journal article·2024-12Open access

Blade-Coated Porous 3D Carbon Composite Electrodes Coupled with Multiscale Interfaces for Highly Sensitive All-Paper Pressure Sensors

Bowen Zheng, Ruisheng Guo, Xiaoqiang Dou, Yueqing Fu, Bingjun Yang, Xuqing Liu, Feng Zhou

Nano-Micro Letters· Volume 16· Issue 1

Abstract

Abstract Flexible and wearable pressure sensors hold immense promise for health monitoring, covering disease detection and postoperative rehabilitation. Developing pressure sensors with high sensitivity, wide detection range, and cost-effectiveness is paramount. By leveraging paper for its sustainability, biocompatibility, and inherent porous structure, herein, a solution-processed all-paper resistive pressure sensor is designed with outstanding performance. A ternary composite paste, comprising a compressible 3D carbon skeleton, conductive polymer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate), and cohesive carbon nanotubes, is blade-coated on paper and naturally dried to form the porous composite electrode with hierachical micro- and nano-structured surface. Combined with screen-printed Cu electrodes in submillimeter finger widths on rough paper, this creates a multiscale hierarchical contact interface between electrodes, significantly enhancing sensitivity (1014 kPa−1) and expanding the detection range (up to 300 kPa) of as-resulted all-paper pressure sensor with low detection limit and power consumption. Its versatility ranges from subtle wrist pulses, robust finger taps, to large-area spatial force detection, highlighting its intricate submillimeter-micrometer-nanometer hierarchical interface and nanometer porosity in the composite electrode. Ultimately, this all-paper resistive pressure sensor, with its superior sensing capabilities, large-scale fabrication potential, and cost-effectiveness, paves the way for next-generation wearable electronics, ushering in an era of advanced, sustainable technological solutions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Radiation Dose and Imaging · Advances in Oncology and Radiotherapy · Nursing Education, Practice, and Leadership

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Q.-J. Sun, X.-H. Zhao, Y. Zhou, C.-C. Yeung, W. Wu et al., Fingertip-skin-inspired highly sensitive and multifunctional sensor with hierarchically structured conductive graphite/polydimethylsiloxane foams. Adv. Funct. Mater. 29, 1808829 (2019). https://doi.org/10.1002/adfm.20180882910.1002/adfm.201808829 ↗
2. L. Chen, M. Lu, H. Yang, J.R. Salas Avila, B. Shi et al., Textile-based capacitive sensor for physical rehabilitation via surface topological modification. ACS Nano 14, 8191–8201 (2020). https://doi.org/10.1021/acsnano.0c0164310.1021/acsnano.0c01643 ↗
3. L. Shi, Z. Li, M. Chen, Y. Qin, Y. Jiang et al., Quantum effect-based flexible and transparent pressure sensors with ultrahigh sensitivity and sensing density. Nat. Commun. 11, 3529 (2020). https://doi.org/10.1038/s41467-020-17298-y10.1038/s41467-020-17298-y ↗
4. S. Baek, Y. Lee, J. Baek, J. Kwon, S. Kim et al., Spatiotemporal measurement of arterial pulse waves enabled by wearable active-matrix pressure sensor arrays. ACS Nano 16, 368–377 (2022). https://doi.org/10.1021/acsnano.1c0669510.1021/acsnano.1c06695 ↗
5. Z. Shi, L. Meng, X. Shi, H. Li, J. Zhang et al., Morphological engineering of sensing materials for flexible pressure sensors and artificial intelligence applications. Nano-Micro Lett. 14, 141 (2022). https://doi.org/10.1007/s40820-022-00874-w10.1007/s40820-022-00874-w ↗
6. R. Kaveti, J.H. Lee, J.K. Youn, T.-M. Jang, W.B. Han et al., Soft, long-lived, bioresorbable electronic surgical mesh with wireless pressure monitor and on-demand drug delivery. Adv. Mater. 36, 2307391 (2024). https://doi.org/10.1002/adma.20230739110.1002/adma.202307391 ↗
7. R. Chen, T. Luo, J. Wang, R. Wang, C. Zhang et al., Nonlinearity synergy: an elegant strategy for realizing high-sensitivity and wide-linear-range pressure sensing. Nat. Commun. 14, 6641 (2023). https://doi.org/10.1038/s41467-023-42361-910.1038/s41467-023-42361-9 ↗
8. H. Wang, X. Dou, Z. Wang, Z. Liu, Q. Ye et al., Boosting sensitivity and durability of pressure sensors based on compressible Cu sponges by strengthening adhesion of “rigid-soft” interfaces. Small 19, 2303234 (2023). https://doi.org/10.1002/smll.20230323410.1002/smll.202303234 ↗
9. K. Pang, X. Song, Z. Xu, X. Liu, Y. Liu et al., Hydroplastic foaming of graphene aerogels and artificially intelligent tactile sensors. Sci. Adv. 6, 4045 (2020). https://doi.org/10.1126/sciadv.abd404510.1126/sciadv.abd4045 ↗
10. B. Yin, X. Liu, H. Gao, T. Fu, J. Yao, Bioinspired and bristled microparticles for ultrasensitive pressure and strain sensors. Nat. Commun. 9, 5161 (2018). https://doi.org/10.1038/s41467-018-07672-210.1038/s41467-018-07672-2 ↗
11. S. Yu, L. Li, J. Wang, E. Liu, J. Zhao et al., Light-boosting highly sensitive pressure sensors based on bioinspired multiscale surface structures. Adv. Funct. Mater. 30, 1907091 (2020). https://doi.org/10.1002/adfm.20190709110.1002/adfm.201907091 ↗
12. Y. Lee, J. Park, S. Cho, Y.-E. Shin, H. Lee et al., Flexible ferroelectric sensors with ultrahigh pressure sensitivity and linear response over exceptionally broad pressure range. ACS Nano 12, 4045–4054 (2018). https://doi.org/10.1021/acsnano.8b0180510.1021/acsnano.8b01805 ↗
13. M. Ha, S. Lim, J. Park, D.-S. Um, Y. Lee et al., Bioinspired interlocked and hierarchical design of ZnO nanowire arrays for static and dynamic pressure-sensitive electronic skins. Adv. Funct. Mater. 25, 2841–2849 (2015). https://doi.org/10.1002/adfm.20150045310.1002/adfm.201500453 ↗
14. Y. Zhang, T.-H. Chang, L. Jing, K. Li, H. Yang et al., Heterogeneous, 3D architecturing of 2D titanium carbide (MXene) for microdroplet manipulation and voice recognition. ACS Appl. Mater. Interfaces 12, 8392–8402 (2020). https://doi.org/10.1021/acsami.9b1887910.1021/acsami.9b18879 ↗
15. W. Lin, C. Wei, S. Yu, Z. Chen, C. Zhang et al., Programmable and ultrasensitive haptic interfaces enabling closed-loop human–machine interactions. Adv. Funct. Mater. 33, 2305919 (2023). https://doi.org/10.1002/adfm.20230591910.1002/adfm.202305919 ↗
16. Y. Xu, Q. Fei, M. Page, G. Zhao, Y. Ling et al., Paper-based wearable electronics. iScience 24, 102736 (2021). https://doi.org/10.1016/j.isci.2021.10273610.1016/j.isci.2021.102736 ↗
17. Y. Zhang, T. Zhang, Z. Huang, J. Yang, A new class of electronic devices based on flexible porous substrates. Adv. Sci. 9, e2105084 (2022). https://doi.org/10.1002/advs.20210508410.1002/advs.202105084 ↗
18. Z. Liu, T. Zhu, J. Wang, Z. Zheng, Y. Li et al., Functionalized fiber-based strain sensors: pathway to next-generation wearable electronics. Nano-Micro Lett. 14, 61 (2022). https://doi.org/10.1007/s40820-022-00806-810.1007/s40820-022-00806-8 ↗
19. L. Yang, H. Wang, W. Yuan, Y. Li, P. Gao et al., Wearable pressure sensors based on MXene/tissue papers for wireless human health monitoring. ACS Appl. Mater. Interfaces 13, 60531–60543 (2021). https://doi.org/10.1021/acsami.1c2200110.1021/acsami.1c22001 ↗
20. D. Wang, D. Zhang, P. Li, Z. Yang, Q. Mi et al., Electrospinning of flexible Poly(vinyl alcohol)/MXene nanofiber-based humidity sensor self-powered by monolayer molybdenum diselenide piezoelectric nanogenerator. Nano-Micro Lett. 13, 57 (2021). https://doi.org/10.1007/s40820-020-00580-510.1007/s40820-020-00580-5 ↗
21. T. Xu, Q. Song, K. Liu, H. Liu, J. Pan et al., Nanocellulose-assisted construction of multifunctional MXene-based aerogels with engineering biomimetic texture for pressure sensor and compressible electrode. Nano-Micro Lett. 15, 98 (2023). https://doi.org/10.1007/s40820-023-01073-x10.1007/s40820-023-01073-x ↗
22. Z. Wang, J. Ding, R. Guo, Printable all-paper pressure sensors with high sensitivity and wide sensing range. ACS Appl. Mater. Interfaces 15, 4789–4798 (2023). https://doi.org/10.1021/acsami.2c1910010.1021/acsami.2c19100 ↗
23. S.Y. An, B.T. McAllister, E. Grignon, S. Evariste, D.S. Seferos, Increasing ionic conductivity in polymer electrodes using oxanorbornene. EcoMat 4, e12178 (2022). https://doi.org/10.1002/eom2.1217810.1002/eom2.12178 ↗
24. L.-Q. Tao, K.-N. Zhang, H. Tian, Y. Liu, D.-Y. Wang et al., Graphene-paper pressure sensor for detecting human motions. ACS Nano 11, 8790–8795 (2017). https://doi.org/10.1021/acsnano.7b0282610.1021/acsnano.7b02826 ↗
25. Z. Ren, H. Zhang, N. Liu, D. Lei, Q. Zhang et al., Self-powered 2D nanofluidic graphene pressure sensor with Serosa-Mimetic structure. EcoMat 5, e12299 (2023). https://doi.org/10.1002/eom2.1229910.1002/eom2.12299 ↗
26. S. Chen, Y. Wang, L. Yang, F. Karouta, K. Sun, Electron-induced perpendicular graphene sheets embedded porous carbon film for flexible touch sensors. Nano-Micro Lett. 12, 136 (2020). https://doi.org/10.1007/s40820-020-00480-810.1007/s40820-020-00480-8 ↗
27. R. Matsukawa, D. Kobayashi, H. Mitsui, T. Ikuno, Environment-friendly paper-based flexible pressure sensors with carbon nanotubes and liquid metal. Appl. Phys. Express 13, 027001 (2020). https://doi.org/10.7567/1882-0786/ab658b10.7567/1882-0786/ab658b ↗
28. X. Sun, J. Sun, T. Li, S. Zheng, C. Wang et al., Flexible tactile electronic skin sensor with 3D force detection based on porous CNTs/PDMS nanocomposites. Nano-Micro Lett. 11, 57 (2019). https://doi.org/10.1007/s40820-019-0288-710.1007/s40820-019-0288-7 ↗
29. B. Liang, Z. Zhang, W. Chen, D. Lu, L. Yang et al., Direct patterning of carbon nanotube via stamp contact printing process for stretchable and sensitive sensing devices. Nano-Micro Lett. 11, 92 (2019). https://doi.org/10.1007/s40820-019-0323-810.1007/s40820-019-0323-8 ↗
30. L. Gao, C. Zhu, L. Li, C. Zhang, J. Liu et al., All paper-based flexible and wearable piezoresistive pressure sensor. ACS Appl. Mater. Interfaces 11, 25034–25042 (2019). https://doi.org/10.1021/acsami.9b0746510.1021/acsami.9b07465 ↗
31. C. Wang, K. Xia, H. Wang, X. Liang, Z. Yin et al., Advanced carbon for flexible and wearable electronics. Adv. Mater. 31, 1801072 (2019). https://doi.org/10.1002/adma.20180107210.1002/adma.201801072 ↗
32. Z. Li, F. Chen, N. Zhu, L. Zhang, Z. Xie, Tip-enhanced sub-femtomolar steroid immunosensing via micropyramidal flexible conducting polymer electrodes for at-home monitoring of salivary sex hormones. ACS Nano 17, 21935–21946 (2023). https://doi.org/10.1021/acsnano.3c0831510.1021/acsnano.3c08315 ↗
33. I. Muguet, A. Maziz, F. Mathieu, L. Mazenq, G. Larrieu, Combining PEDOT: PSS polymer coating with metallic 3D nanowires electrodes to achieve high electrochemical performances for neuronal interfacing applications. Adv. Mater. 35, e2302472 (2023). https://doi.org/10.1002/adma.20230247210.1002/adma.202302472 ↗
34. Z. Wang, M. Tian, J. Yu, J. Jiao, C. Yang et al., Recent advances of 3D compressible carbon assemblies: a review of synthesis, properties and applications in energy and environment. J. Environ. Chem. Eng. 9, 106269 (2021). https://doi.org/10.1016/j.jece.2021.10626910.1016/j.jece.2021.106269 ↗
35. A.G. El-Shamy, Review on the recent advance in PEDOT: PSS/Carbonic fillers based nanocomposite for flexible thermoelectric devices and sensors. Mater. Today Phys. 35, 101101 (2023). https://doi.org/10.1016/j.mtphys.2023.10110110.1016/j.mtphys.2023.101101 ↗
36. X. Xie, R. Guo, B. Yang, H. Li, F. Yang et al., Stencil-printed electrodes without current collectors and inactive additives on textiles for in-plane microsupercapacitors. J. Mater. Chem. A 9, 25042–25050 (2021). https://doi.org/10.1039/d1ta07302h10.1039/d1ta07302h ↗
37. B. Yang, J. Chen, S. Lei, R. Guo, H. Li et al., Spontaneous growth of 3D framework carbon from sodium citrate for high energy- and power-density and long-life sodium-ion hybrid capacitors. Adv. Energy Mater. 8, 1702409 (2018). https://doi.org/10.1002/aenm.20170240910.1002/aenm.201702409 ↗
38. R. Guo, Y. Yu, Z. Xie, X. Liu, X. Zhou et al., Matrix-assisted catalytic printing for the fabrication of multiscale, flexible, foldable, and stretchable metal conductors. Adv. Mater. 25, 3343–3350 (2013). https://doi.org/10.1002/adma.20130118410.1002/adma.201301184 ↗
39. J. Li, J. Cao, B. Lu, G. Gu, 3D-printed PEDOT: PSS for soft robotics. Nat. Rev. Mater. 8, 604–622 (2023). https://doi.org/10.1038/s41578-023-00587-510.1038/s41578-023-00587-5 ↗
40. W. Cheng, Y. Liu, Z. Tong, Y. Zhu, K. Cao et al., Micro-interfacial polymerization of porous PEDOT for printable electronic devices. EcoMat 5, e12288 (2023). https://doi.org/10.1002/eom2.1228810.1002/eom2.12288 ↗
41. T. Su, N. Liu, D. Lei, L. Wang, Z. Ren et al., Flexible MXene/bacterial cellulose film sound detector based on piezoresistive sensing mechanism. ACS Nano 16, 8461–8471 (2022). https://doi.org/10.1021/acsnano.2c0315510.1021/acsnano.2c03155 ↗
42. Y. Zheng, R. Yin, Y. Zhao, H. Liu, D. Zhang et al., Conductive MXene/cotton fabric based pressure sensor with both high sensitivity and wide sensing range for human motion detection and E-skin. Chem. Eng. J. 420, 127720 (2021). https://doi.org/10.1016/j.cej.2020.12772010.1016/j.cej.2020.127720 ↗
43. M. Liu, X. Pu, C. Jiang, T. Liu, X. Huang et al., Large-area all-textile pressure sensors for monitoring human motion and physiological signals. Adv. Mater. 29, 1703700 (2017). https://doi.org/10.1002/adma.20170370010.1002/adma.201703700 ↗
44. S. Wang, X. Du, Y. Luo, S. Lin, M. Zhou et al., Hierarchical design of waterproof, highly sensitive, and wearable sensing electronics based on MXene-reinforced durable cotton fabrics. Chem. Eng. J. 408, 127363 (2021). https://doi.org/10.1016/j.cej.2020.12736310.1016/j.cej.2020.127363 ↗
45. G. Tian, K. Xu, Y. Huang, X. You, W. Yu et al., An organic/inorganic coating strategy that greatly enhanced sensing performances and reliability of all-fabric piezoresistive sensors. J. Mater. Chem. A 11, 21333–21344 (2023). https://doi.org/10.1039/d3ta03415a10.1039/d3ta03415a ↗
46. J.V. Vaghasiya, C.C. Mayorga-Martinez, J. Vyskočil, M. Pumera, Black phosphorous-based human-machine communication interface. Nat. Commun. 14, 2 (2023). https://doi.org/10.1038/s41467-022-34482-410.1038/s41467-022-34482-4 ↗
47. Z. Yang, H. Li, S. Zhang, X. Lai, X. Zeng, Superhydrophobic MXene@carboxylated carbon nanotubes/carboxymethyl chitosan aerogel for piezoresistive pressure sensor. Chem. Eng. J. 425, 130462 (2021). https://doi.org/10.1016/j.cej.2021.13046210.1016/j.cej.2021.130462 ↗
48. M. Yang, Y. Cheng, Y. Yue, Y. Chen, H. Gao et al., High-performance flexible pressure sensor with a self-healing function for tactile feedback. Adv. Sci. 9, 2200507 (2022). https://doi.org/10.1002/advs.20220050710.1002/advs.202200507 ↗
49. S. Lee, S. Franklin, F.A. Hassani, T. Yokota, M.O.G. Nayeem et al., Nanomesh pressure sensor for monitoring finger manipulation without sensory interference. Science 370, 966–970 (2020). https://doi.org/10.1126/science.abc973510.1126/science.abc9735 ↗
50. K. Meng, X. Xiao, W. Wei, G. Chen, A. Nashalian et al., Wearable pressure sensors for pulse wave monitoring. Adv. Mater. 34, 2109357 (2022). https://doi.org/10.1002/adma.20210935710.1002/adma.202109357 ↗
51. C. Ozsancak, P. Auzou, K. Dujardin, N. Quinn, A. Destée, Orofacial apraxia in corticobasal degeneration, progressive supranuclear palsy, multiple system atrophy and Parkinson’s disease. J. Neurol. 251, 1317–1323 (2004). https://doi.org/10.1007/s00415-004-0530-010.1007/s00415-004-0530-0 ↗
52. G. Khodabandelou, P.-G. Jung, Y. Amirat, S. Mohammed, Attention-based gated recurrent unit for gesture recognition. IEEE Trans. Autom. Sci. Eng. 18, 495–507 (2021). https://doi.org/10.1109/TASE.2020.303085210.1109/TASE.2020.3030852 ↗
53. G. Tang, Q. Shi, Z. Zhang, T. He, Z. Sun et al., Hybridized wearable patch as a multi-parameter and multi-functional human-machine interface. Nano Energy 81, 105582 (2021). https://doi.org/10.1016/j.nanoen.2020.10558210.1016/j.nanoen.2020.105582 ↗
54. S.-D. Wu, S.-H. Hsu, B. Ketelsen, S.C. Bittinger, H. Schlicke et al., Fabrication of eco-friendly wearable strain sensor arrays via facile contact printing for healthcare applications. Small Meth. 7, 2300170 (2023). https://doi.org/10.1002/smtd.20230017010.1002/smtd.202300170 ↗