Membranes of Polymer of Intrinsic Microporosity PIM-1 for Gas Separation: Modification Strategies and Meta-Analysis
Source abstract
Abstract
Abstract Polymers of intrinsic microporosity (PIMs) have received considerable attention for making high-performance membranes for carbon dioxide separation over the last two decades, owing to their highly permeable porous structures. However, challenges regarding its relatively low selectivity, physical aging, and plasticisation impede relevant industrial adoptions for gas separation. To address these issues, several strategies including chain modification, post-modification, blending with other polymers, and the addition of fillers, have been developed and explored. PIM-1 is the most investigated PIMs, and hence here we review the state-of-the-arts of the modification strategies of PIM-1 critically and discuss the progress achieved for addressing the aforementioned challenges via meta-analysis. Additionally, the development of PIM-1-based thin film composite membranes is commented as well, shedding light on their potential in industrial gas separation. We hope that the review can be a timely snapshot of the relevant state-of-the-arts of PIMs guiding future design and optimisation of PIMs-based membranes for enhanced performance towards a higher technology readiness level for practical applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Membrane Separation and Gas Transport · Membrane Separation Technologies · Graphene research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. N.B. McKeown, P.M. Budd, B. Ghanem, K. Msayib, Microporous polymer material. International patent PCT WO 2005/012397 (2005).
2. P.M. Budd, B.S. Ghanem, S. Makhseed, N.B. McKeown, K.J. Msayib et al., Polymers of intrinsic microporosity (PIMs): robust, solution-processable, organic nanoporous materials. Chem. Commun. (2004). https://doi.org/10.1039/B311764B10.1039/B311764B ↗
3. L.M. Robeson, The upper bound revisited. J. Membr. Sci. 320, 390–400 (2008). https://doi.org/10.1016/j.memsci.2008.04.03010.1016/j.memsci.2008.04.030 ↗
4. R. Swaidan, B. Ghanem, I. Pinnau, Fine-tuned intrinsically ultramicroporous polymers redefine the permeability/selectivity upper bounds of membrane-based air and hydrogen separations. ACS Macro Lett. 4, 947–951 (2015). https://doi.org/10.1021/acsmacrolett.5b0051210.1021/acsmacrolett.5b00512 ↗
5. B. Comesaña-Gándara, J. Chen, C.G. Bezzu, M. Carta, I. Rose et al., Redefining the Robeson upper bounds for CO2/CH4 and CO2/N2 separations using a series of ultrapermeable benzotriptycene-based polymers of intrinsic microporosity. Energy Environ. Sci. 12, 2733–2740 (2019). https://doi.org/10.1039/c9ee01384a10.1039/c9ee01384a ↗
6. Y. Liu, X. Chen, T. Han, C. Wang, H. Liu et al., Rational macromolecular design and strategies to tune the microporosity for high-performance O2/N2 separation membranes. Sep. Purif. Technol. 334, 125978 (2024). https://doi.org/10.1016/j.seppur.2023.12597810.1016/j.seppur.2023.125978 ↗
7. X. Ma, K. Li, Z. Zhu, H. Dong, J. Lv et al., High-performance polymer molecular sieve membranes prepared by direct fluorination for efficient helium enrichment. J. Mater. Chem. A 9, 18313–18322 (2021). https://doi.org/10.1039/d1ta04099e10.1039/d1ta04099e ↗
8. W.F. Yong, F.Y. Li, T.-S. Chung, Y.W. Tong, Highly permeable chemically modified PIM-1/Matrimid membranes for green hydrogen purification. J. Mater. Chem. A 1, 13914–13925 (2013). https://doi.org/10.1039/C3TA13308G10.1039/C3TA13308G ↗
9. S.V. Gutiérrez-Hernández, F. Pardo, A.B. Foster, P. Gorgojo, P.M. Budd et al., Outstanding performance of PIM-1 membranes towards the separation of fluorinated refrigerant gases. J. Membr. Sci. 675, 121532 (2023). https://doi.org/10.1016/j.memsci.2023.12153210.1016/j.memsci.2023.121532 ↗
10. P.M. Budd, K.J. Msayib, C.E. Tattershall, B.S. Ghanem, K.J. Reynolds et al., Gas separation membranes from polymers of intrinsic microporosity. J. Membr. Sci. 251, 263–269 (2005). https://doi.org/10.1016/j.memsci.2005.01.00910.1016/j.memsci.2005.01.009 ↗
11. L.M. Robeson, Correlation of separation factor versus permeability for polymeric membranes. J. Membr. Sci. 62, 165–185 (1991). https://doi.org/10.1016/0376-7388(91)80060-J10.1016/0376-7388(91)80060-J ↗
12. B. Metz, O. Davidson, H. De Coninck, M. Loos, L. Meyer, IPCC special report on carbon dioxide capture and storage. Cambridge University Press (2005).
13. J.G. Wijmans, R.W. Baker, The solution-diffusion model: a review. J. Membr. Sci. 107, 1–21 (1995). https://doi.org/10.1016/0376-7388(95)00102-I10.1016/0376-7388(95)00102-I ↗
14. P.M. Budd, Sieving gases with twisty polymers. Science 375, 1354–1355 (2022). https://doi.org/10.1126/science.abm510310.1126/science.abm5103 ↗
15. N. Tien-Binh, D. Rodrigue, S. Kaliaguine, In-situ cross interface linking of PIM-1 polymer and UiO-66-NH2 for outstanding gas separation and physical aging control. J. Membr. Sci. 548, 429–438 (2018). https://doi.org/10.1016/j.memsci.2017.11.05410.1016/j.memsci.2017.11.054 ↗
16. Y. Cheng, S.R. Tavares, C.M. Doherty, Y. Ying, E. Sarnello et al., Enhanced polymer crystallinity in mixed-matrix membranes induced by metal-organic framework nanosheets for efficient CO2 capture. ACS Appl. Mater. Interfaces 10, 43095–43103 (2018). https://doi.org/10.1021/acsami.8b1638610.1021/acsami.8b16386 ↗
17. F. Almansour, M. Alberto, R.S. Bhavsar, X. Fan, P.M. Budd et al., Recovery of free volume in PIM-1 membranes through alcohol vapor treatment. Front. Chem. Sci. Eng. 15, 872–881 (2021). https://doi.org/10.1007/s11705-020-2001-210.1007/s11705-020-2001-2 ↗
18. M. Yu, A.B. Foster, C.A. Scholes, S.E. Kentish, P.M. Budd, Methanol vapor retards aging of PIM-1 thin film composite membranes in storage. ACS Macro Lett. 12, 113–117 (2023). https://doi.org/10.1021/acsmacrolett.2c0056810.1021/acsmacrolett.2c00568 ↗
19. P. Bernardo, F. Bazzarelli, F. Tasselli, G. Clarizia, C.R. Mason et al., Effect of physical aging on the gas transport and sorption in PIM-1 membranes. Polymer 113, 283–294 (2017). https://doi.org/10.1016/j.polymer.2016.10.04010.1016/j.polymer.2016.10.040 ↗
20. R. Swaidan, B. Ghanem, E. Litwiller, I. Pinnau, Physical aging, plasticization and their effects on gas permeation in “rigid” polymers of intrinsic microporosity. Macromolecules 48, 6553–6561 (2015). https://doi.org/10.1021/acs.macromol.5b0158110.1021/acs.macromol.5b01581 ↗
21. W.H. Lee, J.G. Seong, X. Hu, Y.M. Lee, Recent progress in microporous polymers from thermally rearranged polymers and polymers of intrinsic microporosity for membrane gas separation: pushing performance limits and revisiting trade-off lines. J. Polym. Sci. 58, 2450–2466 (2020). https://doi.org/10.1002/pol.2020011010.1002/pol.20200110 ↗
22. Y. Wang, B.S. Ghanem, Z. Ali, K. Hazazi, Y. Han et al., Recent progress on polymers of intrinsic microporosity and thermally modified analogue materials for membrane-based fluid separations. Small Struct. 2, 2100049 (2021). https://doi.org/10.1002/sstr.20210004910.1002/sstr.202100049 ↗
23. N.B. McKeown, Polymers of intrinsic microporosity (PIMs). Polymer 202, 122736 (2020). https://doi.org/10.1016/j.polymer.2020.12273610.1016/j.polymer.2020.122736 ↗
24. S. He, B. Zhu, S. Li, Y. Zhang, X. Jiang et al., Recent progress in PIM-1 based membranes for sustainable CO2 separations: polymer structure manipulation and mixed matrix membrane design. Sep. Purif. Technol. 284, 120277 (2022). https://doi.org/10.1016/j.seppur.2021.12027710.1016/j.seppur.2021.120277 ↗
25. P.M. Budd, A.B. Foster, Seeking synergy in membranes: blends and mixtures with polymers of intrinsic microporosity. Curr. Opin. Chem. Eng. 36, 100792 (2022). https://doi.org/10.1016/j.coche.2022.10079210.1016/j.coche.2022.100792 ↗
26. C. Astorino, E. De Nardo, S. Lettieri, G. Ferraro, C.F. Pirri et al., Advancements in gas separation for energy applications: exploring the potential of polymer membranes with intrinsic microporosity (PIM). Membranes 13, 903 (2023). https://doi.org/10.3390/membranes1312090310.3390/membranes13120903 ↗
27. M.L. Jue, R.P. Lively, PIM hybrids and derivatives: how to make a good thing better. Curr. Opin. Chem. Eng. 35, 100750 (2022). https://doi.org/10.1016/j.coche.2021.10075010.1016/j.coche.2021.100750 ↗
28. Y. Wang, X. Ma, B.S. Ghanem, F. Alghunaimi, I. Pinnau et al., Polymers of intrinsic microporosity for energy-intensive membrane-based gas separations. Mater. Today Nano 3, 69–95 (2018). https://doi.org/10.1016/j.mtnano.2018.11.00310.1016/j.mtnano.2018.11.003 ↗
29. R. Swaidan, B.S. Ghanem, E. Litwiller, I. Pinnau, Pure- and mixed-gas CO2/CH4 separation properties of PIM-1 and an amidoxime-functionalized PIM-1. J. Membr. Sci. 457, 95–102 (2014). https://doi.org/10.1016/j.memsci.2014.01.05510.1016/j.memsci.2014.01.055 ↗
30. N. Du, H.B. Park, G.P. Robertson, M.M. Dal-Cin, T. Visser et al., Polymer nanosieve membranes for CO2-capture applications. Nat. Mater. 10, 372–375 (2011). https://doi.org/10.1038/nmat298910.1038/nmat2989 ↗
31. F.Y. Li, Y. Xiao, T.S. Chung, (Neal) High-performance thermally self-cross-linked polymer of intrinsic microporosity (PIM-1) membranes for energy development. Procedia Eng. 44, 498–500 (2012). https://doi.org/10.1016/j.proeng.2012.08.46410.1016/j.proeng.2012.08.464 ↗
32. Q. Song, S. Cao, R.H. Pritchard, B. Ghalei, S.A. Al-Muhtaseb et al., Controlled thermal oxidative crosslinking of polymers of intrinsic microporosity towards tunable molecular sieve membranes. Nat. Commun. 5, 4813 (2014). https://doi.org/10.1038/ncomms581310.1038/ncomms5813 ↗
33. effect on molecular packing and gas separation performance, K. Mizrahi Rodriguez, A.X. Wu, Q. Qian, G. Han, S. Lin et al., Facile and time-efficient carboxylic acid functionalization of PIM-1. Macromolecules 53, 6220–6234 (2020). https://doi.org/10.1021/acs.macromol.0c0093310.1021/acs.macromol.0c00933 ↗
34. M. Hu, J. Liu, J. Kong, P. Jia, N. Qi et al., Free volume and gas transport properties of hydrolyzed polymer of intrinsic microporosity (PIM-1) membrane studied by positron annihilation spectroscopy. Microporous Mesoporous Mater. 335, 111770 (2022). https://doi.org/10.1016/j.micromeso.2022.11177010.1016/j.micromeso.2022.111770 ↗
35. N. Du, G.P. Robertson, J. Song, I. Pinnau, M.D. Guiver, High-performance carboxylated polymers of intrinsic microporosity (PIMs) with tunable gas transport properties. Macromolecules 42, 6038–6043 (2009). https://doi.org/10.1021/ma900901710.1021/ma9009017 ↗
36. J.W. Jeon, D.-G. Kim, E.-H. Sohn, Y. Yoo, Y.S. Kim et al., Highly carboxylate-functionalized polymers of intrinsic microporosity for CO2-selective polymer membranes. Macromolecules 50, 8019–8027 (2017). https://doi.org/10.1021/acs.macromol.7b0133210.1021/acs.macromol.7b01332 ↗
37. C.R. Mason, L. Maynard-Atem, N.M. Al-Harbi, P.M. Budd, P. Bernardo et al., Polymer of intrinsic microporosity incorporating thioamide functionality: preparation and gas transport properties. Macromolecules 44, 6471–6479 (2011). https://doi.org/10.1021/ma200918h10.1021/ma200918h ↗
38. K. Mizrahi Rodriguez, F.M. Benedetti, N. Roy, A.X. Wu, Z.P. Smith, Sorption-enhanced mixed-gas transport in amine functionalized polymers of intrinsic microporosity (PIMs). J. Mater. Chem. A 9, 23631–23642 (2021). https://doi.org/10.1039/d1ta06530k10.1039/d1ta06530k ↗
39. N. Du, G.P. Robertson, M.M. Dal-Cin, L. Scoles, M.D. Guiver, Polymers of intrinsic microporosity (PIMs) substituted with methyl tetrazole. Polymer 53, 4367–4372 (2012). https://doi.org/10.1016/j.polymer.2012.07.05510.1016/j.polymer.2012.07.055 ↗
40. Z. Wang, Q. Shen, J. Liang, Y. Zhang, J. Jin, Adamantane-grafted polymer of intrinsic microporosity with finely tuned interchain spacing for improved CO2 separation performance. Sep. Purif. Technol. 233, 116008 (2020). https://doi.org/10.1016/j.seppur.2019.11600810.1016/j.seppur.2019.116008 ↗
41. S. Kang, G. Huo, Z. Zhang, T. Guo, Z. Dai et al., Polymers of intrinisic porosity with bulky side groups on the spirobisindane moieties for gas separation. ACS Appl. Polym. Mater. 5, 8660–8669 (2023). https://doi.org/10.1021/acsapm.3c0176210.1021/acsapm.3c01762 ↗
42. K. Halder, S. Neumann, G. Bengtson, M.M. Khan, V. Filiz et al., Polymers of intrinsic microporosity postmodified by vinyl groups for membrane applications. Macromolecules 51, 7309–7319 (2018). https://doi.org/10.1021/acs.macromol.8b0125210.1021/acs.macromol.8b01252 ↗
43. J. Zhang, H. Kang, J. Martin, S. Zhang, S. Thomas et al., The enhancement of chain rigidity and gas transport performance of polymers of intrinsic microporosity via intramolecular locking of the spiro-carbon. Chem. Commun. 52, 6553–6556 (2016). https://doi.org/10.1039/c6cc02308h10.1039/c6cc02308h ↗
44. M. Liu, X. Lu, M.D. Nothling, C.M. Doherty, L. Zu et al., Physical aging investigations of a spirobisindane-locked polymer of intrinsic microporosity. ACS Mater. Lett. 2, 993–998 (2020). https://doi.org/10.1021/acsmaterialslett.0c0018410.1021/acsmaterialslett.0c00184 ↗
45. A.B. Foster, M. Tamaddondar, J.M. Luque-Alled, W.J. Harrison, Z. Li et al., Understanding the topology of the polymer of intrinsic microporosity PIM-1: cyclics, tadpoles, and network structures and their impact on membrane performance. Macromolecules 53, 569–583 (2020). https://doi.org/10.1021/acs.macromol.9b0218510.1021/acs.macromol.9b02185 ↗
46. A.B. Foster, J.L. Beal, M. Tamaddondar, J.M. Luque-Alled, B. Robertson et al., Importance of small loops within PIM-1 topology on gas separation selectivity in thin film composite membranes. J. Mater. Chem. A 9, 21807–21823 (2021). https://doi.org/10.1039/D1TA03712A10.1039/D1TA03712A ↗
47. K. Mizrahi Rodriguez, S. Lin, A.X. Wu, G. Han, J.J. Teesdale et al., Leveraging free volume manipulation to improve the membrane separation performance of amine-functionalized PIM-1. Angew. Chem. Int. Ed. 60, 6593–6599 (2021). https://doi.org/10.1002/anie.20201244110.1002/anie.202012441 ↗
48. H. Dong, Z. Zhu, K. Li, Q. Li, W. Ji et al., Significantly improved gas separation properties of sulfonated PIM-1 by direct sulfonation using SO3 solution. J. Membr. Sci. 635, 119440 (2021). https://doi.org/10.1016/j.memsci.2021.11944010.1016/j.memsci.2021.119440 ↗
49. L. Chen, P. Su, J. Liu, S. Chen, J. Huang et al., Post-synthesis amination of polymer of intrinsic microporosity membranes for CO2 separation. AICHE J. 69, e18050 (2023). https://doi.org/10.1002/aic.1805010.1002/aic.18050 ↗
50. J. Guan, X. Wang, J. Du, Q. Liang, W. He et al., Surface-engineered PIM-1 membranes for facile CO2 capture. Chem. Eng. J. 477, 147017 (2023). https://doi.org/10.1016/j.cej.2023.14701710.1016/j.cej.2023.147017 ↗
51. N. Du, M.M. Cin, I. Pinnau, A. Nicalek, G.P. Robertson et al., Azide-based cross-linking of polymers of intrinsic microporosity (PIMs) for condensable gas separation. Macromol. Rapid Commun. 32, 631–636 (2011). https://doi.org/10.1002/marc.20100077510.1002/marc.201000775 ↗
52. S. Zhou, Y. Sun, B. Xue, S. Li, J. Zheng et al., Controlled superacid-catalyzed self-cross-linked polymer of intrinsic microporosity for high-performance CO2 separation. Macromolecules 53, 7988–7996 (2020). https://doi.org/10.1021/acs.macromol.0c0159010.1021/acs.macromol.0c01590 ↗
53. N. Du, M.M. Dal-Cin, G.P. Robertson, M.D. Guiver, Decarboxylation-induced cross-linking of polymers of intrinsic microporosity (PIMs) for membrane gas separation. Macromolecules 45, 5134–5139 (2012). https://doi.org/10.1021/ma300751s10.1021/ma300751s ↗
54. Y. Sun, J. Zhang, H. Li, F. Fan, Q. Zhao et al., Ester-crosslinked polymers of intrinsic microporosity membranes with enhanced plasticization resistance for CO2 separation. Sep. Purif. Technol. 314, 123623 (2023). https://doi.org/10.1016/j.seppur.2023.12362310.1016/j.seppur.2023.123623 ↗
55. X. Chen, Z. Zhang, L. Wu, X. Liu, S. Xu et al., Polymers of intrinsic microporosity having bulky substitutes and cross-linking for gas separation membranes. ACS Appl. Polym. Mater. 2, 987–995 (2020). https://doi.org/10.1021/acsapm.9b0119310.1021/acsapm.9b01193 ↗
56. H. Zhao, Q. Xie, X. Ding, J. Chen, M. Hua et al., High performance post-modified polymers of intrinsic microporosity (PIM-1) membranes based on multivalent metal ions for gas separation. J. Membr. Sci. 514, 305–312 (2016). https://doi.org/10.1016/j.memsci.2016.05.01310.1016/j.memsci.2016.05.013 ↗
57. K.-S. Liao, J.-Y. Lai, T.-S. Chung, Metal ion modified PIM-1 and its application for propylene/propane separation. J. Membr. Sci. 515, 36–44 (2016). https://doi.org/10.1016/j.memsci.2016.05.03210.1016/j.memsci.2016.05.032 ↗
58. Y. Sun, X. Wang, X. Li, W. Xiao, Y. Dai et al., Recent developments of anti-plasticized membranes for aggressive CO2 separation. Green Chem. Eng. 4, 1–16 (2023). https://doi.org/10.1016/j.gce.2022.09.00110.1016/j.gce.2022.09.001 ↗
59. O. Salinas, X. Ma, E. Litwiller, I. Pinnau, Ethylene/ethane permeation, diffusion and gas sorption properties of carbon molecular sieve membranes derived from the prototype ladder polymer of intrinsic microporosity (PIM-1). J. Membr. Sci. 504, 133–140 (2016). https://doi.org/10.1016/j.memsci.2015.12.05210.1016/j.memsci.2015.12.052 ↗
60. M.L. Jue, Y. Ma, R.P. Lively, Streamlined fabrication of asymmetric carbon molecular sieve hollow fiber membranes. ACS Appl. Polym. Mater. 1, 1960–1964 (2019). https://doi.org/10.1021/acsapm.9b0056710.1021/acsapm.9b00567 ↗
61. K.-S. Liao, S. Japip, J.-Y. Lai, T.-S. Chung, Boron-embedded hydrolyzed PIM-1 carbon membranes for synergistic ethylene/ethane purification. J. Membr. Sci. 534, 92–99 (2017). https://doi.org/10.1016/j.memsci.2017.04.01710.1016/j.memsci.2017.04.017 ↗
62. J. Liu, Y. Xiao, T.-S. Chung, Flexible thermally treated 3D PIM-CD molecular sieve membranes exceeding the upper bound line for propylene/propane separation. J. Mater. Chem. A 5, 4583–4595 (2017). https://doi.org/10.1039/C6TA09751K10.1039/C6TA09751K ↗
63. Y. Ma, F. Zhang, S. Yang, R.P. Lively, Evidence for entropic diffusion selection of xylene isomers in carbon molecular sieve membranes. J. Membr. Sci. 564, 404–414 (2018). https://doi.org/10.1016/j.memsci.2018.07.04010.1016/j.memsci.2018.07.040 ↗
64. Y. Ma, M.L. Jue, F. Zhang, R. Mathias, H.Y. Jang et al., Creation of well-defined “mid-sized” micropores in carbon molecular sieve membranes. Angew. Chem. Int. Ed. 58, 13259–13265 (2019). https://doi.org/10.1002/anie.20190310510.1002/anie.201903105 ↗
65. S. He, X. Jiang, S. Li, F. Ran, J. Long et al., Intermediate thermal manipulation of polymers of intrinsic microporous (PIMs) membranes for gas separations. AICHE J. 66, e16543 (2020). https://doi.org/10.1002/aic.1654310.1002/aic.16543 ↗
66. Q. Song, S. Cao, P. Zavala-Rivera, L.P. Lu, W. Li et al., Photo-oxidative enhancement of polymeric molecular sieve membranes. Nat. Commun. 4, 1918 (2013). https://doi.org/10.1038/ncomms294210.1038/ncomms2942 ↗
67. F.Y. Li, Y. Xiao, Y.K. Ong, T.-S. Chung, UV-rearranged PIM-1 polymeric membranes for advanced hydrogen purification and production. Adv. Energy Mater. 2, 1456–1466 (2012). https://doi.org/10.1002/aenm.20120029610.1002/aenm.201200296 ↗
68. R. Hou, S.J.D. Smith, K. Konstas, C.M. Doherty, C.D. Easton et al., Synergistically improved PIM-1 membrane gas separation performance by PAF-1 incorporation and UV irradiation. J. Mater. Chem. A 10, 10107–10119 (2022). https://doi.org/10.1039/D2TA00138A10.1039/D2TA00138A ↗
69. W. Ji, H. Geng, Z. Chen, H. Dong, H. Matsuyama et al., Facile tailoring molecular sieving effect of PIM-1 by in situ O3 treatment for high performance hydrogen separation. J. Membr. Sci. 662, 120971 (2022). https://doi.org/10.1016/j.memsci.2022.12097110.1016/j.memsci.2022.120971 ↗
70. X. Niu, G. Dong, D. Li, Y. Zhang, Y. Zhang, Atomic layer deposition modified PIM-1 membranes for improved CO2 separation: a comparative study on the microstructure-performance relationships. J. Membr. Sci. 664, 121103 (2022). https://doi.org/10.1016/j.memsci.2022.12110310.1016/j.memsci.2022.121103 ↗
71. X. Chen, L. Wu, H. Yang, Y. Qin, X. Ma et al., Tailoring the microporosity of polymers of intrinsic microporosity for advanced gas separation by atomic layer deposition. Angew. Chem. Int. Ed. 60, 17875–17880 (2021). https://doi.org/10.1002/anie.20201690110.1002/anie.202016901 ↗
72. Z. Gao, Y. Wang, H. Wu, Y. Ren, Z. Guo et al., Surface functionalization of Polymers of Intrinsic Microporosity (PIMs) membrane by polyphenol for efficient CO2 separation. Green Chem. Eng. 2, 70–76 (2021). https://doi.org/10.1016/j.gce.2020.12.00310.1016/j.gce.2020.12.003 ↗
73. J. Ahn, W.-J. Chung, I. Pinnau, J. Song, N. Du et al., Gas transport behavior of mixed-matrix membranes composed of silica nanoparticles in a polymer of intrinsic microporosity (PIM-1). J. Membr. Sci. 346, 280–287 (2010). https://doi.org/10.1016/j.memsci.2009.09.04710.1016/j.memsci.2009.09.047 ↗
74. G. Dong, J. Zhang, Z. Wang, J. Wang, P. Zhao et al., Interfacial property modulation of PIM-1 through polydopamine-derived submicrospheres for enhanced CO2/N2 separation performance. ACS Appl. Mater. Interfaces 11, 19613–19622 (2019). https://doi.org/10.1021/acsami.9b0228110.1021/acsami.9b02281 ↗
75. S. Mohsenpour, Z. Guo, F. Almansour, S.M. Holmes, P.M. Budd et al., Porous silica nanosheets in PIM-1 membranes for CO2 separation. J. Membr. Sci. 661, 120889 (2022). https://doi.org/10.1016/j.memsci.2022.12088910.1016/j.memsci.2022.120889 ↗
76. N. Sakaguchi, M. Tanaka, M. Yamato, H. Kawakami, Superhigh CO2-permeable mixed matrix membranes composed of a polymer of intrinsic microporosity (PIM-1) and surface-modified silica nanoparticles. ACS Appl. Polym. Mater. 1, 2516–2524 (2019). https://doi.org/10.1021/acsapm.9b0062410.1021/acsapm.9b00624 ↗
77. J.M. Luque-Alled, M. Tamaddondar, A.B. Foster, P.M. Budd, P. Gorgojo, PIM-1/holey graphene oxide mixed matrix membranes for gas separation: unveiling the role of holes. ACS Appl. Mater. Interfaces 13, 55517–55533 (2021). https://doi.org/10.1021/acsami.1c1564010.1021/acsami.1c15640 ↗
78. M. Alberto, R. Bhavsar, J.M. Luque-Alled, A. Vijayaraghavan, P.M. Budd et al., Impeded physical aging in PIM-1 membranes containing graphene-like fillers. J. Membr. Sci. 563, 513–520 (2018). https://doi.org/10.1016/j.memsci.2018.06.02610.1016/j.memsci.2018.06.026 ↗
79. F. Almansour, M. Alberto, A.B. Foster, S. Mohsenpour, P.M. Budd et al., Thin film nanocomposite membranes of superglassy PIM-1 and amine-functionalised 2D fillers for gas separation. J. Mater. Chem. A 10, 23341–23351 (2022). https://doi.org/10.1039/D2TA06339E10.1039/D2TA06339E ↗
80. S. Mohsenpour, A.W. Ameen, S. Leaper, C. Skuse, F. Almansour et al., PIM-1 membranes containing POSS - graphene oxide for CO2 separation. Sep. Purif. Technol. 298, 121447 (2022). https://doi.org/10.1016/j.seppur.2022.12144710.1016/j.seppur.2022.121447 ↗
81. J.M. Luque-Alled, A.W. Ameen, M. Alberto, M. Tamaddondar, A.B. Foster et al., Gas separation performance of MMMs containing (PIM-1)-functionalized GO derivatives. J. Membr. Sci. 623, 118902 (2021). https://doi.org/10.1016/j.memsci.2020.11890210.1016/j.memsci.2020.118902 ↗
82. Z. Tian, S. Wang, Y. Wang, X. Ma, K. Cao et al., Enhanced gas separation performance of mixed matrix membranes from graphitic carbon nitride nanosheets and polymers of intrinsic microporosity. J. Membr. Sci. 514, 15–24 (2016). https://doi.org/10.1016/j.memsci.2016.04.01910.1016/j.memsci.2016.04.019 ↗
83. B.K. Voon, H. Shen Lau, C.Z. Liang, W.F. Yong, Functionalized two-dimensional g-C3N4 nanosheets in PIM-1 mixed matrix membranes for gas separation. Sep. Purif. Technol. 296, 121354 (2022). https://doi.org/10.1016/j.seppur.2022.12135410.1016/j.seppur.2022.121354 ↗
84. Z. Tian, D. Li, W. Zheng, Q. Chang, Y. Sang et al., Heteroatom-doped noble carbon-tailored mixed matrix membranes with ultrapermeability for efficient CO2 separation. Mater. Horiz. 10, 3660–3667 (2023). https://doi.org/10.1039/d3mh00463e10.1039/d3mh00463e ↗
85. K. Wang, D. Chen, J. Tang, Z. Hong, Z. Zhu et al., PIM-1-based membranes mediated with CO2-philic MXene nanosheets for superior CO2/N2 separation. Chem. Eng. J. 483, 149305 (2024). https://doi.org/10.1016/j.cej.2024.14930510.1016/j.cej.2024.149305 ↗
86. W. Han, C. Zhang, M. Zhao, F. Yang, Y. Yang et al., Post-modification of PIM-1 and simultaneously in situ synthesis of porous polymer networks into PIM-1 matrix to enhance CO2 separation performance. J. Membr. Sci. 636, 119544 (2021). https://doi.org/10.1016/j.memsci.2021.11954410.1016/j.memsci.2021.119544 ↗
87. C. Wang, F. Guo, H. Li, J. Xu, J. Hu et al., Porous organic polymer as fillers for fabrication of defect-free PIM-1 based mixed matrix membranes with facilitating CO2-transfer chain. J. Membr. Sci. 564, 115–122 (2018). https://doi.org/10.1016/j.memsci.2018.07.01810.1016/j.memsci.2018.07.018 ↗
88. A.K. Sekizkardes, V.A. Kusuma, G. Dahe, E.A. Roth, L.J. Hill et al., Separation of carbon dioxide from flue gas by mixed matrix membranes using dual phase microporous polymeric constituents. Chem. Commun. 52, 11768–11771 (2016). https://doi.org/10.1039/C6CC04811K10.1039/C6CC04811K ↗
89. G. Yu, Y. Li, Z. Wang, T.X. Liu, G. Zhu et al., Mixed matrix membranes derived from nanoscale porous organic frameworks for permeable and selective CO2 separation. J. Membr. Sci. 591, 117343 (2019). https://doi.org/10.1016/j.memsci.2019.11734310.1016/j.memsci.2019.117343 ↗
90. C.H. Lau, P.T. Nguyen, M.R. Hill, A.W. Thornton, K. Konstas et al., Ending aging in super glassy polymer membranes. Angew. Chem. Int. Ed. 53, 5322–5326 (2014). https://doi.org/10.1002/anie.20140223410.1002/anie.201402234 ↗
91. C.H. Lau, K. Konstas, A.W. Thornton, A.C. Liu, S. Mudie et al., Gas-separation membranes loaded with porous aromatic frameworks that improve with age. Angew. Chem. Int. Ed. 54, 2669–2673 (2015). https://doi.org/10.1002/anie.20141068410.1002/anie.201410684 ↗
92. A.F. Bushell, P.M. Budd, M.P. Attfield, J.T.A. Jones, T. Hasell et al., Nanoporous organic polymer/cage composite membranes. Angew. Chem. Int. Ed. 52, 1253–1256 (2013). https://doi.org/10.1002/anie.20120633910.1002/anie.201206339 ↗
93. J. Liu, Y. Xiao, K.-S. Liao, T.-S. Chung, Highly permeable and aging resistant 3D architecture from polymers of intrinsic microporosity incorporated with beta-cyclodextrin. J. Membr. Sci. 523, 92–102 (2017). https://doi.org/10.1016/j.memsci.2016.10.00110.1016/j.memsci.2016.10.001 ↗
94. T. Mitra, R.S. Bhavsar, D.J. Adams, P.M. Budd, A.I. Cooper, PIM-1 mixed matrix membranes for gas separations using cost-effective hypercrosslinked nanoparticle fillers. Chem. Commun. 52, 5581–5584 (2016). https://doi.org/10.1039/c6cc00261g10.1039/c6cc00261g ↗
95. R. Hou, S.J.D. Smith, C.D. Wood, R.J. Mulder, C.H. Lau et al., Solvation effects on the permeation and aging performance of PIM-1-based MMMs for gas separation. ACS Appl. Mater. Interfaces 11, 6502–6511 (2019). https://doi.org/10.1021/acsami.8b1920710.1021/acsami.8b19207 ↗
96. M.M. Khan, S. Shishatskiy, V. Filiz, Mixed matrix membranes of boron icosahedron and polymers of intrinsic microporosity (PIM-1) for gas separation. Membranes 8, 1 (2018). https://doi.org/10.3390/membranes801000110.3390/membranes8010001 ↗
97. W.F. Yong, K.H.A. Kwek, K.-S. Liao, T.-S. Chung, Suppression of aging and plasticization in highly permeable polymers. Polymer 77, 377–386 (2015). https://doi.org/10.1016/j.polymer.2015.09.07510.1016/j.polymer.2015.09.075 ↗
98. L. Yang, Z. Tian, X. Zhang, X. Wu, Y. Wu et al., Enhanced CO2 selectivities by incorporating CO2-philic PEG-POSS into polymers of intrinsic microporosity membrane. J. Membr. Sci. 543, 69–78 (2017). https://doi.org/10.1016/j.memsci.2017.08.05010.1016/j.memsci.2017.08.050 ↗
99. N. Konnertz, Y. Ding, W.J. Harrison, P.M. Budd, A. Schönhals et al., Molecular mobility and gas transport properties of nanocomposites based on PIM-1 and polyhedral oligomeric phenethyl-silsesquioxanes (POSS). J. Membr. Sci. 529, 274–285 (2017). https://doi.org/10.1016/j.memsci.2017.02.00710.1016/j.memsci.2017.02.007 ↗
100. Y. Kinoshita, K. Wakimoto, A.H. Gibbons, A.P. Isfahani, H. Kusuda et al., Enhanced PIM-1 membrane gas separation selectivity through efficient dispersion of functionalized POSS fillers. J. Membr. Sci. 539, 178–186 (2017). https://doi.org/10.1016/j.memsci.2017.05.07210.1016/j.memsci.2017.05.072 ↗