journal article·2025-12Open access

Revealing the Oxygen Transport Challenges in Catalyst Layers in Proton Exchange Membrane Fuel Cells and Water Electrolysis

Huiyuan Li, Shu Yuan, Jiabin You, Congfan Zhao, Xiaojing Cheng, Liuxuan Luo, Xiaohui Yan, Shuiyun Shen, Junliang Zhang

Nano-Micro Letters· Volume 17· Issue 1

Abstract

Abstract Urgent requirements of the renewable energy boost the development of stable and clean hydrogen, which could effectively displace fossil fuels in mitigating climate changes. The efficient interconversion of hydrogen and electronic is highly based on polymer electrolyte membrane fuel cells (PEMFCs) and water electrolysis (PEMWEs). However, the high cost continues to impede large-scale commercialization of both PEMFC and PEMWE technologies, with the expense primarily attributed to noble catalysts serving as a major bottleneck. The reduction of Pt loading in PEMFCs is essential but limited by the oxygen transport resistance in the cathode catalyst layers (CCLs), while the oxygen transport in anode catalyst layers (ACLs) in PEMWEs also being focused as the Ir/IrO x catalyst reduced. The pore structure and the catalyst–ionomer agglomerates play important roles in the oxygen transport process of both PEMFCs and PEMWEs due to the similarity of membrane electrode assembly (MEA). Herein, the oxygen transport mechanism of PEMFCs in pore structure and ionomer thin films in CCLs is systematically reviewed, while state-of-the-art strategies are presented for enhancing oxygen transport and performance through materials and structural design. The deeply research opens avenues for exploring similar key scientific problems in oxygen transport process of PEMWEs and their further development.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. V.L. Bondarenko, D.N. Ilyinskaya, A.A. Kazakova, P.S. Kozlovtsev, N.A. Lavrov et al., Introduction to hydrogen energy. Chem. Petrol. Eng. 57(11), 1008–1014 (2022). https://doi.org/10.1007/s10556-022-01038-810.1007/s10556-022-01038-8 ↗
2. R. Rath, P. Kumar, S. Mohanty, N. Sk, Recent advances, unsolved deficiencies, and future perspectives of hydrogen fuel cells in transportation and portable sectors. Int. J. Energy Res. 43(15), 8931–8955 (2019). https://doi.org/10.1002/er.479510.1002/er.4795 ↗
3. A. Sajid, E. Pervaiz, H. Ali, T. Noor, B. Mm, A perspective on development of fuel cell materials: Electrodes and electrolyte. Int. J. Energy Res. 46(6), 6953–6988 (2022). https://doi.org/10.1002/er.763510.1002/er.7635 ↗
4. L. Fan, H. Deng, Y. Zhang, Q. Du, D.Y.C. Leung et al., Towards ultralow platinum loading proton exchange membrane fuel cells. Energy Environ. Sci. 16(4), 1466–1479 (2023). https://doi.org/10.1039/D2EE03169H10.1039/D2EE03169H ↗
5. M. Carmo, D.L. Fritz, J. Mergel, D. Stolten, A comprehensive review on PEM water electrolysis. Int. J. Hydrog. Energy 38(12), 4901–4934 (2013). https://doi.org/10.1016/j.ijhydene.2013.01.15110.1016/j.ijhydene.2013.01.151 ↗
6. Y. Wang, Y. Pang, H. Xu, A. Martinez, K.S. Chen, PEM Fuel cell and electrolysis cell technologies and hydrogen infrastructure development–a review. Energy Environ. Sci. 15(6), 2288–2328 (2022). https://doi.org/10.1039/D2EE00790H10.1039/D2EE00790H ↗
7. H. Lee, Recent developments in fuel cells and water electrolyzers. JACS Au 4(5), 1673–1675 (2024). https://doi.org/10.1021/jacsau.4c0038710.1021/jacsau.4c00387 ↗
8. X. Peng, Z. Taie, J. Liu, Y. Zhang, X. Peng et al., Hierarchical electrode design of highly efficient and stable unitized regenerative fuel cells (URFCs) for long-term energy storage. Energy Environ. Sci. 13(12), 4872–4881 (2020). https://doi.org/10.1039/D0EE03244A10.1039/D0EE03244A ↗
9. USDOE, Hydrogen and Fuel Cell Technologies Office Multi-Year Research, Development, and Demonstration Plan: 2025 FUEL CELLS SECTION [Online]. (2025), https://www.energy.gov/eere/fuelcells/hydrogen-and-fuel-cell-technologies-office
10. P. Rao, Y. Yu, S. Wang, Y. Zhou, X. Wu et al., Understanding the improvement mechanism of plasma etching treatment on oxygen reduction reaction catalysts. Exploration 4(1), 20230034 (2023). https://doi.org/10.1002/EXP.2023003410.1002/EXP.20230034 ↗
11. Z. Li, W. Niu, Z. Yang, N. Zaman, W. Samarakoon et al., Stabilizing atomic Pt with trapped interstitial F in alloyed PtCo nanosheets for high-performance zinc-air batteries. Energy Environ. Sci. 13(3), 884–895 (2020). https://doi.org/10.1039/C9EE02657F10.1039/C9EE02657F ↗
12. D. Wu, X. Shen, Y. Pan, L. Yao, Z. Peng, Platinum alloy catalysts for oxygen reduction reaction: advances, challenges and perspectives. ChemNanoMat 6(1), 32–41 (2020). https://doi.org/10.1002/cnma.20190031910.1002/cnma.201900319 ↗
13. J.P. Masnica, S. Sibt-e-Hassan, S. Potgieter-Vermaak, Y.N. Regmi, L.A. King et al., ZIF-8-derived Fe-C catalysts: relationship between structure and catalytic activity toward the oxygen reduction reaction. Green Carbon 1(2), 160–169 (2023). https://doi.org/10.1016/j.greenca.2023.11.00110.1016/j.greenca.2023.11.001 ↗
14. J. Li, S. Sharma, X. Liu, Y.-T. Pan, J.S. Spendelow et al., Hard-magnet L10-CoPt nanoparticles advance fuel cell catalysis. Joule 3(1), 124–135 (2019). https://doi.org/10.1016/j.joule.2018.09.01610.1016/j.joule.2018.09.016 ↗
15. X. Zhao, H. Cheng, L. Song, L. Han, R. Zhang et al., Rhombohedral ordered intermetallic nanocatalyst boosts the oxygen reduction reaction. ACS Catal. 11(1), 184–192 (2021). https://doi.org/10.1021/acscatal.0c0402110.1021/acscatal.0c04021 ↗
16. E. Lee, K.A. Kuttiyiel, K.-H. Kim, J. Jang, H.J. Lee et al., High pressure nitrogen-infused ultrastable fuel cell catalyst for oxygen reduction reaction. ACS Catal. 11(9), 5525–5531 (2021). https://doi.org/10.1021/acscatal.1c0039510.1021/acscatal.1c00395 ↗
17. X. Zhao, K. Sasaki, Advanced Pt-based core-shell electrocatalysts for fuel cell cathodes. Acc. Chem. Res. 55(9), 1226–1236 (2022). https://doi.org/10.1021/acs.accounts.2c0005710.1021/acs.accounts.2c00057 ↗
18. USDOE. Multi-Year Research, Development, and Demonstration Plan: 2016 FUEL CELLS SECTION [Online]. (2016), https://www.energy
19. J. Fan, M. Chen, Z. Zhao, Z. Zhang, S. Ye et al., Bridging the gap between highly active oxygen reduction reaction catalysts and effective catalyst layers for proton exchange membrane fuel cells. Nat. Energy 6(5), 475–486 (2021). https://doi.org/10.1038/s41560-021-00824-710.1038/s41560-021-00824-7 ↗
20. S.J. Peighambardoust, S. Rowshanzamir, M. Amjadi, Review of the proton exchange membranes for fuel cell applications. Int. J. Hydrog. Energy 35(17), 9349–9384 (2010). https://doi.org/10.1016/j.ijhydene.2010.05.01710.1016/j.ijhydene.2010.05.017 ↗
21. R. Kucernak, E. Toyoda, Studying the oxygen reduction and hydrogen oxidation reactions under realistic fuel cell conditions. Electrochem. Commun. 10(11), 1728–1731 (2008). https://doi.org/10.1016/j.elecom.2008.09.00110.1016/j.elecom.2008.09.001 ↗
22. A.Z. Weber, A. Kusoglu, Unexplained transport resistances for low-loaded fuel-cell catalyst layers. J. Mater. Chem. A 2(41), 17207–17211 (2014). https://doi.org/10.1039/C4TA02952F10.1039/C4TA02952F ↗
23. A. Kongkanand, M.F. Mathias, The priority and challenge of high-power performance of low-platinum proton-exchange membrane fuel cells. J. Phys. Chem. Lett. 7(7), 1127–1137 (2016). https://doi.org/10.1021/acs.jpclett.6b0021610.1021/acs.jpclett.6b00216 ↗
24. J. Durst, C. Simon, F. Hasché, H.A. Gasteiger, Hydrogen oxidation and evolution reaction kinetics on carbon supported Pt, Ir, Rh, and Pd electrocatalysts in acidic media. J. Electrochem. Soc. 162(1), F190–F203 (2015). https://doi.org/10.1149/2.0981501jes10.1149/2.0981501jes ↗
25. K.E. Ayers, J.N. Renner, N. Danilovic, J.X. Wang, Y. Zhang et al., Pathways to ultra-low platinum group metal catalyst loading in proton exchange membrane electrolyzers. Catal. Today 262, 121–132 (2016). https://doi.org/10.1016/j.cattod.2015.10.01910.1016/j.cattod.2015.10.019 ↗
26. L. Peng, Z. Wei, Catalyst engineering for electrochemical energy conversion from water to water: water electrolysis and the hydrogen fuel cell. Engineering 6(6), 653–679 (2020). https://doi.org/10.1016/j.eng.2019.07.02810.1016/j.eng.2019.07.028 ↗
27. M. Bernt, A. Hartig-Weiß, M.F. Tovini, H.A. El-Sayed, C. Schramm et al., Current challenges in catalyst development for PEM water electrolyzers. Chem. Ing. Tech. 92(1–2), 31–39 (2020). https://doi.org/10.1002/cite.20190010110.1002/cite.201900101 ↗
28. K. Ehelebe, J. Knöppel, M. Bierling, B. Mayerhöfer, T. Böhm et al., Platinum dissolution in realistic fuel cell catalyst layers. Angew. Chem. Int. Ed. 60(16), 8882–8888 (2021). https://doi.org/10.1002/anie.20201471110.1002/anie.202014711 ↗
29. L. Qu, Z. Wang, X. Guo, W. Song, F. Xie et al., Effect of electrode Pt-loading and cathode flow-field plate type on the degradation of PEMFC. J. Energy Chem. 35, 95–103 (2019). https://doi.org/10.1016/j.jechem.2018.09.00410.1016/j.jechem.2018.09.004 ↗
30. S. Shahgaldi, I. Alaefour, X. Li, The impact of short side chain ionomer on polymer electrolyte membrane fuel cell performance and durability. Appl. Energy 217, 295–302 (2018). https://doi.org/10.1016/j.apenergy.2018.02.15410.1016/j.apenergy.2018.02.154 ↗
31. S.M. Alia, B. Rasimick, C. Ngo, K.C. Neyerlin, S.S. Kocha et al., Activity and durability of iridium nanoparticles in the oxygen evolution reaction. J. Electrochem. Soc. 163(11), F3105–F3112 (2016). https://doi.org/10.1149/2.0151611jes10.1149/2.0151611jes ↗
32. Y. Fukuyama, T. Shiomi, T. Kotaka, Y. Tabuchi, The impact of platinum reduction on oxygen transport in proton exchange membrane fuel cells. Electrochim. Acta 117, 367–378 (2014). https://doi.org/10.1016/j.electacta.2013.11.17910.1016/j.electacta.2013.11.179 ↗
33. T.A. Greszler, D. Caulk, P. Sinha, The impact of platinum loading on oxygen transport resistance. J. Electrochem. Soc. 159(12), F831–F840 (2012). https://doi.org/10.1149/2.061212jes10.1149/2.061212jes ↗
34. C. Wang, X. Cheng, J. Lu, S. Shen, X. Yan et al., The experimental measurement of local and bulk oxygen transport resistances in the catalyst layer of proton exchange membrane fuel cells. J. Phys. Chem. Lett. 8(23), 5848–5852 (2017). https://doi.org/10.1021/acs.jpclett.7b0258010.1021/acs.jpclett.7b02580 ↗
35. Y. Ono, A. Ohma, K. Shinohara, K. Fushinobu, Influence of equivalent weight of ionomer on local oxygen transport resistance in cathode catalyst layers. J. Electrochem. Soc. 160(8), F779–F787 (2013). https://doi.org/10.1149/2.040308jes10.1149/2.040308jes ↗
36. D.R. Baker, C. Wieser, K.C. Neyerlin, M.W. Murphy, The use of limiting current to determine transport resistance in PEM fuel cells. ECS Trans. 3(1), 989–999 (2006). https://doi.org/10.1149/1.235621810.1149/1.2356218 ↗
37. D.R. Baker, D.A. Caulk, K.C. Neyerlin, M.W. Murphy, Measurement of oxygen transport resistance in PEM fuel cells by limiting current methods. J. Electrochem. Soc. 156(9), B991 (2009). https://doi.org/10.1149/1.315222610.1149/1.3152226 ↗
38. T. Mashio, A. Ohma, S. Yamamoto, K. Shinohara, Analysis of reactant gas transport in a catalyst layer. ECS Trans. 11(1), 529–540 (2007). https://doi.org/10.1149/1.278096610.1149/1.2780966 ↗
39. Z. Yu, R.N. Carter, J. Zhang, Measurements of pore size distribution, porosity, effective oxygen diffusivity, and tortuosity of PEM fuel cell electrodes. Fuel Cells 12(4), 557–565 (2012). https://doi.org/10.1002/fuce.20120001710.1002/fuce.201200017 ↗
40. N. Nonoyama, S. Okazaki, A.Z. Weber, Y. Ikogi, T. Yoshida, Analysis of oxygen-transport diffusion resistance in proton-exchange-membrane fuel cells. J. Electrochem. Soc. 158(4), B416 (2011). https://doi.org/10.1149/1.354603810.1149/1.3546038 ↗
41. S. Ott, A. Orfanidi, H. Schmies, B. Anke, H.N. Nong et al., Ionomer distribution control in porous carbon-supported catalyst layers for high-power and low Pt-loaded proton exchange membrane fuel cells. Nat. Mater. 19(1), 77–85 (2020). https://doi.org/10.1038/s41563-019-0487-010.1038/s41563-019-0487-0 ↗
42. C. Lee, W.J.M. Kort-Kamp, H. Yu, D.A. Cullen, B.M. Patterson et al., Grooved electrodes for high-power-density fuel cells. Nat. Energy 8(7), 685–694 (2023). https://doi.org/10.1038/s41560-023-01263-210.1038/s41560-023-01263-2 ↗
43. C. Li, K. Yu, A. Bird, F. Guo, J. Ilavsky et al., Unraveling the core of fuel cell performance: engineering the ionomer/catalyst interface. Energy Environ. Sci. 16(7), 2977–2990 (2023). https://doi.org/10.1039/D2EE03553G10.1039/D2EE03553G ↗
44. T. Lazaridis, H.A. Gasteiger, Pt-catalyzed oxidation of PEMFC carbon supports: a path to highly accessible carbon morphologies and implications for start-up/shut-down degradation. J. Electrochem. Soc. 168(11), 114517 (2021). https://doi.org/10.1149/1945-7111/ac35ff10.1149/1945-7111/ac35ff ↗
45. S. Salari, M. Tam, C. McCague, J. Stumper, M. Bahrami, The ex-situ and in situ gas diffusivities of polymer electrolyte membrane fuel cell catalyst layer and contribution of primary pores, secondary pores, ionomer and water to the total oxygen diffusion resistance. J. Power Sources 449, 227479 (2020). https://doi.org/10.1016/j.jpowsour.2019.22747910.1016/j.jpowsour.2019.227479 ↗
46. C. Schlumberger, M. Thommes, Characterization of hierarchically ordered porous materials by physisorption and mercury porosimetry: a tutorial review. Adv. Mater. Interfaces 8(4), 2002181 (2021). https://doi.org/10.1002/admi.20200218110.1002/admi.202002181 ↗
47. S. Ghosh, H. Ohashi, H. Tabata, Y. Hashimasa, T. Yamaguchi, In-plane and through-plane non-uniform carbon corrosion of polymer electrolyte fuel cell cathode catalyst layer during extended potential cycles. J. Power Sources 362, 291–298 (2017). https://doi.org/10.1016/j.jpowsour.2017.07.01710.1016/j.jpowsour.2017.07.017 ↗
48. S. Ghosh, H. Ohashi, H. Tabata, Y. Hashimasa, T. Yamaguchi, Microstructural pore analysis of the catalyst layer in a polymer electrolyte membrane fuel cell: a combination of resin pore-filling and FIB/SEM. Int. J. Hydrog. Energy 40(45), 15663–15671 (2015). https://doi.org/10.1016/j.ijhydene.2015.09.08010.1016/j.ijhydene.2015.09.080 ↗
49. F.C. Cetinbas, R.K. Ahluwalia, N.N. Kariuki, V. De Andrade, D.J. Myers, Effects of porous carbon morphology, agglomerate structure and relative humidity on local oxygen transport resistance. J. Electrochem. Soc. 167(1), 013508 (2020). https://doi.org/10.1149/2.0082001jes10.1149/2.0082001jes ↗
50. C.Y. Jung, S.K. Kim, S.J. Lee, S.C. Yi, Three-dimensional reconstruction of coarse-dense dual catalyst layer for proton exchange membrane fuel cells. Electrochim. Acta 211, 142–147 (2016). https://doi.org/10.1016/j.electacta.2016.06.04010.1016/j.electacta.2016.06.040 ↗
51. M. Sabharwal, L.M. Pant, A. Putz, D. Susac, J. Jankovic et al., Analysis of catalyst layer microstructures: from imaging to performance. Fuel Cells 16(6), 734–753 (2016). https://doi.org/10.1002/fuce.20160000810.1002/fuce.201600008 ↗
52. M. Lopez-Haro, L. Guétaz, T. Printemps, A. Morin, S. Escribano et al., Three-dimensional analysis of Nafion layers in fuel cell electrodes. Nat. Commun. 5, 5229 (2014). https://doi.org/10.1038/ncomms622910.1038/ncomms6229 ↗
53. R. Sun, Z. Xia, X. Xu, R. Deng, S. Wang et al., Periodic evolution of the ionomer/catalyst interfacial structures towards proton conductance and oxygen transport in polymer electrolyte membrane fuel cells. Nano Energy 75, 104919 (2020). https://doi.org/10.1016/j.nanoen.2020.10491910.1016/j.nanoen.2020.104919 ↗
54. R. Girod, T. Lazaridis, H.A. Gasteiger, V. Tileli, Three-dimensional nanoimaging of fuel cell catalyst layers. Nat. Catal. 6(5), 383–391 (2023). https://doi.org/10.1038/s41929-023-00947-y10.1038/s41929-023-00947-y ↗
55. M. Turk, W. Baumeister, The promise and the challenges of cryo-electron tomography. FEBS Lett. 594(20), 3243–3261 (2020). https://doi.org/10.1002/1873-3468.1394810.1002/1873-3468.13948 ↗
56. E. Padgett, N. Andrejevic, Z. Liu, A. Kongkanand, W. Gu et al., Editors’ choice: connecting fuel cell catalyst nanostructure and accessibility using quantitative cryo-STEM tomography. J. Electrochem. Soc. 165(3), F173–F180 (2018). https://doi.org/10.1149/2.0541803jes10.1149/2.0541803jes ↗
57. S. Takahashi, J. Shimanuki, T. Mashio, A. Ohma, H. Tohma et al., Observation of ionomer in catalyst ink of polymer electrolyte fuel cell using cryogenic transmission electron microscopy. Electrochim. Acta 224, 178–185 (2017). https://doi.org/10.1016/j.electacta.2016.12.06810.1016/j.electacta.2016.12.068 ↗
58. T. Morawietz, M. Handl, C. Oldani, K. Andreas Friedrich, R. Hiesgen, Quantitative in situ analysis of ionomer structure in fuel cell catalytic layers. ACS Appl. Mater. Interfaces 8(40), 27044–27054 (2016). https://doi.org/10.1021/acsami.6b0718810.1021/acsami.6b07188 ↗
59. X. Cheng, J. You, S. Shen, G. Wei, X. Yan et al., An ingenious design of nanoporous nafion film for enhancing the local oxygen transport in cathode catalyst layers of PEMFCs. Chem. Eng. J. 439, 135387 (2022). https://doi.org/10.1016/j.cej.2022.13538710.1016/j.cej.2022.135387 ↗
60. Y. Su, X. Cheng, Y. Feng, H. Li, C. Yan et al., Hierarchical catalyst layer structure for enhancing local oxygen transport in low Pt proton exchange membrane fuel cells. J. Power Sources 603, 234453 (2024). https://doi.org/10.1016/j.jpowsour.2024.23445310.1016/j.jpowsour.2024.234453 ↗
61. H. Li, J. You, X. Cheng, L. Luo, X. Yan et al., Unraveling the effects of carbon corrosion on oxygen transport resistance in low Pt loading proton exchange membrane fuel cells. ACS Appl. Mater. Interfaces 16(1), 540–554 (2024). https://doi.org/10.1021/acsami.3c1345010.1021/acsami.3c13450 ↗
62. S.A. Berlinger, B.D. McCloskey, A.Z. Weber, Probing ionomer interactions with electrocatalyst particles in solution. ACS Energy Lett. 6(6), 2275–2282 (2021). https://doi.org/10.1021/acsenergylett.1c0086610.1021/acsenergylett.1c00866 ↗
63. T. Masuda, F. Sonsudin, P.R. Singh, H. Naohara, K. Uosaki, Potential-dependent adsorption and desorption of perfluorosulfonated ionomer on a platinum electrode surface probed by electrochemical quartz crystal microbalance and atomic force microscopy. J. Phys. Chem. C 117(30), 15704–15709 (2013). https://doi.org/10.1021/jp404376t10.1021/jp404376t ↗
64. M. Osawa, T. Nakane, K. Ito, W. Suëtaka, In situ characterization of platinum particles dispersed in nafion films on gold electrodes by infrared spectroscopy. J. Electroanal. Chem. Interfacial Electrochem. 270(1–2), 459–464 (1989). https://doi.org/10.1016/0022-0728(89)85060-010.1016/0022-0728(89)85060-0 ↗
65. H. Hanawa, K. Kunimatsu, M. Watanabe, H. Uchida, In situ ATR-FTIR analysis of the structure of Nafion–Pt/C and Nafion–Pt3Co/C interfaces in fuel cell. J. Phys. Chem. C 116(40), 21401–21406 (2012). https://doi.org/10.1021/jp306955q10.1021/jp306955q ↗
66. Y. Ayato, K. Kunimatsu, M. Osawa, T. Okada, Study of Pt electrode/nafion ionomer interface in HClO4 by in situ surface-enhanced FTIR spectroscopy. J. Electrochem. Soc. 153(2), A203 (2006). https://doi.org/10.1149/1.213764810.1149/1.2137648 ↗
67. A. Kusoglu, T.J. Dursch, A.Z. Weber, Nanostructure/swelling relationships of bulk and thin-film PFSA ionomers. Adv. Funct. Mater. 26(27), 4961–4975 (2016). https://doi.org/10.1002/adfm.20160086110.1002/adfm.201600861 ↗
68. C. Welch, A. Labouriau, R. Hjelm, B. Orler, C. Johnston et al., Nafion in dilute solvent systems: dispersion or solution? ACS Macro Lett. 1(12), 1403–1407 (2012). https://doi.org/10.1021/mz300520410.1021/mz3005204 ↗
69. A. Malekian, S. Salari, J. Stumper, N. Djilali, M. Bahrami, Effect of compression on pore size distribution and porosity of PEM fuel cell catalyst layers. Int. J. Hydrog. Energy 44(41), 23396–23405 (2019). https://doi.org/10.1016/j.ijhydene.2019.07.03610.1016/j.ijhydene.2019.07.036 ↗
70. S. Guan, F. Zhou, J. Tan, M. Pan, Influence of pore size optimization in catalyst layer on the mechanism of oxygen transport resistance in PEMFCs. Prog. Nat. Sci. Mater. Int. 30(6), 839–845 (2020). https://doi.org/10.1016/j.pnsc.2020.08.01710.1016/j.pnsc.2020.08.017 ↗
71. X. Cheng, C. Wang, G. Wei, X. Yan, S. Shen et al., Insight into the effect of pore-forming on oxygen transport behavior in ultra-low Pt PEMFCs. J. Electrochem. Soc. 166(14), F1055–F1061 (2019). https://doi.org/10.1149/2.0501914jes10.1149/2.0501914jes ↗
72. A. Ozden, S. Shahgaldi, X. Li, F. Hamdullahpur, A review of gas diffusion layers for proton exchange membrane fuel cells: With a focus on characteristics, characterization techniques, materials and designs. Prog. Energy Combust. Sci. 74, 50–102 (2019). https://doi.org/10.1016/j.pecs.2019.05.00210.1016/j.pecs.2019.05.002 ↗
73. X. Wang, H. Zhang, J. Zhang, H. Xu, X. Zhu et al., A bi-functional micro-porous layer with composite carbon black for PEM fuel cells. J. Power Sources 162(1), 474–479 (2006). https://doi.org/10.1016/j.jpowsour.2006.06.06410.1016/j.jpowsour.2006.06.064 ↗
74. B. Tjaden, S.J. Cooper, D.J. Brett, D. Kramer, P.R. Shearing, On the origin and application of the Bruggeman correlation for analysing transport phenomena in electrochemical systems. Curr. Opin. Chem. Eng. 12, 44–51 (2016). https://doi.org/10.1016/j.coche.2016.02.00610.1016/j.coche.2016.02.006 ↗
75. J. Landesfeind, J. Hattendorff, A. Ehrl, W.A. Wall, H.A. Gasteiger, Tortuosity determination of battery electrodes and separators by impedance spectroscopy. J. Electrochem. Soc. 163(7), A1373–A1387 (2016). https://doi.org/10.1149/2.1141607jes10.1149/2.1141607jes ↗
76. M.B. Sassin, Y. Garsany, R.W. Atkinson, R.M.E. Hjelm, K.E. Swider-Lyons, Understanding the interplay between cathode catalyst layer porosity and thickness on transport limitations en route to high-performance PEMFCs. Int. J. Hydrog. Energy 44(31), 16944–16955 (2019). https://doi.org/10.1016/j.ijhydene.2019.04.19410.1016/j.ijhydene.2019.04.194 ↗
77. J. Zhao, X. He, L. Wang, J. Tian, C. Wan et al., Addition of NH4HCO3 as pore-former in membrane electrode assembly for PEMFC. Int. J. Hydrog. Energy 32(3), 380–384 (2007). https://doi.org/10.1016/j.ijhydene.2006.06.05710.1016/j.ijhydene.2006.06.057 ↗
78. A. Kusoglu, A.Z. Weber, New insights into perfluorinated sulfonic-acid ionomers. Chem. Rev. 117(3), 987–1104 (2017). https://doi.org/10.1021/acs.chemrev.6b0015910.1021/acs.chemrev.6b00159 ↗
79. S.C. DeCaluwe, A.M. Baker, P. Bhargava, J.E. Fischer, J.A. Dura, Structure-property relationships at Nafion thin-film interfaces: Thickness effects on hydration and anisotropic ion transport. Nano Energy 46, 91–100 (2018). https://doi.org/10.1016/j.nanoen.2018.01.00810.1016/j.nanoen.2018.01.008 ↗
80. K.A. Page, A. Kusoglu, C.M. Stafford, S. Kim, R.J. Kline et al., Confinement-driven increase in ionomer thin-film modulus. Nano Lett. 14(5), 2299–2304 (2014). https://doi.org/10.1021/nl501233g10.1021/nl501233g ↗
81. Y. Ono, T. Mashio, S. Takaichi, A. Ohma, H. Kanesaka et al., The analysis of performance loss with low platinum loaded cathode catalyst layers. ECS Trans. 28(27), 69–78 (2010). https://doi.org/10.1149/1.349661410.1149/1.3496614 ↗
82. S.-Y. Lim, S.-I. Kim, M.S. Lee, S.-J. Bak, D.H. Lee et al., Effect of uniformity and surface morphology of Pt nanoparticles to enhance oxygen reduction reaction in polymer electrolyte membrane fuel cells. Int. J. Hydrog. Energy 47(68), 29456–29466 (2022). https://doi.org/10.1016/j.ijhydene.2022.06.26410.1016/j.ijhydene.2022.06.264 ↗
83. J.P. Owejan, J.E. Owejan, W. Gu, Impact of platinum loading and catalyst layer structure on PEMFC performance. J. Electrochem. Soc. 160(8), F824–F833 (2013). https://doi.org/10.1149/2.072308jes10.1149/2.072308jes ↗
84. M.A. Modestino, D.K. Paul, S. Dishari, S.A. Petrina, F.I. Allen et al., Self-assembly and transport limitations in confined nafion films. Macromolecules 46(3), 867–873 (2013). https://doi.org/10.1021/ma301999a10.1021/ma301999a ↗
85. M.A. Modestino, A. Kusoglu, A. Hexemer, A.Z. Weber, R.A. Segalman, Controlling nafion structure and properties via wetting interactions. Macromolecules 45(11), 4681–4688 (2012). https://doi.org/10.1021/ma300212f10.1021/ma300212f ↗
86. S.A. Eastman, S. Kim, K.A. Page, B.W. Rowe, S. Kang et al., Effect of confinement on structure, water solubility, and water transport in nafion thin films. Macromolecules 45(19), 7920–7930 (2012). https://doi.org/10.1021/ma301289v10.1021/ma301289v ↗
87. S. Shen, X. Cheng, C. Wang, X. Yan, C. Ke et al., Exploration of significant influences of the operating conditions on the local O2 transport in proton exchange membrane fuel cells (PEMFCs). Phys. Chem. Chem. Phys. 19(38), 26221–26229 (2017). https://doi.org/10.1039/C7CP04837H10.1039/C7CP04837H ↗
88. C. Wang, X. Cheng, X. Yan, S. Shen, C. Ke et al., Respective influence of ionomer content on local and bulk oxygen transport resistance in the catalyst layer of PEMFCs with low Pt loading. J. Electrochem. Soc. 166(4), F239–F245 (2019). https://doi.org/10.1149/2.0401904jes10.1149/2.0401904jes ↗
89. H. Li, J. You, Y. Feng, X. Yan, J. Yin et al., Comprehensive understanding of oxygen transport at Gas/ionomer/electrocatalyst triple phase boundary in PEMFCs. Chem. Eng. J. 478, 147454 (2023). https://doi.org/10.1016/j.cej.2023.14745410.1016/j.cej.2023.147454 ↗
90. T. Suzuki, K. Kudo, Y. Morimoto, Model for investigation of oxygen transport limitation in a polymer electrolyte fuel cell. J. Power Sources 222, 379–389 (2013). https://doi.org/10.1016/j.jpowsour.2012.08.06810.1016/j.jpowsour.2012.08.068 ↗
91. K. Kudo, R. Jinnouchi, Y. Morimoto, Humidity and temperature dependences of oxygen transport resistance of nafion thin film on platinum electrode. Electrochim. Acta 209, 682–690 (2016). https://doi.org/10.1016/j.electacta.2016.04.02310.1016/j.electacta.2016.04.023 ↗
92. K. Kodama, K. Motobayashi, A. Shinohara, N. Hasegawa, K. Kudo et al., Effect of the side-chain structure of perfluoro-sulfonic acid ionomers on the oxygen reduction reaction on the surface of Pt. ACS Catal. 8(1), 694–700 (2018). https://doi.org/10.1021/acscatal.7b0357110.1021/acscatal.7b03571 ↗
93. R. Jinnouchi, K. Kudo, N. Kitano, Y. Morimoto, Molecular dynamics simulations on O2 permeation through nafion ionomer on platinum surface. Electrochim. Acta 188, 767–776 (2016). https://doi.org/10.1016/j.electacta.2015.12.03110.1016/j.electacta.2015.12.031 ↗
94. Y. Kurihara, T. Mabuchi, T. Tokumasu, Molecular dynamics study of oxygen transport resistance through ionomer thin film on Pt surface. J. Power. Sources 414, 263–271 (2019). https://doi.org/10.1016/j.jpowsour.2019.01.01110.1016/j.jpowsour.2019.01.011 ↗
95. M.B. Dixit, B.A. Harkey, F. Shen, K.B. Hatzell, Catalyst layer ink interactions that affect coatability. J. Electrochem. Soc. 165(5), F264–F271 (2018). https://doi.org/10.1149/2.0191805jes10.1149/2.0191805jes ↗
96. H. Ren, X. Meng, Y. Lin, Z. Shao, Microstructure formation mechanism of catalyst layer and its effect on fuel cell performance: Effect of dispersion medium composition. J. Energy Chem. 73, 588–598 (2022). https://doi.org/10.1016/j.jechem.2022.06.03410.1016/j.jechem.2022.06.034 ↗
97. T.-H. Kim, J.-Y. Yi, C.-Y. Jung, E. Jeong, S.-C. Yi, Solvent effect on the Nafion agglomerate morphology in the catalyst layer of the proton exchange membrane fuel cells. Int. J. Hydrog. Energy 42(1), 478–485 (2017). https://doi.org/10.1016/j.ijhydene.2016.12.01510.1016/j.ijhydene.2016.12.015 ↗
98. S.A. Berlinger, B.D. McCloskey, A.Z. Weber, Inherent acidity of perfluorosulfonic acid ionomer dispersions and implications for ink aggregation. J. Phys. Chem. B 122(31), 7790–7796 (2018). https://doi.org/10.1021/acs.jpcb.8b0649310.1021/acs.jpcb.8b06493 ↗
99. M. Wang, J.H. Park, S. Kabir, K.C. Neyerlin, N.N. Kariuki et al., Impact of catalyst ink dispersing methodology on fuel cell performance using in situ X-ray scattering. ACS Appl. Energy Mater. 2(9), 6417–6427 (2019). https://doi.org/10.1021/acsaem.9b0103710.1021/acsaem.9b01037 ↗
100. B.H. Lim, E.H. Majlan, A. Tajuddin, T. Husaini, W.R. Wan Daud et al., Comparison of catalyst-coated membranes and catalyst-coated substrate for PEMFC membrane electrode assembly: a review. Chin. J. Chem. Eng. 33, 1–16 (2021). https://doi.org/10.1016/j.cjche.2020.07.04410.1016/j.cjche.2020.07.044 ↗