Challenges and perspectives of NASICON-type solid electrolytes for all-solid-state lithium batteries
Source abstract
Abstract
Abstract NASICON-type (lithium super ionic conductor) solid electrolyte is of great interest because of its high ionic conductivity, wide potential window, and good chemical stability. In this paper, the key problems and challenges of NASICON-type solid electrolyte are described from the aspects of ionic conductivity, electrode interface, and electrochemical stability. Firstly, the migration mechanism of lithium ion is analyzed from the three-dimensional structure of NASICON-type solid electrolyte, and progress in the research of conductivity and stability is summarized. Then, the effective methods to reduce interface impedance and improve the cycle stability of all-solid-state lithium batteries (ASSLBs) with NASICON-type solid electrolyte are introduced. Finally, solutions to improve the conductivity of electrolytes and deal with electrode/electrolyte interface problems are summarized, and the development prospects of ASSLBs are discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Ageing mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.01.006 ↗
2. Advances in lithium-ion batteries10.1021/ja025282c ↗
3. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
4. A Metal-organic framework-derived bifunctional catalyst for hybrid sodium-air batteries10.1016/j.apcatb.2018.09.063 ↗
5. Preparation of nickel nanoparticles by direct current arc discharge method and their catalytic application in hybrid Na-air battery10.3390/nano8090684 ↗
6. Novel high-energy-density rechargeable hybrid sodium-air cell with acidic electrolyte10.1021/acsami.8b04278 ↗
7. Research progress of metallic carbon dioxide batteries10.6023/A18030125 ↗
8. A liquid anode for rechargeable sodium-air batteries with low voltage gap and high safety10.1016/j.nanoen.2018.04.074 ↗
9. Dual-phase spinel MnCo2O4 nanocrystals with nitrogen-doped reduced graphene oxide as potential catalyst for hybrid Na-air batteries10.1016/j.electacta.2017.05.100 ↗
10. Liquid exfoliation graphene sheets as catalysts for hybrid sodium-air cells10.1016/j.matlet.2016.10.054 ↗
11. Waste-to-resource strategy to fabricate highly porous whisker-structured mullite ceramic membrane for simulated oil-in-water emulsion wastewater treatment10.1021/acssuschemeng.5b01519 ↗
12. High energy-density mixed-aprotic-aqueous sodium-air cell with a ceramic separator and a porous carbon electrode10.1149/2.0421507jes ↗
13. Dual substitution strategy to enhance Li+ ionic conductivity in Li7La3Zr2O12 solid electrolyte10.1021/acs.chemmater.6b05369 ↗
14. Fast lithium ion conduction in garnet-type Li7La3Zr2O1210.1002/anie.200701144 ↗
15. Garnet-type fast Li-ion conductors with high ionic conductivities for all-solid-state batteries10.1021/acsami.7b00614 ↗
16. Candidate compounds with perovskite structure for high lithium ionic conductivity10.1016/0167-2738(94)90309-3 ↗
17. Synthesis and characterization of substituted garnet and perovskite-based lithium-ion conducting solid electrolytes10.1007/s11581-015-1556-2 ↗
18. High Li+-conductive perovskite Li3/8Sr7/16Ta3/4Zr1/4O3 electrolyte prepared by hot-pressing for all-solid-state Li-ion batteries10.1016/j.ssi.2019.04.010 ↗
19. A new ultrafast superionic Li-conductor: ion dynamics in Li11Si2PS12 and comparison with other tetragonal LGPS-type electrolytes10.1039/C4CP02046D ↗
20. A sulphide lithium super ion conductor is superior to liquid ion conductors for use in rechargeable batteries10.1039/C3EE41655K ↗
21. High-power all-solid-state batteries using sulfide superionic conductors10.1038/nenergy.2016.30 ↗
22. Preparation and properties of NASICON ceramic with different composition
23. NASICON-type La3+ substituted LiZr2 (PO4)3 with improved ionic conductivity as solid electrolyte10.1016/j.electacta.2018.03.115 ↗
24. Preparation and electrical properties of NASICON-type structured Li1.4Al0.4Ti1.6(PO4)3 glass-ceramics by the citric acid-assisted sol–gel method10.1016/j.ssi.2006.11.009 ↗
25. Thermal properties and ionic conductivity of Li1.3Ti1.7Al0.3(PO4)3 solid electrolytes sintered by field-assisted sintering10.1007/s11581-015-1628-3 ↗
26. NASICON-type Li1+2xZr2−xCax(PO4)3 with high ionic conductivity at room temperature10.1039/c1ra00383f ↗
27. Effect of simultaneous addition of aluminum and chromium on the lithium ionic conductivity of LiGe2(PO4)3 NASICON-type glass-ceramics10.1016/j.ssi.2016.03.012 ↗
28. Preparation and characterization of the porous solid polymer electrolyte of PAN/PVA by phase inversion10.1007/s10800-015-0816-1 ↗
29. An all-solid-state-supercapacitor possessing a non-aqueous gel polymer electrolyte prepared using a UV-assisted in situ polymerization strategy10.1039/C7TA01514C ↗
30. Preparation and performance evaluation of organophilic nano-montmorillonite conducting polymer electrolyte for all-solid-state lithium ion batteries10.1007/s10854-018-0474-2 ↗
31. Computational screening and first-principles investigations of NASICON-type LixM2(PO4)3 as solid electrolytes for Li batteries10.1039/C7TA08968F ↗
32. NASICON-type La3+ substituted LiZr2(PO4)3 with improved ionic conductivity as solid electrolyte10.1016/j.electacta.2018.03.115 ↗
33. Fast Na+-ion transport in skeleton structures10.1016/0025-5408(76)90077-5 ↗
34. Recent progress in solid oxide and lithium ion conducting electrolytes research10.1007/s11581-006-0013-7 ↗
35. Improved lithium-ion transport in NASICON-type lithium titanium phosphate by calcium and iron doping10.1016/j.ssi.2013.09.012 ↗
36. Correlation between micro-structural properties and ionic conductivity of Li1.5Al0.5Ge1.5(PO4)3 ceramics10.1016/j.jpowsour.2011.03.065 ↗
37. Single-phase all-solid-state lithium battery based on Li1.5Cr0.5Ti1.5(PO4)3 for high rate capability and low temperature operation10.1039/C8CC00734A ↗
38. Unique rhombus-like precursor for synthesis of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte with high ionic conductivity10.1016/j.cej.2018.03.151 ↗
39. Enhancing lithium-ion conductivity in NASICON glass-ceramics by adding yttria10.1039/C7CE01910F ↗
40. Facile synthesis and electrochemical properties of high lithium ionic conductivity Li1.7Al0.3Ti1.7Si0.4P2.6O12 ceramic solid electrolyte10.1016/j.jallcom.2018.04.333 ↗
41. Ionic conduction and crystal structure of aluminum doped NASICON-type LiGe2(PO4)3 glass-ceramic crystallized at different times and temperatures10.1007/s10832-018-0118-1 ↗
42. Comparison of a high lithium-ion conductivity solid electrolyte prepared by two methods10.1088/1757-899X/274/1/012046 ↗
43. The effects of the addition of silica mol fraction (x = 1.5; 2; 2.5) as a solid electrolyte on ion conductivity of NASICON (Na1−xZr2SixP3−xO12) using solid-state method10.1088/1757-899X/202/1/012083 ↗
44. Surface modification of LiCoO2 by NASICON-Type ceramic materials for lithium ion batteries10.1166/jnn.2017.13737 ↗
45. Preparation of the Li1.5Al0.5Ge1.5(PO4)3 solid electrolyte with high ionic conductivity10.1134/S2075113317020137 ↗
46. A facile and scalable process to synthesize flexible lithium ion conductive glass-ceramic fibers10.1039/C8RA08401G ↗
47. Preparation and evaluation of high lithium ion conductivity Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte obtained using a new solution method10.1016/j.ssi.2016.07.010 ↗
48. Thermal and ionic conductivity studies of lithium aluminum germanium phosphate solid-state electrolyte10.1016/j.ssi.2016.03.007 ↗
49. High lithium ion conductivity solid electrolyte of chromium and aluminum co-doped NASICON-type LiTi2(PO4)310.1016/j.ssi.2015.01.004 ↗
50. Synthesis of NASICON-type Li1.15Y0.15Zr1.85(PO4)3 solid electrolyte by sol-gel method
51. Properties of aerosol deposited NASICON-type Li1.5Al0.5Ge1.5(PO4)3 solid electrolyte thin films10.1016/j.ceramint.2015.05.062 ↗
52. Preparation, structural characterization and ionic conductivity studies of calcium doped LiZr2(PO4)310.1142/9789814415040_0052 ↗
53. High lithium ion conducting solid electrolytes based on NASICON Li1+xAlxM2−x(PO4)3 materials (M = Ti, Ge and 0 ≤ x ≤ 0.5)10.1016/j.jeurceramsoc.2014.11.023 ↗
54. Influence of crystallization temperature on ionic conductivity of lithium aluminum germanium phosphate glass-ceramic10.1016/j.jpowsour.2015.04.170 ↗
55. Effect of VO4 3− substitution for PO4 3− on electrical conductivity in the Nasicon Li3Sc2(PO4)3 compound10.1016/j.electacta.2015.06.047 ↗
56. Spectroscopic characterization and conductivity of Sn-substituted LiTi2(PO4)310.1007/s11164-014-1532-x ↗
57. Water-stable lithium ion conducting solid electrolyte of iron and aluminum doped NASICON-type LiTi2(PO4)310.1016/j.ssi.2014.04.017 ↗
58. The preparation and lithium mobility of zinc based NASICON-type solid electrolyte Li1+2x+2yAlxZnyTi2−x-ySixP3−xO1210.1016/j.ceramint.2013.08.043 ↗
59. Increase in grain boundary ionic conductivity of Li1.5Al0.5Ge1.5(PO4)3 by adding excess lithium10.1016/j.ssi.2014.05.016 ↗
60. A systematic study of Nasicon-type Li1+xMxTi2−x(PO4)3 (M: Cr, Al, Fe) by neutron diffraction and impedance spectroscopy10.1016/j.ssi.2014.07.018 ↗
61. Low-temperature sintering effects on NASICON-structured LiSn2P3O12 solid electrolytes prepared via citric acid-assisted sol–gel method
62. Preparation of lithium ion conducting solid electrolyte of NASICON-type Li1+xAlxTi2−x(PO4)3 (x = 0.3) obtained by using the mechanochemical method and its application as surface modification materials of LiCoO2 cathode for lithium cell10.1016/j.jpowsour.2013.05.039 ↗
63. Structural and electrical properties of NASICON type solid electrolyte nanoscaled glass-ceramic powder by mechanical milling for thin film batteries10.1166/jnn.2013.7240 ↗
64. The determination of Li+ mobility in solid electrolyte; Li1.3Al0.1Zn0.1Ti1.8P3O12 in view of ionic diffusivity and conductivity10.1007/s11581-012-0805-x ↗
65. Influence of chromium content on the optical and electrical properties of Li1+xCrxTi2−x(PO4)310.1016/j.ssi.2013.04.001 ↗
66. Preparation and characterization of Li1.4Al0.4Ti1.6(PO4)3 conducting electrolyte
67. High-temperature X-ray analysis of phase evolution in lithium ion conductor Li1.5Al0.5Ge1.5(PO4)310.1016/j.matchar.2013.03.012 ↗
68. Degradation of NASICON-type materials in contact with lithium metal: formation of mixed conducting interphases (MCI) on solid electrolytes10.1021/jp4051275 ↗
69. Preparation and characterization of NASICON type Li+ ionic conductors10.1007/s10008-012-1780-x ↗
70. Effect of microstructure on the conductivity of a NASICON-type lithium ion conductor10.1016/j.ssi.2010.01.005 ↗
71. Electrochemical properties of Li1.4Al0.4Ti1.6(PO4)3 synthesized by a co-precipitation method10.1016/j.jpowsour.2010.11.140 ↗
72. Synthesis and Li-Ion transport mechanism of Li1.4[M0.4N1.6](PO4)3 electrolyte10.1149/1.3495850 ↗
73. Electrochemical properties of Li symmetric solid-state cell with NASICON-type solid electrolyte and electrodes10.1016/j.elecom.2010.04.014 ↗
74. Lithium ion-conducting glass-ceramics of Li1.5Al0.5Ge1.5(PO4)3−xLi2O (x = 0.0-0.20) with good electrical and electrochemical properties10.1111/j.1551-2916.2007.01827.x ↗
75. Microstructure and ionic conductivity of Li1+x AlxTi2−x(PO4)3 NASICON glass-ceramics10.1016/j.ssi.2010.05.010 ↗
76. Phase stability and ionic conductivity of solid solutions with NASICON structure10.1111/j.1551-2916.2008.02300.x ↗
77. Lithium storage capability of lithium ion conductor Li1.5Al0.5Ge1.5(PO4)310.1016/j.jallcom.2010.04.084 ↗
78. Preparation, microstructure and electrical properties of Li1.4Al0.4Ti1.6(PO4)3 nanoceramics10.1007/s10832-008-9420-7 ↗
79. Dense nanostructured solid electrolyte with high Li-ion conductivity by spark plasma sintering technique10.1016/j.materresbull.2007.08.007 ↗
80. Lithium conductivity and lithium diffusion in NASICON-type Li1+xTi2−xAlx(PO4)3 (x = 0; 0.3) prepared by mechanical activation10.1007/s11581-007-0197-5 ↗
81. Structural and electrical conductivity studies of LixAlZr(PO4)3 (x = 1.8, 2.0, 2.2), solid electrolyte for lithium-rechargeable batteries10.1007/s10008-008-0520-8 ↗
82. Preparation, characterization and conductivity studies of Li3-2xAl2−xSbx(PO4)310.1007/s12034-008-0023-3 ↗
83. Preparation of high lithium-ion conductive ceramic10.4028/www.scientific.net/MSF.544-545.1033 ↗
84. Unexpected cationic distribution in tetrahedral/octahedral sites in nominal Li1+xAlxGe2−x(PO4)3 NASICON series10.1016/j.ssi.2006.11.016 ↗
85. Effect of the lattice volume on the Al3+ ion conduction in NASICON type solid electrolyte10.1016/j.ssi.2005.02.028 ↗
86. Synthesis and characterization of Y3+, S6+-doped mineral lithium fast ion conductor Li1.2+x-yYxTi1.9-xAl0.1Si0.1SyP2.9−yO12 system
87. Inorganic solid-state electrolytes for lithium batteries: mechanisms and properties governing ion conduction10.1021/acs.chemrev.5b00563 ↗
88. Lithium-ion trapping from local structural distortions in sodium super ionic conductor (NASICON) electrolytes10.1021/cm5013872 ↗
89. Relationship between activation energy and bottleneck size for Li+ ion conduction in NASICON materials of composition LiMM ‘(PO4)3; M, M’ =Ge, Ti, Sn, Hf10.1021/jp973296c ↗
90. Ionic Conductivity of solid electrolytes based on lithium titanium phosphate10.1002/chin.199025008 ↗
91. Lithium ion conductors in the system AB(IV)2(PO4)3 (B = Ti, Zr and Hf)10.1016/0167-2738(86)90179-7 ↗
92. La-doped LiTi2(PO4)3 ceramics10.1016/j.ssi.2007.12.025 ↗
93. Superionic conductivity of glass-ceramics in the system Li2O-Al2O3-TiO2-P2O510.1016/S0167-2738(97)00018-0 ↗
94. Preparation of lithium ion conducting solid electrolyte of NASICON-type Li1+xAlxTi2−x(PO4)3 (x = 0.3) obtained by using the mechanochemical method and its application as surface modification materials of LiCoO2 cathode for lithium cell10.1016/j.jpowsour.2013.05.039 ↗
95. Lithium ion-conducting glass-ceramics of Li1.5Al0.5Ge1.5(PO4)3−xLi2O (x = 0.0–0.20) with good electrical and electrochemical properties10.1111/j.1551-2916.2007.01827.x ↗
96. Ionic conductivity and sinterability of lithium titanium phosphate system10.1016/0167-2738(90)90282-V ↗
97. Electronegativity identification of novel superhard materials10.1103/PhysRevLett.100.235504 ↗
98. Solution-Phase electronegativity scale: insight into the chemical behaviors of metal ions in solution10.1021/jp300603f ↗
99. Materials chemistry toward electrochemical energy storage10.1039/C6TA01527A ↗
100. Magnetron sputtering preparation of nitrogen-incorporated lithium-aluminum-titanium phosphate based thin film electrolytes for all-solid-state lithium ion batteries10.1021/jp207120s ↗