journal article·2025-08-11Open access

High-Efficiency Strategy for Reducing Decomposition Potential of Lithium Formate as Cathode Prelithiation Additive for Lithium-Ion Batteries

Yaqin Guo, Ti Yin, Zeyu Liu, Qi Wu, Yuheng Wang, Kangyu Zou, Tianxiang Ning, Lei Tan, Lingjun Li

Nanomaterials· Volume 15· Issue 16

Abstract

Lithium-ion batteries (LIBs) have attracted extensive attention as a distinguished electrochemical energy storage system due to their high energy density and long cycle life. However, the initial irreversible lithium loss during the first cycle caused by the formation of the solid electrolyte interphase (SEI) leads to the prominent reduction in the energy density of LIBs. Notably, lithium formate (HCOOLi, LFM) is regarded as a promising cathode prelithiation reagent for effective lithium supplementation due to its high theoretical capacity of 515 mAh·g−1. Nevertheless, the stable Li-O bond of LFM brings out the high reaction barrier accompanied by the high decomposition potential, which impedes its practical applications. To address this issue, a feasible strategy for reducing the reaction barrier has been proposed, in which the decomposition potential of LFM from 4.84 V to 4.23 V resulted from the synergetic effects of improving the electron/ion transport kinetics and catalysis of transition metal oxides. The addition of LFM to full cells consisting of graphite anodes and LiNi0.834Co0.11Mn0.056O2 cathodes significantly enhanced the electrochemical performance, increasing the reversible discharge capacity from 156 to 169 mAh·g−1 at 0.1 C (2.65–4.25 V). Remarkably, the capacity retention after 100 cycles improved from 72.8% to 94.7%. Our strategy effectively enables LFM to serve as an efficient prelithiation additive for commercial cathode materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Extraction and Separation Processes · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Changsha University of Science and Technology, Changsha 410114, China

Funding

National Natural Science Foundation of China · Outstanding Youth Foundation of Hunan Province · Science and Technology Innovation Program of Hunan Province · Natural Science Foundation of Hunan Province · Scientific Research Fund of the Hunan Provincial Department of Education

References (47)

Show source-provided references
1. A comprehensive review of stationary energy storage devices for large scale renewable energy sources grid integration10.1016/j.rser.2022.112213 ↗
2. Future energy infrastructure, energy platform and energy storage10.1016/j.nanoen.2022.107915 ↗
3. The matter of a clean energy future10.1126/science.add5094 ↗
4. Constructing Robust Cross-Linked Binder Networks for Silicon Anodes with Improved Lithium Storage Performance10.1021/acsami.1c14907 ↗
5. Designing Positive Electrodes with High Energy Density for Lithium-Ion Batteries10.1039/D0TA10252K ↗
6. Jin, C., Huang, Y., Li, L., Wei, G., Li, H., Shang, Q., Ju, Z., Lu, G., Zheng, J., and Sheng, O. (2023). A Corrosion Inhibiting Layer to Tackle the Irreversible Lithium Loss in Lithium Metal Batteries. Nat. Commun., 8269.10.1038/s41467-023-44161-7 ↗
7. Recent Advances in Prelithiation Materials and Approaches for Lithium-Ion Batteries and Capacitors10.1016/j.ensm.2020.07.009 ↗
8. Toward Critical Electrode/Electrolyte Interfaces in Rechargeable Batteries10.1002/adfm.201909887 ↗
9. Zhang, S., Wu, S., Murakami, K., Hwang, J., and Matsumoto, K. (2025). Intermediate-Temperature Operable Secondary Batteries. Accounts Mater. Res., 6.10.1021/accountsmr.5c00132 ↗
10. Challenges of Prelithiation Strategies for next Generation High Energy Lithium-Ion Batteries10.1016/j.ensm.2022.02.005 ↗
11. Molecularly Compensated Pre-Metallation Strategy for Metal-Ion Batteries and Capacitors10.1002/anie.202103569 ↗
12. Pre-Lithiation Strategies for Next-Generation Practical Lithium-Ion Batteries10.1002/advs.202005031 ↗
13. Progress and Challenges of Prelithiation Technology for Lithium-ion Battery10.1002/cey2.256 ↗
14. A High-Efficient Stable Surface-Prelithiated Li1.2Ni0.13Co0.13Mn0.54O2 Cathode Enabled by Sacrificial Lithium Nitrides for High-Energy-Density Lithium-Ion Batteries10.1016/j.ensm.2024.103204 ↗
15. Addressing the Initial Lithium Loss of Lithium-Ion Batteries by Introducing Pre-Lithiation Reagent Li5FeO4/C in the Cathode Side10.1016/j.electacta.2024.143918 ↗
16. Decomposition of Li2O2 as the Cathode Prelithiation Additive for Lithium-Ion Batteries without an Additional Catalyst and the Initial Performance Investigation10.1149/1945-7111/ac3e46 ↗
17. LiF/Fe Composite for Ni-Rich Cathode Prelithiation: Synthesis, Bilayer Structured Electrode and Lithium Loss Compensation10.1016/j.cej.2024.149550 ↗
18. Nanocatalysis in Cathode Pre-Lithiation for Lithium-Ion Batteries: Progress and Challenges10.1039/D4NR04002C ↗
19. Promises and Challenges of the Practical Implementation of Prelithiation in Lithium-Ion Batteries10.1002/aenm.202101565 ↗
20. Surface Coating Engineering of Prelithiation Cathode Additives for Lithium-Ion Batteries10.1016/j.elecom.2024.107726 ↗
21. Zhang, Z., Zhang, K., Li, Y., Li, Z., Wu, C., and Pan, J.H. (2025). Engineering Nanostructure, Interface, and Prelithiation of Advanced Silicon-Based Lithium-Ion Battery Anodes. Energy Mater. Adv., 6.10.34133/energymatadv.0175 ↗
22. Mg-doped, Carbon-coated, and Prelithiated SiOx as Anode Materials with Improved Initial Coulombic Efficiency for Lithium-ion Batteries10.1002/cey2.421 ↗
23. Prelithiation Strategies for Silicon-Based Anode in High Energy Density Lithium-Ion Battery10.1016/j.gee.2022.08.005 ↗
24. Recent Advances in Prelithiation of Silicon Anode: Enhanced Strategy for Boosting Practicability of Li-Ion Battery10.1149/1945-7111/aceb36 ↗
25. Silicon-Stabilized Lithium Metal Powder (SLMP) Composite Anodes for Fast Charging by in-Situ Prelithiation10.1016/j.jpowsour.2023.233326 ↗
26. Boosting the Capability of Li2C2O4 as Cathode Pre-Lithiation Additive for Lithium-Ion Batteries10.1007/s12274-022-5146-0 ↗
27. Lattice Engineering on Li2CO3-Based Sacrificial Cathode Prelithiation Agent for Improving the Energy Density of Li-ion Battery Full-Cell10.1002/adma.202312159 ↗
28. Opportunities and Challenges of Li2C4O4 as Pre-Lithiation Additive for the Positive Electrode in NMC622||Silicon/Graphite Lithium Ion Cells10.1002/advs.202201742 ↗
29. Advancing Anode-Free Lithium Metal Battery via Environmentally Resilient Lithium Oxalate as a Low-Voltage Prelithiation Additive10.1021/acsaem.4c03066 ↗
30. Liu, J., Lin, J., Yin, Z., Tong, Z., Liu, J., Wang, Z., Zhou, Y., and Li, J. (2024). Electrocatalytic Decomposition of Lithium Oxalate-Based Composite Microspheres as a Prelithiation Additive in Lithium-Ion Batteries. Molecules, 29.10.3390/molecules29132975 ↗
31. Effect of silicon carbide-based iron catalyst on reactor optimization for non-oxidative direct conversion of methane10.1016/j.jechem.2023.03.019 ↗
32. Hierarchical Spherical Mo2C/N-doped Graphene Catalyst Facilitates Low-voltage Li2C2O4 Prelithiation10.1016/j.nanoen.2023.108757 ↗
33. Critical Role of NiO Support Morphology for High Activity of Au/NiO Nanocatalysts in CO Oxidation10.1016/j.isci.2024.110255 ↗
34. Promotion of Borophene/NiO-Based Electrocatalyst for Oxygen Evolution Reaction10.1016/j.cej.2023.146714 ↗
35. Sputtered Cu-doped NiO thin films as an efficient electrocatalyst for methanol oxidation10.1039/D3RA00380A ↗
36. Stable and Efficient Hydrogen Evolution Reaction Catalyzed by NiO-Rh2P Heterostructure Electrocatalyst10.1016/j.catcom.2022.106404 ↗
37. Catalytic Combustion of Vinyl Chloride Emissions over Co3O4 Catalysts with Different Crystallite Sizes10.1007/s12598-020-01512-3 ↗
38. Liu, W., Men, Y., Ji, F., Shi, F., Wang, J., Liu, S., Magkoev, T.T., and An, W. (2023). Boosting Catalytic Combustion of Ethanol by Tuning Morphologies and Exposed Crystal Facets of α-Mn2O3. Catalysts, 13.10.3390/catal13050865 ↗
39. Effect of the Morphology of Silver Layer on Electrical Conductivity and Electrochemical Performance of Silver/Reduced Graphene Oxide/Cotton Fabric Composite as a Flexible Supercapacitor Electrode10.1016/j.est.2021.103042 ↗
40. Stenina, I., Minakova, P., Kulova, T., and Yaroslavtsev, A. (2022). Electrochemical Properties of LiFePO4 Cathodes: The Effect of Carbon Additives. Batteries, 8.10.3390/batteries8090111 ↗
41. Stabilization of Li[NixMnyCo1-x-y]O2 Structure Using a Mixture of Super-P and Vapor-Grown Carbon Fiber as Conducting Additives10.1016/j.jiec.2024.08.046 ↗
42. Choi, J.H., Choi, S., Embleton, T.J., Ko, K., Saqib, K.S., Ali, J., Jo, M., Hwang, J., Park, S., and Kim, M. (2023). The Effect of Conductive Additive Morphology and Crystallinity on the Electrochemical Performance of Ni-Rich Cathodes for Sulfide All-Solid-State Lithium-Ion Batteries. Nanomaterials, 13.10.3390/nano13233065 ↗
43. Impact of Particle Size Distribution on Performance of Lithium-Ion Batteries10.1002/celc.202001249 ↗
44. Enhancing the Efficiency of High Solid Anaerobic Digestion of Empty Fruit Bunches under Thermophilic Conditions by Particle Size Reduction and Co-Digestion with Palm Oil Mill Effluent
45. Unraveling the Role of Particle Size and Nanostructuring on the Oxygen Evolution Activity of Fe-Doped NiO10.1021/acscatal.4c02329 ↗
46. Shifting the Scaling Relations of Single-Atom Catalysts for Facile Methane Activation by Tuning the Coordination Number10.1039/D0SC05632D ↗
47. Lou, D., Song, G., Xu, K., Zhang, Y., and Zhu, K. (2024). The Oxidation Performance of a Carbon Soot Catalyst Based on the Pt-Pd Synergy Effect. Energies, 17.10.3390/en17071737 ↗