A Review of MAX Series Materials: From Diversity, Synthesis, Prediction, Properties Oriented to Functions
Source abstract
Abstract
Abstract MAX series materials, as non-van der Waals layered multi-element compounds, contribute remarkable regulated properties and functional dimension, combining the features of metal and ceramic materials due to their inherently laminated crystal structure that Mn+1Xn slabs are intercalated with A element layers. Oriented to the functional requirements of information, intelligence, electrification, and aerospace in the new era, how to accelerate MAX series materials into new quality productive forces? The systematic enhancement of knowledge about MAX series materials is intrinsic to understanding its low-dimensional geometric structure characteristics, and physical and chemical properties, revealing the correlation of composition, structure, and function and further realizing rational design based on simulation and prediction. Diversity also brings complexity to MAX materials research. This review provides substantial tabular information on (I) MAX’s research timeline from 1960 to the present, (II) structure diversity and classification convention, (III) synthesis route exploration, (IV) prediction based on theory and machine learning, (V) properties, and (VI) functional applications. Herein, the researchers can quickly locate research content and recognize connections and differences of MAX series materials. In addition, the research challenges for the future development of MAX series materials are highlighted.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: MXene and MAX Phase Materials · 2D Materials and Applications · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. M.W. Barsoum, The MN+1AXN phases: a new class of solids. Prog. Solid State Chem. 28, 201–281 (2000). https://doi.org/10.1016/s0079-6786(00)00006-610.1016/s0079-6786(00)00006-6 ↗
2. E. Drouelle, V. Gauthier-Brunet, J. Cormier, P. Villechaise, P. Sallot et al., Microstructure-oxidation resistance relationship in Ti3AlC2 MAX phase. J. Alloys Compd. 826, 154062 (2020). https://doi.org/10.1016/j.jallcom.2020.15406210.1016/j.jallcom.2020.154062 ↗
3. Z.H. Tian, P.G. Zhang, W.W. Sun, B.Z. Yan, Z.M. Sun, Vegard’s law deviating Ti2(SnxAl1−x)C solid solution with enhanced properties. J. Adv. Ceram. 12, 1655–1669 (2023). https://doi.org/10.26599/jac.2023.922077910.26599/jac.2023.9220779 ↗
4. M.W. Barsoum, T. ElRaghy, L. Ogbuji, Oxidation of Ti3SiC2 in air J. Electrochem. Soc. 144, 2508–2516 (1997). https://doi.org/10.1149/1.183784610.1149/1.1837846 ↗
5. S. Kuchida, T. Muranaka, K. Kawashima, K. Inoue, M. Yoshikawa et al., Superconductivity in Lu2SnC. Phys. C 494, 77–79 (2013). https://doi.org/10.1016/j.physc.2013.04.05010.1016/j.physc.2013.04.050 ↗
6. K. Chen, X. Bai, X. Mu, P. Yan, N. Qiu et al., MAX phase Zr2SeC and its thermal conduction behavior. J. Eur. Ceram. Soc. 41, 4447–4451 (2021). https://doi.org/10.1016/j.jeurceramsoc.2021.03.01310.1016/j.jeurceramsoc.2021.03.013 ↗
7. Z.M. Sun, Progress in research and development on MAX phases: a family of layered ternary compounds. Int. Mater. Rev. 56, 143–166 (2011). https://doi.org/10.1179/1743280410y.000000000110.1179/1743280410y.0000000001 ↗
8. M.W. Barsoum, T. ElRaghy, Synthesis and characterization of a remarkable ceramic: Ti3SiC2. J. Am. Ceram. Soc. 79, 1953–1956 (1996). https://doi.org/10.1111/j.1151-2916.1996.tb08018.x10.1111/j.1151-2916.1996.tb08018.x ↗
9. C. Magnus, J. Sharp, W.M. Rainforth, The lubricating properties of spark plasma sintered (SPS) Ti3SiC2 MAX phase compound and composite. Tribol. Trans. 63, 38–51 (2020). https://doi.org/10.1080/10402004.2019.165753410.1080/10402004.2019.1657534 ↗
10. N.P. Padture, M. Gell, E.H. Jordan, Thermal barrier coatings for gas-turbine engine applications. Science 296, 280–284 (2002). https://doi.org/10.1126/science.106860910.1126/science.1068609 ↗
11. D.D. Wang, W.B. Tian, J.X. Ding, A.B. Ma, Y.F. Zhu et al., Anisotropic arc erosion resistance of Ag/Ti3AlC2 composites induced by the alignment of Ti3AlC2. Corros. Sci. 171, 108633 (2020). https://doi.org/10.1016/j.corsci.2020.10863310.1016/j.corsci.2020.108633 ↗
12. X.C. Huang, Y. Feng, J.L. Ge, L. Li, Z.Q. Li et al., Arc erosion mechanism of Ag-Ti3SiC2 material. J. Alloys Compd. 817, 152741 (2020). https://doi.org/10.1016/j.jallcom.2019.15274110.1016/j.jallcom.2019.152741 ↗
13. P.W. Bai, S. Wang, B. Zhao, X.H. Wang, J.B. Ma et al., Electrically conductive and corrosion resistant MAX phases with superior electromagnetic wave shielding performance. J. Eur. Ceram. Soc. 42, 7414–7420 (2022). https://doi.org/10.1016/j.jeurceramsoc.2022.09.00910.1016/j.jeurceramsoc.2022.09.009 ↗
14. P. Yao, Y.H. Qian, W.C. Li, C.S. Li, J. Zuo et al., Exploration of dielectric and microwave absorption properties of quaternary MAX phase ceramic (Cr2/3Ti1/3)3AlC2. Ceram. Int. 46, 22919–22926 (2020). https://doi.org/10.1016/j.ceramint.2020.06.06510.1016/j.ceramint.2020.06.065 ↗
15. C.X. Wang, C.L. Tracy, R.C. Ewing, Radiation effects in Mn+1AXn phases. Appl. Phys. Rev. 7, 041311 (2020). https://doi.org/10.1063/5.001928410.1063/5.0019284 ↗
16. X.Q. Xu, D.W. Sha, Z.H. Tian, F.S. Wu, W. Zheng et al., Lithium storage performance and mechanism of nano-sized Ti2InC MAX phase. Nanoscale Horizons 8, 331–337 (2023). https://doi.org/10.1039/d2nh00489e10.1039/d2nh00489e ↗
17. Y.B. Li, G.L. Ma, H. Shao, P. Xiao, J. Lu et al., Electrochemical lithium storage performance of molten salt derived V2SnC MAX phase. Nano-Micro Lett. 13, 158 (2021). https://doi.org/10.1007/s40820-021-00684-610.1007/s40820-021-00684-6 ↗
18. X. Liu, M. Du, S. Zheng, T. Kar Ban, Z. Cuimei et al., Understand the effect of the confined trifluoromethane sulfonate (OTf−) anions by the adjacent MXene nanosheets on oriented design of Zn ion storage. Carbon 219, 118828 (2024). https://doi.org/10.1016/j.carbon.2024.11882810.1016/j.carbon.2024.118828 ↗
19. C. Zhou, K.B. Tan, W. Han, L. Wang, M. Lu, A review of MXene derived quantum dots: synthesis, characterization, properties and applications. Particuology 91, 50–71 (2024). https://doi.org/10.1016/j.partic.2023.12.01610.1016/j.partic.2023.12.016 ↗
20. Q.H. Gu, Y.Q. Cao, J.N. Chen, Y.J. Qi, Z.F. Zhai et al., Fluorine-modulated MXene-derived catalysts for multiphase sulfur conversion in lithium-sulfur battery. Nano-Micro Lett. 16, 266 (2024). https://doi.org/10.1007/s40820-024-01482-610.1007/s40820-024-01482-6 ↗
21. A.V. Mohammadi, J. Rosen, Y. Gogotsi, The world of two-dimensional carbides and nitrides (MXenes). Science 372, 1165 (2021). https://doi.org/10.1126/science.abf158110.1126/science.abf1581 ↗
22. H. Rohde, H. Kudielka, Strukturuntersuchungen an carbosulfiden von titan und zirkon. Z. Krist. Cryst. Mater. 114, 447–456 (1960). https://doi.org/10.1524/zkri.1960.114.16.44710.1524/zkri.1960.114.16.447 ↗
23. W. Jeitschko, H. Nowotny, F. Benesovsky, Carbides of formula T2MC*. Monatsh. Chem. 95, 33–38 (1963). https://doi.org/10.1016/0022-5088(64)90055-410.1016/0022-5088(64)90055-4 ↗
24. W. Jeitschko, H. Nowotny, F. Benesovsky, Kohlenstoffhaltige ternäre Verbindungen (H-Phase). Monatsh. Chem. 94, 672–676 (1963). https://doi.org/10.1007/BF0091306810.1007/BF00913068 ↗
25. W. Jeitschko, H. Nowotny, F. Benesovsky, Kohlenstoffhaltige ternare Verbindungen (V-GeC, Nb-Ga-C, Ta-Ga-C, Ta-Ge-C, Cr-Ga-C und Cr-Ge-C). Monatsh. Chem. 94, 844–850 (1963). https://doi.org/10.1007/bf0090235810.1007/bf00902358 ↗
26. W. Jeitschko, H. Nowotny, F. Benesovsky, Die H-Phasen Ti2InC, Zr2InC Hf2InC und Ti2GeC. Monatsh. Chem. 94, 1201–1205 (1963). https://doi.org/10.1007/bf0090571110.1007/bf00905711 ↗
27. J.J. Nickl, K.K. Schweitzer, P. Luxenberg, Gasphasenabscheidung im system Ti-Si-C. J. Less-Common Met. 26, 335–353 (1972). https://doi.org/10.1016/0022-5088(72)90083-510.1016/0022-5088(72)90083-5 ↗
28. M.A. Pietzka, J.C. Schuster, Summary of constitutional data on the aluminum-carbon-titanium system. J. Phase Equilib. 15, 392–400 (1994). https://doi.org/10.1007/BF0264755910.1007/BF02647559 ↗
29. J.P. Palmquist, S. Li, P. Persson, J. Emmerlich, O. Wilhelmsson et al., Mn+1AXn phases in the Ti-Si-C system studied by thin-film synthesis and ab initio calculations. Phys. Rev. B 70, 165401 (2004). https://doi.org/10.1103/PhysRevB.70.16540110.1103/PhysRevB.70.165401 ↗
30. Z. Lin, M. Zhuo, Y. Zhou, M. Li, J. Wang, Microstructures and theoretical bulk modulus of layered ternary tantalum aluminum carbides. J. Am. Ceram. Soc. 89, 3765–3769 (2006). https://doi.org/10.1111/j.1551-2916.2006.01303.x10.1111/j.1551-2916.2006.01303.x ↗
31. W.B. Tian, P.L. Wang, Y.M. Kan, G.J. Zhang, Cr2AlC powders prepared by molten salt method. J. Alloys Compd. 461, L5–L10 (2008). https://doi.org/10.1016/j.jallcom.2007.06.09410.1016/j.jallcom.2007.06.094 ↗
32. J. Zhang, B. Liu, J.Y. Wang, Y.C. Zhou, Low-temperature instability of Ti2SnC: A combined transmission electron microscopy, differential scanning calorimetry, and x-ray diffraction investigations. J. Mater. Res. 24, 39–49 (2009). https://doi.org/10.1557/jmr.2009.001210.1557/jmr.2009.0012 ↗
33. M. Naguib, M. Kurtoglu, V. Presser, J. Lu, J.J. Niu et al., Two-dimensional nanocrystals produced by exfoliation of Ti3AlC2. Adv. Mater. 23, 4248–4253 (2011). https://doi.org/10.1002/adma.20110230610.1002/adma.201102306 ↗
34. Z.M. Liu, E.D. Wu, J.M. Wang, Y.H. Qian, H.M. Xiang et al., Crystal structure and formation mechanism of (Cr2/3Ti1/3)3AlC2 MAX phase. Acta Mater. 73, 186–193 (2014). https://doi.org/10.1016/j.actamat.2014.04.00610.1016/j.actamat.2014.04.006 ↗
35. Q.Z. Tao, M. Dahlqvist, J. Lu, S. Kota, R. Meshkian et al., Two-dimensional Mo1.33C MXene with divacancy ordering prepared from parent 3D laminate with in-plane chemical ordering. Nat. Commun. 8, 14949 (2017). https://doi.org/10.1038/ncomms1494910.1038/ncomms14949 ↗
36. M. Li, J. Lu, K. Luo, Y. Li, K. Chang et al., Element replacement approach by reaction with lewis acidic molten salts to synthesize nanolaminated MAX phases and MXenes. J. Am. Chem. Soc. 141, 4730–4737 (2019). https://doi.org/10.1021/jacs.9b0057410.1021/jacs.9b00574 ↗
37. Y.B. Li, M. Li, J. Lu, B.K. Ma, Z.P. Wang et al., Single-atom-thick active layers realized in nanolaminated Ti3(AlxCu1–x)C2 and its artificial enzyme behavior. ACS Nano 13, 9198–9205 (2019). https://doi.org/10.1021/acsnano.9b0353010.1021/acsnano.9b03530 ↗
38. Y.B. Li, J. Lu, M. Li, K.K. Chang, X.H. Zha et al., Multielemental single–atom-thick A layers in nanolaminated V2(Sn, A)C (A = Fe Co, Ni, Mn) for tailoring magnetic properties. Proc. Natl. Acad. Sci. U.S.A. 117, 820–825 (2020). https://doi.org/10.1073/pnas.191625611710.1073/pnas.1916256117 ↗
39. Z. Du, C. Wu, Y. Chen, Z. Cao, R. Hu et al., High-entropy atomic layers of transition-metal carbides (MXenes). Adv. Mater. 33, 2101473 (2021). https://doi.org/10.1002/adma.20210147310.1002/adma.202101473 ↗
40. H.M. Ding, Y.B. Li, M. Li, K. Chen, K. Liang et al., Chemical scissor-mediated structural editing of layered transition metal carbides. Science 379, 1130–1135 (2023). https://doi.org/10.1126/science.add590110.1126/science.add5901 ↗
41. Y. Li, S. Zhu, J.-B. Le, J. Lu, X. Wang et al., A-site alloying-guided universal design of noble metal-based MAX phases. Matter 7, 1–16 (2024). https://doi.org/10.1016/j.matt.2023.12.00610.1016/j.matt.2023.12.006 ↗
42. Q.Z. Tao, J. Lu, M. Dahlqvist, A. Mockute, S. Calder et al., Atomically layered and ordered rare-earth i-MAX Phases: a new class of magnetic quaternary compounds. Chem. Mater. 31, 2476–2485 (2019). https://doi.org/10.1021/acs.chemmater.8b0529810.1021/acs.chemmater.8b05298 ↗
43. R. Meshkian, M. Dahlqvist, J. Lu, B. Wickman, J. Halim et al., W-based atomic laminates and their 2D derivative W1.33C MXene with vacancy ordering. Adv. Mater. 30, 1706409 (2018). https://doi.org/10.1002/adma.20170640910.1002/adma.201706409 ↗
44. J. Yang, R. Liu, N. Jia, K. Wu, X. Fu et al., Novel W-based in-plane chemically ordered (W2/3R1/3)2AlC (R = Gd, Tb, Dy, Ho, Er, Tm and Lu) MAX phases and their 2D W1.33C MXene derivatives. Carbon 183, 76–83 (2021). https://doi.org/10.1016/j.carbon.2021.07.01010.1016/j.carbon.2021.07.010 ↗
45. Z.X. Zhang, W.L. Wang, J.T. Zhang, J.Q. Chen, X.N. Sun et al., Influence of elements (Zr, Mo, Cr, Fe, and Ni) doping on the electromagnetic wave absorption performance of Ti3AlC2-based ceramics. Ceram. Int. 49, 28660–28673 (2023). https://doi.org/10.1016/j.ceramint.2023.06.12110.1016/j.ceramint.2023.06.121 ↗
46. G.W. Bentzel, M. Sokol, J. Griggs, A.C. Lang, M.W. Barsoum, On the interactions of Ti2AlC, Ti3AlC2, Ti3SiC2 and Cr2AlC with palladium at 900 °C. J. Alloys Compd. 771, 1103–1110 (2019). https://doi.org/10.1016/j.jallcom.2018.08.12710.1016/j.jallcom.2018.08.127 ↗
47. M. Nechiche, V. Gauthier-Brunet, V. Mauchamp, A. Joulain, T. Cabioc’h et al., Synthesis and characterization of a new (Ti1-ε, Cuε)3(Al, Cu)C2 MAX phase solid solution. J. Eur. Ceram. Soc. 37, 459–466 (2017). https://doi.org/10.1016/j.jeurceramsoc.2016.09.02810.1016/j.jeurceramsoc.2016.09.028 ↗
48. L. Zheng, Q. Hua, X. Li, M. Li, Y. Qian et al., Exploring a novel ceramic (Ti, W)3SiC2 for interconnect of intermediate temperature solid oxide fuel cell. Int. J. Hydrogen Energy 43, 7483–7491 (2018). https://doi.org/10.1016/j.ijhydene.2018.02.16210.1016/j.ijhydene.2018.02.162 ↗
49. L. Chen, Y.B. Li, B. Zhao, S.S. Liu, H.B. Zhang et al., Multiprincipal element M2FeC (M = Ti, V, Nb, Ta, Zr) MAX phases with synergistic effect of dielectric and magnetic loss. Adv. Sci. 10, 2206877 (2023). https://doi.org/10.1002/advs.20220687710.1002/advs.202206877 ↗
50. L. Chen, Y. Li, K. Chen, X. Bai, M. Li et al., Synthesis and characterization of medium-/high-entropy M2SnC (M=Ti/V/Nb/Zr/Hf) MAX phases. Small Struct. 4, 2200161 (2022). https://doi.org/10.1002/sstr.20220016110.1002/sstr.202200161 ↗
51. C.-C. Lai, Q. Tao, H. Fashandi, U. Wiedwald, R. Salikhov et al., Magnetic properties and structural characterization of layered (Cr0.5Mn0.5)2AuC synthesized by thermally induced substitutional reaction in (Cr0.5Mn0.5)2GaC. APL Mater. 6, 026104 (2018). https://doi.org/10.1063/1.500630410.1063/1.5006304 ↗
52. J. Lu, A. Thore, R. Meshkian, Q. Tao, L. Hultman et al., Theoretical and experimental exploration of a novel in-plane chemically ordered (Cr2/3M1/3)2AlC i-MAX Phase with M = Sc and Y. Cryst. Growth Des. 17, 5704–5711 (2017). https://doi.org/10.1021/acs.cgd.7b0064210.1021/acs.cgd.7b00642 ↗
53. K. Chen, Y. Chen, J. Zhang, Y. Song, X. Zhou et al., Medium-entropy (Ti, Zr, Hf)2SC MAX phase. Ceram. Int. 47, 7582–7587 (2020). https://doi.org/10.1016/j.ceramint.2020.11.09610.1016/j.ceramint.2020.11.096 ↗
54. H. Fashandi, M. Dahlqvist, J. Lu, J. Palisaitis, S.I. Simak et al., Synthesis of Ti3AuC2, Ti3Au2C2 and Ti3IrC2 by noble metal substitution reaction in Ti3SiC2 for high-temperature-stable Ohmic contacts to SiC. Nat. Mater. 16, 814–818 (2017). https://doi.org/10.1038/nmat489610.1038/nmat4896 ↗
55. Q.Q. Zhang, Y.C. Zhou, X.Y. San, D.T. Wan, Y.W. Bao et al., Thermal explosion synthesis of first Te-containing layered ternary Hf2TeB MAX phase. J. Eur. Ceram. Soc. 43, 173–176 (2023). https://doi.org/10.1016/j.jeurceramsoc.2022.09.05110.1016/j.jeurceramsoc.2022.09.051 ↗
56. H. Boller, H. Nowotny, Röntgenographische untersuchungen im system: Vanadin-Arsen-Kohlenstoff. Monatsh. Chem. 97, 1053–1058 (1966). https://doi.org/10.1007/BF0090355310.1007/BF00903553 ↗
57. O. Beckmann, H. Boller, H. Nowotny, Neue H-phasen. Monatsh. Chem. 99, 1580–1583 (1968). https://doi.org/10.1007/bf0090270910.1007/bf00902709 ↗
58. Y.B. Li, J.H. Liang, H.M. Ding, J. Lu, X.L. Mu et al., Near-room temperature ferromagnetic behavior of single-atom-thick 2D iron in nanolaminated ternary MAX phases. Appl. Phys. Rev. 8, 031418 (2021). https://doi.org/10.1063/5.005907810.1063/5.0059078 ↗
59. Z.Q. Li, E.X. Wu, K. Chen, X.D. Wang, G.X. Chen et al., Chalcogenide MAX phases Zr2Se(B1-xSex) (x = 0–0.97) and their conduction behaviors. Acta Mater. 237, 118183 (2022). https://doi.org/10.1016/j.actamat.2022.11818310.1016/j.actamat.2022.118183 ↗
60. J. Rosen, P.O.A. Persson, M. Ionescu, A. Kondyurin, D.R. McKenzie et al., Oxygen incorporation in Ti2AlC thin films. Appl. Phys. Lett. 92, 064102 (2008). https://doi.org/10.1063/1.283845610.1063/1.2838456 ↗
61. P.P. Michalowski, M. Anayee, T.S. Mathis, S. Kozdra, A. Wójcik et al., Oxycarbide MXenes and MAX phases identification using monoatomic layer-by-layer analysis with ultralow-energy secondary-ion mass spectrometry. Nat. Nanotechnol. 17, 1192 (2022). https://doi.org/10.1038/s41565-022-01214-010.1038/s41565-022-01214-0 ↗
62. B.K. Zhang, J. Zhou, Z.M. Sun, MBenes: progress, challenges and future. J. Mater. Chem. A 10, 15865–15880 (2022). https://doi.org/10.1039/d2ta03482d10.1039/d2ta03482d ↗
63. T. Rackl, L. Eisenburger, R. Niklaus, D. Johrendt, Syntheses and physical properties of the MAX phase boride Nb2SB and the solid solutions Nb2SBxC1-x (x = 0–1). Phys. Rev. Mater. 3, 054001 (2019). https://doi.org/10.1103/PhysRevMaterials.3.05400110.1103/PhysRevMaterials.3.054001 ↗
64. M. Ade, H. Hillebrecht, Ternary borides Cr2AlB2, Cr3AlB4, and Cr4AlB6: The first members of the series (CrB2)nCrAl with n = 1, 2, 3 and a unifying concept for ternary borides as MAB-phases. Inorg. Chem. 54, 6122–6135 (2015). https://doi.org/10.1021/acs.inorgchem.5b0004910.1021/acs.inorgchem.5b00049 ↗
65. V.I. Ivchenko, M.I. Lesnaya, V.F. Nemchenko, T.Y. Kosolapova, Preparation and some properties of the ternary compound Ti2AlN. Sov. Powder Metall. Met. Ceram. 15, 293–295 (1976). https://doi.org/10.1007/bf0117820010.1007/bf01178200 ↗
66. C.F. Hu, L.F. He, M.Y. Liu, X.H. Wang, J.Y. Wang et al., In situ reaction synthesis and mechanical properties of V2AlC. J. Am. Ceram. Soc. 91, 4029–4035 (2008). https://doi.org/10.1111/j.1551-2916.2008.02774.x10.1111/j.1551-2916.2008.02774.x ↗
67. G.B. Ying, X.D. He, M.W. Li, W.B. Han, F. He et al., Synthesis and mechanical properties of high-purity Cr2AlC ceramic. Mater. Sci. Eng. A 528, 2635–2640 (2011). https://doi.org/10.1016/j.msea.2010.12.03910.1016/j.msea.2010.12.039 ↗
68. T. Lapauw, K. Lambrinou, T. Cabioc’h, J. Halim, J. Lu et al., Synthesis of the new MAX phase Zr2AlC. J. Eur. Ceram. Soc. 36, 1847–1853 (2016). https://doi.org/10.1016/j.jeurceramsoc.2016.02.04410.1016/j.jeurceramsoc.2016.02.044 ↗
69. W. Zhang, N. Travitzky, C.F. Hu, Y.C. Zhou, P. Greil, Reactive hot pressing and properties of Nb2AlC. J. Am. Ceram. Soc. 92, 2396–2399 (2009). https://doi.org/10.1111/j.1551-2916.2009.03187.x10.1111/j.1551-2916.2009.03187.x ↗
70. C.F. Hu, L.F. He, J. Zhang, Y.W. Bao, J.Y. Wang et al., Microstructure and properties of bulk Ta2AlC ceramic synthesized by an in situ reaction/hot pressing method. J. Eur. Ceram. Soc. 28, 1679–1685 (2008). https://doi.org/10.1016/j.jeurceramsoc.2007.10.00610.1016/j.jeurceramsoc.2007.10.006 ↗
71. T. Lapauw, B. Tunca, T. Cabioc’h, J. Lu, P. Persson et al., Synthesis of MAX phases in the Hf-Al-C system. Inorg. Chem. 55, 10922–10927 (2016). https://doi.org/10.1021/acs.inorgchem.6b0139810.1021/acs.inorgchem.6b01398 ↗
72. H. Boller, H. Nowotny, Die kristallstruktur von V2PC und V5P3N. Monatsh. Chem. 99, 672–675 (1968). https://doi.org/10.1007/bf0090122010.1007/bf00901220 ↗
73. T. Rackl, D. Johrendt, The MAX phase borides Zr2SB and Hf2SB. Solid State Sci. 106, 106316 (2020). https://doi.org/10.1016/j.solidstatesciences.2020.10631610.1016/j.solidstatesciences.2020.106316 ↗
74. X. Wang, K. Chen, Z. Li, H. Ding, Y. Song et al., MAX phases Hf2(SexS1−x)C (x = 0–1) and their thermal expansion behaviors. J. Eur. Ceram. Soc. 43, 1874–1879 (2022). https://doi.org/10.1016/j.jeurceramsoc.2022.12.02610.1016/j.jeurceramsoc.2022.12.026 ↗
75. Y.B. Li, S.R. Zhu, E.R. Wu, H.M. Ding, J. Lu et al., Nanolaminated ternary transition metal carbide (MAX phase)-derived core-shell structure electrocatalysts for hydrogen evolution and oxygen evolution reactions in alkaline electrolytes. J. Phys. Chem. Lett. 14, 481–488 (2023). https://doi.org/10.1021/acs.jpclett.2c0323010.1021/acs.jpclett.2c03230 ↗
76. H.M. Ding, Y.B. Li, J. Lu, K. Luo, K. Chen et al., Synthesis of MAX phases Nb2CuC and Ti2(Al0.1Cu0.9)N by A-site replacement reaction in molten salts. Mater. Res. Lett. 7, 510–516 (2019). https://doi.org/10.1080/21663831.2019.167282210.1080/21663831.2019.1672822 ↗
77. W. Jeitschko, H. Nowotny, Die H-Phasen: Ti2CdC, Ti2GaC, Ti2GaN, Ti2InN, Zr2InN und Nb2GaC Monatsh. Chem. 95, 178–179 (1963). https://doi.org/10.1007/BF0090926410.1007/BF00909264 ↗
78. N. Kubitza, A. Reitz, A.-M. Zieschang, H. Pazniak, B. Albert et al., From MAX phase carbides to nitrides: synthesis of V2GaC, V2GaN, and the carbonitride V2GaC1–xNx. Inorg. Chem. 61, 10634–10641 (2022). https://doi.org/10.1021/acs.inorgchem.2c0020010.1021/acs.inorgchem.2c00200 ↗
79. O. Beckmann, H. Boller, H. Nowotny, Einige Komplexcarbide und-nitride in den Systemen Ti-{Zn, Cd, Hg}-{C, N} und Cr-Ga-N. Monatsh. Chem. 100, 1465–1470 (1969). https://doi.org/10.1007/BF0090015910.1007/BF00900159 ↗
80. A.S. Ingason, A. Petruhins, M. Dahlqvist, F. Magnus, A. Mockute et al., A nanolaminated magnetic phase: Mn2GaC. Mater. Res. Lett. 2, 89–93 (2014). https://doi.org/10.1080/21663831.2013.86510510.1080/21663831.2013.865105 ↗
81. W. Jeitschko, H. Nowotny, F. Benesovsky, Die H-phasen Ti2TIC, Ti2PbC, Nb2InC, Nb2SnC und Ta2GaC. Monatsh. Chem. 95, 431–435 (1964). https://doi.org/10.1007/BF0090130610.1007/BF00901306 ↗
82. W. Jeitschko, H. Nowotny, F. Benesovsky, Ternäre carbide und nitride in systemen: Übergangsmetall-Metametall-Kohlenstoff (Stickstoff). Monatsh. Chem. 95, 156–157 (1964). https://doi.org/10.1007/BF0090926110.1007/BF00909261 ↗
83. S.H. Li, Z.N. Yang, R. Khaledialidusti, S. Lin, J. Yu et al., High-throughput study and machine learning on MAX and MAB phases: new materials and fingerprints of superior lattice thermal conductivities. Acta Mater. 254, 119001 (2023). https://doi.org/10.1016/j.actamat.2023.11900110.1016/j.actamat.2023.119001 ↗
84. A. Bouhemadou, Calculated structural, electronic and elastic properties of M2GeC (M=Ti, V, Cr, Zr, Nb, Mo, Hf, Ta and W). Appl. Phys. A Mater. Sci. Process. 96, 959–967 (2009). https://doi.org/10.1007/s00339-009-5106-510.1007/s00339-009-5106-5 ↗
85. Q.Q. Zhang, Y.C. Zhou, X.Y. San, W.B. Li, Y.W. Bao et al., Zr2SeB and Hf2SeB: Two new MAB phase compounds with the Cr2AlC-type MAX phase (211 phase) crystal structures. J. Adv. Ceram. 11, 1764–1776 (2022). https://doi.org/10.1007/s40145-022-0646-710.1007/s40145-022-0646-7 ↗
86. X.D. Wang, K. Chen, E.X. Wang, Y.M. Zhang, H.M. Ding et al., Synthesis and thermal expansion of chalcogenide MAX phase Hf2SeC. J. Eur. Ceram. Soc. 42, 2084–2088 (2021). https://doi.org/10.1016/j.jeurceramsoc.2021.12.06210.1016/j.jeurceramsoc.2021.12.062 ↗
87. Y.B. Li, Y.Q. Qin, K. Chen, L. Chen, X. Zhang et al., Molten salt synthesis of nanolaminated Sc2SnC MAX phase. J. Inorg. Mater. 36, 773–778 (2021). https://doi.org/10.15541/jim2020052910.15541/jim20200529 ↗
88. M.W. Barsoum, G. Yaroschuk, S. Tyagi, Fabrication and characterization of M2SnC (M = Ti, Zr, Hf and Nb). Scr. Mater. 37, 1583–1591 (1997). https://doi.org/10.1016/S1359-6462(97)00288-110.1016/S1359-6462(97)00288-1 ↗
89. Q. Xu, Y.C. Zhou, H.M. Zhang, A.N. Jiang, Q.Z. Tao et al., Theoretical prediction, synthesis, and crystal structure determination of new MAX phase compound V2SnC. J. Adv. Ceram. 9, 481–492 (2020). https://doi.org/10.1007/s40145-020-0391-810.1007/s40145-020-0391-8 ↗
90. A. Roumili, Y. Medkour, D. Maouch, Elastic and electronic properties of Hf2SnC and Hf2SnN. Int. J. Mod. Phys. B 26, 5155–5161 (2009). https://doi.org/10.1142/s021797920905337010.1142/s0217979209053370 ↗
91. H. Boller, Gemischte Pnictide mit geordnetem TiP-Typ (Ti2SC-Typ)*. Monatsh. Chem. 104, 166–171 (1973). https://doi.org/10.1007/BF0091115710.1007/BF00911157 ↗
92. C.-C. Lai, H. Fashandi, J. Lu, J. Palisaitis, P.O.Å. Persson et al., Phase formation of nanolaminated Mo2AuC and Mo2(Au1–xGax)2C by a substitutional reaction within Au-capped Mo2GaC and Mo2Ga2C thin films. Nanoscale 9, 17681–17687 (2017). https://doi.org/10.1039/c7nr03663a10.1039/c7nr03663a ↗
93. Q.Q. Zhang, B. Wen, J. Luo, Y.C. Zhou, X.Y. San et al., Synthesis of new rare earth containing ternary laminar Sc2PbC ceramic. J. Eur. Ceram. Soc. 43, 1735–1739 (2023). https://doi.org/10.1016/j.jeurceramsoc.2022.11.05610.1016/j.jeurceramsoc.2022.11.056 ↗
94. J.C. Schuster, H. Nowotny, C. Vaccaro, The ternary systems: Cr-Al-C, V-Al-C, and Ti-Al-C and the behavior of H-phases (M2AlC). J. Solid State Chem. 32, 213–219 (1980). https://doi.org/10.1016/0022-4596(80)90569-110.1016/0022-4596(80)90569-1 ↗
95. B. Tunca, T. Lapauw, O.M. Karakulina, M. Batuk, T. Cabioc’h et al., Synthesis of MAX phases in the Zr-Ti-Al-C system. Inorg. Chem. 56, 3489–3498 (2017). https://doi.org/10.1021/acs.inorgchem.6b0305710.1021/acs.inorgchem.6b03057 ↗
96. I. Salama, T. El-Raghy, M.W. Barsoum, Synthesis and mechanical properties of Nb2AlC and (Ti, Nb)2AlC. J. Alloys Compd. 347, 271–278 (2002). https://doi.org/10.1016/s0925-8388(02)00756-910.1016/s0925-8388(02)00756-9 ↗
97. R. Pan, J. Zhu, Y. Liu, Synthesis, microstructure and properties of (Ti1–x, Mox)2AlC phases. Mater. Sci. Technol. 34, 1064–1069 (2018). https://doi.org/10.1080/02670836.2017.141961410.1080/02670836.2017.1419614 ↗
98. S. Sridharan, H. Nowotny, Studies in the ternary system Ti-Ta-Al and in the quaternary system Ti-Ta-Al-C. Z. Metallkd. 74, 468–472 (1983). https://doi.org/10.1515/ijmr-1983-74071110.1515/ijmr-1983-740711 ↗
99. L. Wei, L. Yi, W. Chuangye, Z. Dan, Y. Xiaoyan et al., Sacrificial template synthesis of (V0.8Ti0.1Cr0.1)2AlC and carbon fiber@(V0.8Ti0.1Cr0.1)2AlC microrods for efficient microwave absorption. J. Mater. Sci. Technol. 111, 236–244 (2021). https://doi.org/10.1016/j.jmst.2021.10.01810.1016/j.jmst.2021.10.018 ↗
100. G.Q. He, Y. Zhang, P. Yao, X.C. Li, K. Ma et al., A novel medium-entropy (TiVNb)2AlC MAX phase: Fabrication, microstructure, and properties. J. Mater. Sci. Technol. 137, 91–99 (2022). https://doi.org/10.1016/j.jmst.2022.07.03710.1016/j.jmst.2022.07.037 ↗