carbon-based composites with enhanced polarization loss and efficient microwave absorption10.1080/19475411.2022.2095456 ↗
43. Hierarchical Ti3 C2 Tx MXene/Carbon Nanotubes Hollow Microsphere with Confined Magnetic Nanospheres for Broadband Microwave Absorption10.1002/smll.202104380 ↗
44. Radar Cross Section Modelling and Analysis of Static and Dynamic Targets using MATLAB
45. Understanding interfacial engineering of surface functionalized boron nitride nanosheets within thermal interface materials10.1007/s40843-024-3237-x ↗