journal article·2021-06-17Open access

Carrier Fibers for the Safe Dosage of Nanoparticles in Nanocomposites: Nanomechanical and Thermomechanical Study on Polycarbonate/Boehmite Electrospun Fibers Embedded in Epoxy Resin

Natalia Cano Murillo, Media Ghasem Zadeh Khorasani, Dorothee Silbernagl, Farnaz Emamverdi, Karen Cacua, Vasile-Dan Hodoroaba, Heinz Sturm

Nanomaterials· Volume 11· Issue 6

Abstract

The reinforcing effect of boehmite nanoparticles (BNP) in epoxy resins for fiber composite lightweight construction is related to the formation of a soft but bound interphase between filler and polymer. The interphase is able to dissipate crack propagation energy and consequently increases the fracture toughness of the epoxy resin. Usually, the nanoparticles are dispersed in the resin and then mixed with the hardener to form an applicable mixture to impregnate the fibers. If one wishes to locally increase the fracture toughness at particularly stressed positions of the fiber-reinforced polymer composites (FRPC), this could be done by spraying nanoparticles from a suspension. However, this would entail high costs for removing the nanoparticles from the ambient air. We propose that a fiber fleece containing bound nanoparticles be inserted at exposed locations. For the present proof-of-concept study, an electrospun polycarbonate nonwoven and taurine modified BNP are proposed. After fabrication of suitable PC/EP/BNP composites, the thermomechanical properties were tested by dynamic mechanical analysis (DMA). Comparatively, the local nanomechanical properties such as stiffness and elastic modulus were determined by atomic force microscopy (AFM). An additional investigation of the distribution of the nanoparticles in the epoxy matrix, which is a prerequisite for an effective nanocomposite, is carried out by scanning electron microscopy in transmission mode (TSEM). From the results it can be concluded that the concept of carrier fibers for nanoparticles is viable.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Tribology and Wear Analysis · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Bundesanstalt für Materialforschung und -prüfung (BAM), Unter den Eichen 87, 12205 Berlin, Germany

Department of Mechanical Engineering and Transport Systems, Technical University of Berlin, 10587 Berlin, Germany

Faculty of Engineering, Instituto Tecnológico Metropolitano (ITM), Cra. 54A #30-01, Medellín 050013, Colombia

Funding

Deutsche Forschungsgemeinschaft · Minciencias Colombia

References (46)

Show source-provided references
1. Waniek, T., Braun, U., Silbernagl, D., and Sturm, H. (2021). The impact of water released from boehmite nanoparticles during curing in epoxy-based nanocomposites. J. Appl. Polym. Sci., 51006.10.1002/app.51006 ↗
2. Mechanical properties of epoxy/boehmite nanocomposites in dependency of mass fraction and surface modification—An experimental and numerical approach10.1016/j.polymer.2018.02.059 ↗
3. Effects of Al(OH)O nanoparticle agglomerate size in epoxy resin on tension, bending, and fracture properties10.1007/s11051-017-3831-9 ↗
4. Elastic interphase properties of nanoparticle/epoxy nanocomposites: A molecular dynamics study10.1016/j.compositesb.2019.107211 ↗
5. The effect of boehmite nanoparticles (γ-AlOOH) on nanomechanical and thermomechanical properties correlated to crosslinking density of epoxy10.1016/j.polymer.2018.12.054 ↗
6. Topolniak, I., Hodoroaba, V.-D., Pfeifer, D., Braun, U., and Sturm, H. (2019). Boehmite Nanofillers in Epoxy Oligosiloxane Resins: Influencing the Curing Process by Complex Physical and Chemical Interactions. Materials, 12.10.3390/ma12091513 ↗
7. Nanoparticles with various surface modifications as functionalized cross-linking agents for composite resin materials10.1016/j.compscitech.2012.03.024 ↗
8. Electrospun nanofiber: Emerging reinforcing filler in polymer matrix composite materials10.1016/j.progpolymsci.2017.08.002 ↗
9. Electrospun nanofibers for enhancing structural performance of composite materials10.1002/pat.1837 ↗
10. Mode I Interlaminar Fracture of Interleaved Graphite/Epoxy10.1177/002199839202600306 ↗
11. Mechanical properties of electrospun nanofiber reinforced/interleaved epoxy matrix composites—A review10.1002/pc.25539 ↗
12. Improvement of the mode I interlaminar fracture toughness of carbon fiber composite reinforced with electrospun nylon nanofiber10.1016/j.compositesb.2019.01.065 ↗
13. Monteserín, C., Blanco, M., Murillo, N., Pérez-Márquez, A., Maudes, J., Gayoso, J., Laza, J.M., Aranzabe, E., and Vilas, J.L. (2018). Effect of Different Types of Electrospun Polyamide 6 Nanofibres on the Mechanical Properties of Carbon Fibre/Epoxy Composites. Polymer, 10.10.3390/polym10111190 ↗
14. On Consideration the Mode I Fracture Response of CFRP Composite Interleaved by Composite Nanofibers10.1016/j.mspro.2014.06.213 ↗
15. Size limitations on achieving tough and healable fibre reinforced composites through the use of thermoplastic nanofibres10.1016/j.compositesa.2018.07.002 ↗
16. Superior mechanical enhancement of epoxy composites reinforced by polyimide nanofibers via a vacuum-assisted hot-pressing10.1016/j.compscitech.2019.02.012 ↗
17. Electrospun nanofiber reinforced and toughened composites through in situ nano-interface formation10.1016/j.compscitech.2008.08.033 ↗
18. Co-electrospinning of core-shell fibers using a single-nozzle technique10.1021/la063194q ↗
19. Development of a transparent PMMA composite reinforced with nanofibers10.1002/pc.20551 ↗
20. Murillo, N.C., Khorasani, M.G.Z., Silbernagl, D., Hahn, M.B., Hodoroaba, V., and Sturm, H. (2021). Nanomechanical study of polycarbonate/boehmite nanoparticles/epoxy ternary composite and their interphases. J. Appl. Polym. Sci., 138.10.1002/app.50231 ↗
21. Electrospun nanofibers as reinforcement for composite laminates materials—A review10.1016/j.compstruct.2017.09.021 ↗
22. Rubbery nanofibrous interleaves enhance fracture toughness and damping of CFRP laminates10.1016/j.matdes.2020.109049 ↗
23. Mechanical Properties of Boehmite Evaluated by Atomic Force Microscopy Experiments and Molecular Dynamic Finite Element Simulations
24. Fityk: A general-purpose peak fitting program10.1107/S0021889810030499 ↗
25. Performance of High-Resolution SEM/EDX Systems Equipped with Transmission Mode (TSEM) for Imaging and Measurement of Size and Size Distribution of Spherical Nanoparticles10.1017/S1431927614000014 ↗
26. Cano Murillo, N., Szymoniak, P., Smales, G.J., Sturm, H., and Schönhals, A. (2021). Fast Scanning Calorimetric Studies on Electrospun Nanocomposites of Polycarbonate and Taurine Modified Boehmite Nanoparticles, Unpublished work.
27. Controlling Surface Morphology of Electrospun Polystyrene Fibers: Effect of Humidity and Molecular Weight in the Electrospinning Process10.1021/ma0351975 ↗
28. Maneuvering the Internal Porosity and Surface Morphology of Electrospun Polystyrene Yarns by Controlling the Solvent and Relative Humidity10.1021/la400747y ↗
29. Interphase study of thermoplastic modified epoxy matrix composites: Phase behaviour around a single fibre influenced by heating rate and surface treatment10.1016/j.compositesa.2010.02.016 ↗
30. Cure kinetics, morphological and dynamic mechanical analysis of diglycidyl ether of bisphenol-A epoxy resin modified with hydroxyl terminated poly (ether ether ketone) containing pendent tertiary butyl groups10.1016/j.polymer.2006.05.029 ↗
31. Competition of nanoparticle-induced mobilization and immobilization effects on segmental dynamics of an epoxy-based nanocomposite10.1039/D0SM00744G ↗
32. Network structure in epoxies: 6. The growth process investigated by neutron scattering10.1016/0032-3861(89)90205-X ↗
33. Molecular network development and evolution of nanoscale morphology in an epoxy-amine thermoset polymer10.1002/app.36763 ↗
34. Insights into Epoxy Network Nanostructural Heterogeneity Using AFM-IR10.1021/acsami.5b10767 ↗
35. Bulk chemical composition contrast from attractive forces in AFM force spectroscopy10.3762/bjnano.12.5 ↗
36. Short- and Long-Range Mechanical and Chemical Interphases Caused by Interaction of Boehmite (gamma-AlOOH) with Anhydride-Cured Epoxy Resins10.3390/nano9060853 ↗
37. Khorasani, M.G.Z., Silbernagl, D., Platz, D., and Sturm, H. (2019). Insights into Nano-Scale Physical and Mechanical Properties of Epoxy/Boehmite Nanocomposite Using Different AFM Modes. Polymer, 11.10.3390/polym11020235 ↗
38. Investigation of the curing behaviour of carbon fibre epoxy prepreg by Dynamic Mechanical Analysis DMA10.1016/j.polymertesting.2012.11.004 ↗
39. Effect of chain flexibility in the network structure on the viscoelasticity of epoxy thermosets10.1007/s10965-011-9595-5 ↗
40. The kinetics, thermal and mechanical properties of epoxy-polycarbonate blends cured with aromatic amine10.1007/s10965-006-0047-6 ↗
41. Mechanical characterization of copolymers based on benzoxazine and epoxy10.1016/0032-3861(96)00303-5 ↗
42. Insights into the curing kinetics of epoxy/PLA: Implications of the networking structure10.3144/expresspolymlett.2020.96 ↗
43. Heterogeneous network polymers. IV. Dynamic mechanical properties—Composition—Phase structure relationships10.1002/app.1977.070211216 ↗
44. Characterization of thermosetting materials by torsional braid analysis10.1002/pen.760160513 ↗
45. Blends of a diglycidylether epoxy with bisphenol-A polycarbonate or poly (methyl methacrylate): Cases of miscibility with or without specific interactions10.1016/0032-3861(96)85363-8 ↗
46. Development and characterization of thermosetting-thermoplastic polymer blends for applications in damage-tolerant composites10.1002/polb.1988.090260103 ↗