journal article·2023-12Open access

Long-Chain Gemini Surfactant-Assisted Blade Coating Enables Large-Area Carbon-Based Perovskite Solar Modules with Record Performance

Yumin Ren, Kai Zhang, Zedong Lin, Xiaozhen Wei, Man Xu, Xianzhen Huang, Haining Chen, Shihe Yang

Nano-Micro Letters· Volume 15· Issue 1

Abstract

Abstract Carbon-based perovskite solar cells show great potential owing to their low-cost production and superior stability in ambient air. However, scaling up to high-efficiency carbon-based solar modules hinges on reliable deposition of uniform defect-free perovskite films over large areas, which is an unsettled but urgent issue. In this work, a long-chain gemini surfactant is introduced into perovskite precursor ink to enforce self-assembly into a network structure, considerably enhancing the coverage and smoothness of the perovskite films. The long gemini surfactant plays a distinctively synergistic role in perovskite film construction, crystallization kinetics modulation and defect passivation, leading to a certified record power conversion efficiency of 15.46% with Voc of 1.13 V and Jsc of 22.92 mA cm−2 for this type of modules. Importantly, all of the functional layers of the module are printed through a simple and high-speed (300 cm min−1) blade coating strategy in ambient atmosphere. These results mark a significant step toward the commercialization of all-printable carbon-based perovskite solar modules.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. NREL. Best research-cell efficiency chart (2023). https://www.nrel.gov/pv/cell-efficiency.html
2. M. Kim, J. Jeong, H.Z. Lu, T.K. Lee, F.T. Eickemeyer et al., Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells. Science 375(6578), 302–306 (2022). https://doi.org/10.1126/science.abh188510.1126/science.abh1885 ↗
3. Y. Ding, B. Ding, H. Kanda, O.J. Usiobo, T. Gallet et al., Single-crystalline TiO2 nanoparticles for stable and efficient perovskite modules. Nat. Nanotechnol. 17(6), 598–605 (2022). https://doi.org/10.1038/s41565-022-01108-110.1038/s41565-022-01108-1 ↗
4. Y. Li, Z. Lin, J. Wang, R. Xu, K. Zhang et al., Amine salts vapor healing perfected perovskite layers for niox based p-i-n solar cells. Adv. Funct. Mater. (2022). https://doi.org/10.1002/adfm.20220399510.1002/adfm.202203995 ↗
5. Z. Li, B. Li, X. Wu, S.A. Sheppard, S. Zhang et al., Organometallic-functionalized interfaces for highly efficient inverted perovskite solar cells. Science 376(6591), 416–420 (2022). https://doi.org/10.1126/science.abm856610.1126/science.abm8566 ↗
6. P. Calado, A.M. Telford, D. Bryant, X. Li, J. Nelson et al., Evidence for ion migration in hybrid perovskite solar cells with minimal hysteresis. Nat. Commun. 7, 13831 (2016). https://doi.org/10.1038/ncomms1383110.1038/ncomms13831 ↗
7. Y.B. Yuan, J.S. Huang, Ion migration in organometal trihalide perovskite and its impact on photovoltaic efficiency and stability. Acc. Chem. Res. 49(2), 286–293 (2016). https://doi.org/10.1021/acs.accounts.5b0042010.1021/acs.accounts.5b00420 ↗
8. Y. Kato, L.K. Ono, M.V. Lee, S. Wang, S.R. Raga et al., Silver iodide formation in methyl ammonium lead iodide perovskite solar cells with silver top electrodes. Adv. Mater. Interfaces 2(13), 1500195 (2015). https://doi.org/10.1002/admi.20150019510.1002/admi.201500195 ↗
9. K. Domanski, J.-P. Correa-Baena, N. Mine, M.K. Nazeeruddin, A. Abate et al., Not all that glitters is gold: Metal-migration-induced degradation in perovskite solar cells. ACS Nano 10(6), 6306–6314 (2016). https://doi.org/10.1021/acsnano.6b0261310.1021/acsnano.6b02613 ↗
10. L. Fagiolari, F. Bella, Carbon-based materials for stable, cheaper and large-scale processable perovskite solar cells. Energy Environ. Sci. 12(12), 3437–3472 (2019). https://doi.org/10.1039/c9ee02115a10.1039/c9ee02115a ↗
11. X. Zhang, Z. Yu, D. Zhang, Q. Tai, X.Z. Zhao, Recent progress of carbon-based inorganic perovskite solar cells: From efficiency to stability. Adv. Energy Mater. (2022). https://doi.org/10.1002/aenm.20220132010.1002/aenm.202201320 ↗
12. A. Mei, Y. Sheng, Y. Ming, Y. Hu, Y. Rong et al., Stabilizing perovskite solar cells to iec61215:2016 standards with over 9,000-h operational tracking. Joule 4(12), 2646–2660 (2020). https://doi.org/10.1016/j.joule.2020.09.01010.1016/j.joule.2020.09.010 ↗
13. Y. Yang, M.T. Hoang, D. Yao, N.D. Pham, V.T. Tiong et al., Spiro-ometad or cuscn as a preferable hole transport material for carbon-based planar perovskite solar cells. J. Mater. Chem. A 8(25), 12723–12734 (2020). https://doi.org/10.1039/d0ta03951a10.1039/d0ta03951a ↗
14. H. Chen, S. Yang, Carbon-based perovskite solar cells without hole transport materials: the front runner to the market? Adv. Mater. 29(24), 1603994 (2017). https://doi.org/10.1002/adma.20160399410.1002/adma.201603994 ↗
15. H. Zhang, J. Xiao, J. Shi, H. Su, Y. Luo et al., Self-adhesive macroporous carbon electrodes for efficient and stable perovskite solar cells. Adv. Funct. Mater. 28(39), 1802985 (2018). https://doi.org/10.1002/adfm.20180298510.1002/adfm.201802985 ↗
16. J. Ryu, K. Lee, J. Yun, H. Yu, J. Lee et al., Paintable carbon-based perovskite solar cells with engineered perovskite/carbon interface using carbon nanotubes dripping method. Small 13(38), 1701225 (2017). https://doi.org/10.1002/smll.20170122510.1002/smll.201701225 ↗
17. D.-K. Lee, D.-N. Jeong, T.K. Ahn, N.-G. Park, Precursor engineering for a large-area perovskite solar cell with > 19% efficiency. ACS Energy Lett. 4(10), 2393–2401 (2019). https://doi.org/10.1021/acsenergylett.9b0173510.1021/acsenergylett.9b01735 ↗
18. Y. Deng, X. Zheng, Y. Bai, Q. Wang, J. Zhao et al., Surfactant-controlled ink drying enables high-speed deposition of perovskite films for efficient photovoltaic modules. Nat. Energy 3(7), 560–566 (2018). https://doi.org/10.1038/s41560-018-0153-910.1038/s41560-018-0153-9 ↗
19. S. Tang, Y. Deng, X. Zheng, Y. Bai, Y. Fang et al., Composition engineering in doctor-blading of perovskite solar cells. Adv. Energy Mater. 7(18), 1700302 (2017). https://doi.org/10.1002/aenm.20170030210.1002/aenm.201700302 ↗
20. M. Xu, W. Ji, Y. Sheng, Y. Wu, H. Cheng et al., Efficient triple-mesoscopic perovskite solar mini-modules fabricated with slot-die coating. Nano Energy 74, 104842 (2020). https://doi.org/10.1016/j.nanoen.2020.10484210.1016/j.nanoen.2020.104842 ↗
21. Y. Hu, S. Si, A. Mei, Y. Rong, H. Liu et al., Stable large-area (10×10cm2) printable mesoscopic perovskite module exceeding 10% efficiency. Sol. RRL 1(2), 1600019 (2017). https://doi.org/10.1002/solr.20160001910.1002/solr.201600019 ↗
22. H. Huang, J. Shi, L. Zhu, D. Li, Y. Luo et al., Two-step ultrasonic spray deposition of CH3NH3PbI3 for efficient and large-area perovskite solar cell. Nano Energy 27, 352–358 (2016). https://doi.org/10.1016/j.nanoen.2016.07.02610.1016/j.nanoen.2016.07.026 ↗
23. K. Liu, Q. Liang, M. Qin, D. Shen, H. Yin et al., Zwitterionic-surfactant-assisted room-temperature coating of efficient perovskite solar cells. Joule 4(11), 2404–2425 (2020). https://doi.org/10.1016/j.joule.2020.09.01110.1016/j.joule.2020.09.011 ↗
24. X. Zheng, Y. Deng, B. Chen, H. Wei, X. Xiao et al., Dual functions of crystallization control and defect passivation enabled by sulfonic zwitterions for stable and efficient perovskite solar cells. Adv. Mater. 30(52), 1803428 (2018). https://doi.org/10.1002/adma.20180342810.1002/adma.201803428 ↗
25. K. Ueda, M. Fujimoto, H. Noto, T. Sakaeda, S. Iwakawa, Effect of acyl chains of phosphatidylcholines on the pharmacokinetics of menatetrenone incorporated in o/w lipid emulsions prepared with phosphatidylcholines and soybean oil in rats. J. Pharm. Pharmacol. 56(7), 855–859 (2004). https://doi.org/10.1211/002235702379010.1211/0022357023790 ↗
26. K. Zhang, Z. Wang, G. Wang, J. Wang, Y. Li et al., A prenucleation strategy for ambient fabrication of perovskite solar cells with high device performance uniformity. Nat. Commun. 11(1), 1006 (2020). https://doi.org/10.1038/s41467-020-14715-010.1038/s41467-020-14715-0 ↗
27. S. Xiao, Y. Bai, X. Meng, T. Zhang, H. Chen et al., Unveiling a key intermediate in solvent vapor postannealing to enlarge crystalline domains of organometal halide perovskite films. Adv. Funct. Mater. 27(12), 1604944 (2017). https://doi.org/10.1002/adfm.20160494410.1002/adfm.201604944 ↗
28. Y. Guo, K. Shoyama, W. Sato, Y. Matsuo, K. Inoue et al., Chemical pathways connecting lead(II) iodide and perovskite via polymeric plumbate(II) fiber. J. Am. Chem. Soc. 137(50), 15907–15914 (2015). https://doi.org/10.1021/jacs.5b1059910.1021/jacs.5b10599 ↗
29. C. Tanford, Theory of micelle formation in aqueous-solutions. J. Phys. Chem. 78(24), 2469–2479 (1974). https://doi.org/10.1021/j100617a01210.1021/j100617a012 ↗
30. Y. Nojima, K. Iwata, Viscosity heterogeneity inside lipid bilayers of single-component phosphatidylcholine liposomes observed with picosecond time-resolved fluorescence spectroscopy. J. Phys. Chem. B 118(29), 8631–8641 (2014). https://doi.org/10.1021/jp503921e10.1021/jp503921e ↗
31. S.K. Owusu-Ware, B.Z. Chowdhry, S.A. Leharne, M.D. Antonijevic, Phase behaviour of dehydrated phosphatidylcholines. J. Therm. Anal. Calorim. 127(1), 415–421 (2017). https://doi.org/10.1007/s10973-016-5957-x10.1007/s10973-016-5957-x ↗
32. H. Yin, Y. Lin, J. Huang, Microstructures and rheological dynamics of viscoelastic solutions in a catanionic surfactant system. J. Colloid Interf. Sci. 338(1), 177–183 (2009). https://doi.org/10.1016/j.jcis.2009.05.07610.1016/j.jcis.2009.05.076 ↗
33. S. Hofmann, H. Hoffmann, Shear-induced micellar structures in ternary surfactant mixtures: the influence of the structure of the micellar interface. J. Phys. Chem. B 102(29), 5614–5624 (1998). https://doi.org/10.1021/jp980339w10.1021/jp980339w ↗
34. R. Bruinsma, W.M. Gelbart, A. Ben-Shaul, Flow-induced gelation of living (micellar) polymers. J. Chem. Phys. 96(10), 7710–7727 (1992). https://doi.org/10.1063/1.46237110.1063/1.462371 ↗
35. S.J. Weinstein, K.J. Ruschak, Coating flows. Annu. Rev. Fluid Mech. 36, 29–53 (2004). https://doi.org/10.1146/annurev.fluid.36.050802.12204910.1146/annurev.fluid.36.050802.122049 ↗
36. F.M. Menger, C.A. Littau, Gemini surfactants-a new class of self-assembling molecules. J. Am. Chem. Soc. 115(22), 10083–10090 (1993). https://doi.org/10.1021/ja00075a02510.1021/ja00075a025 ↗
37. F.M. Menger, C.A. Littau, Gemini-surfactants: synthesis and properties. J. Am. Chem. Soc. 113(4), 1451–1452 (1991). https://doi.org/10.1021/ja00004a07710.1021/ja00004a077 ↗
38. S. Karaborni, K. Esselink, P.A.J. Hilbers, B. Smit, J. Karthauser et al., Simulating the self-assembly of gemini (dimeric) surfactants. Science 266(5183), 254–256 (1994). https://doi.org/10.1126/science.266.5183.25410.1126/science.266.5183.254 ↗
39. B.J. Ennis, J. Li, P. Robert, The influence of viscosity on the strength of an axially strained pendular liquid bridge. Chem. Eng. Sci. 45(10), 3071–3088 (1990). https://doi.org/10.1016/0009-2509(90)80054-I10.1016/0009-2509(90)80054-I ↗
40. C.M. Boyce, Gas-solid fluidization with liquid bridging: A review from a modeling perspective. Powder Technol. 336, 12–29 (2018). https://doi.org/10.1016/j.powtec.2018.05.02710.1016/j.powtec.2018.05.027 ↗
41. A.Z. Zinchenko, R.H. Davis, A boundary-integral study of a drop squeezing through interparticle constrictions. J. Fluid Mech. 564, 227–266 (2006). https://doi.org/10.1017/s002211200600147910.1017/s0022112006001479 ↗
42. K.J. Ruschak, Coating flows. Annu. Rev. Fluid Mech. 17, 65–89 (1985). https://doi.org/10.1146/annurev.fl.17.010185.00043310.1146/annurev.fl.17.010185.000433 ↗
43. J. Lu, L. Jiang, W. Li, F. Li, N.K. Pai et al., Diammonium and monoammonium mixed-organic-cation perovskites for high performance solar cells with improved stability. Adv. Energy Mater. 7(18), 1700444 (2017). https://doi.org/10.1002/aenm.20170044410.1002/aenm.201700444 ↗
44. B. Wu, H.T. Nguyen, Z. Ku, G. Han, D. Giovanni et al., Discerning the surface and bulk recombination kinetics of organic-inorganic halide perovskite single crystals. Adv. Energy Mater. 6(14), 1600551 (2016). https://doi.org/10.1002/aenm.20160055110.1002/aenm.201600551 ↗
45. M. Maiberg, T. Hölscher, S. Zahedi-Azad, R. Scheer, Theoretical study of time-resolved luminescence in semiconductors.III. Trap states in the band gap. J. Appl. Phys. 118(10), 105701 (2015). https://doi.org/10.1063/1.492987710.1063/1.4929877 ↗
46. Z. Lin, Extraction technique of trap states based on transient photo-voltage measurement. Sci. Rep. 10(1), 12888 (2020). https://doi.org/10.1038/s41598-020-69914-y10.1038/s41598-020-69914-y ↗
47. B. Shi, B. Liu, J. Luo, Y. Li, X. Zhang, Enhanced light absorption of thin perovskite solar cells using textured substrates. Sol. Energy Mat. Sol. C 168, 214–220 (2017). https://doi.org/10.1016/j.solmat.2017.04.03810.1016/j.solmat.2017.04.038 ↗
48. F. Zhang, X. Yang, M. Cheng, J. Li, W. Wang et al., Engineering of hole-selective contact for low temperature-processed carbon counter electrode-based perovskite solar cells. J. Mater. Chem. A 3(48), 24272–24280 (2015). https://doi.org/10.1039/c5ta07507f10.1039/c5ta07507f ↗
49. J. Wu, Y. Cui, B. Yu, K. Liu, Y. Li et al., A simple way to simultaneously release the interface stress and realize the inner encapsulation for highly efficient and stable perovskite solar cells. Adv. Funct. Mater. (2019). https://doi.org/10.1002/adfm.20190533610.1002/adfm.201905336 ↗