journal article·2020-01-24

Facile fabrication of highly exothermic CuO@Al nanothermites via self-assembly approach

Qihui Wang, Youcai Ma, Yali Wang, Hebin Bao, Anqi Li, Peng Xu, Xueming Li, Wenjing Yang

Nanotechnology· Volume 31· Issue 5
Publisher page

Abstract

Abstract CuO@Al nanothermites with Al shell and CuO core were successfully fabricated via a simple self-assembly route. The composition and morphology of CuO@Al nanothermites were analyzed by x-ray diffraction and field-emission scanning electron microscopy in detail. When the equivalence ratio was 1.0, the heat output of CuO@Al nanothermites reached 1252 J g −1 , which was significantly larger than that of the Al/CuO prepared by ultrasonic mixing. The greatest heat output of CuO@Al nanothermites reached 1860 J g −1 , demonstrating outstanding exothermic properties, which ascribed to their unique core–shell structure. This study provides a new strategy about the design and advancement of highly exothermic nanothermites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Chemical and Physical Properties of Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Assembly and reactive properties of Al/CuO based nanothermite microparticles10.1016/j.combustflame.2014.02.003 ↗
2. Nanothermites: a short review. factsheet for experimenters, present and future challenges10.1002/prep.201800095 ↗
3. Two decades of research on nano-energetic materials10.1002/prep.201480151 ↗
4. High-energy Al/CuO nanocomposites obtained by DNA-directed assembly10.1002/adfm.201100763 ↗
5. Reaction characteristics of Al/Fe2O3 nanocomposites10.1016/j.jiec.2012.04.003 ↗
6. Thermal properties and kinetics of Al/α-MnO2 nanostructure thermite10.21577/0103-5053.20170154 ↗
7. Dependence of flame propagation on pressure and pressurizing gas for an Al/CuO nanoscale thermite10.1016/j.proci.2008.06.191 ↗
8. Combustion characteristics of physically mixed 40 nm aluminum/copper oxide nanothermites using laser ignition10.3389/fchem.2018.00465 ↗
9. Nanoenergetic gas-generators: principles and applications10.1039/c1jm11300c ↗
10. Facile aerosol route to hollow CuO spheres and its superior performance as an oxidizer in nanoenergetic gas generators10.1002/adfm.201202100 ↗
11. 3D ordered macroporous NiO/Al nanothermite film with significantly improved higher heat output, lower ignition temperature and less gas production10.1016/j.matdes.2016.08.002 ↗
12. Reactive structural materials consolidated by cold spray: Al-CuO thermite10.1016/j.surfcoat.2013.03.036 ↗
13. Investigation of Al/CuO multilayered thermite ignition10.1063/1.4974288 ↗
14. Fast circuit breaker based on integration of Al/CuO nanothermites10.1016/j.sna.2018.02.044 ↗
15. Characterization of Al/CuO nanoenergetic multilayer films integrated with semiconductor bridge for initiator applications10.1063/1.4804315 ↗
16. Highly stable functionalized aluminum nanoparticles for magneto-energetic composite fabrication10.1016/j.combustflame.2017.09.014 ↗
17. Facile preparation and energetic characteristics of core–shell Al/CuO metastable intermolecular composite thin film on a silicon substrate10.1016/j.cej.2017.07.092 ↗
18. Tuning energetic material reactivity using surface functionalization of aluminum fuels10.1021/jp308620t ↗
19. Core/shell CuO/Al nanorod thermite film based on electrochemical anodization10.1088/1361-6528/aacc57 ↗
20. Si wire supported MnO2/Al/fluorocarbon 3D core/shell nanoenergetic arrays with long-term storage stability10.1038/s41598-017-07148-1 ↗
21. Integration of nano-Al with Co3O4 nanorods to realize high-exothermic core–shell nanoenergetic materials on a silicon substrate10.1016/j.combustflame.2012.01.022 ↗
22. High heating rate reaction dynamics of Al/CuO nanolaminates by nanocalorimetry-coupled time-of-flight mass spectrometry10.1021/acs.jpcc.6b11114 ↗
23. Diversity in addressing reaction mechanisms of nano-thermite composites with a layer by layer structure10.1002/adem.201700822 ↗
24. Experimental and modeling investigation on the self-propagating combustion behavior of Al-MoO3 reactive multilayer films10.1063/1.5031068 ↗
25. Engineering of Al/CuO reactive multilayer thin films for tunable initiation and actuation10.1002/prep.201800045 ↗
26. Reactive multilayers fabricated by vapor deposition: a critical review10.1016/j.tsf.2014.09.042 ↗
27. Heat of combustion of tantalum-tungsten oxide thermite composites10.1016/j.combustflame.2010.07.002 ↗
28. Nanoenergetic materials for MEMS: a review10.1109/JMEMS.2007.893519 ↗
29. Controllable synthesis of NiCo2O4/Al core–shell nanowires thermite film with excellent heat release and short ignition time10.1016/j.matdes.2018.06.025 ↗
30. The super-hydrophobic thermite film of the Co3O4/Al core/shell nanowires for an underwater ignition with a favorable aging-resistance10.1016/j.cej.2017.12.129 ↗
31. Magnetron sputtered Al-CuO nanolaminates: effect of stoichiometry and layers thickness on energy release and burning rate10.1002/prep.201300080 ↗
32. Multilayered Al/CuO thermite formation by reactive magnetron sputtering: nano versus micro10.1063/1.3498821 ↗
33. Enhanced energy performance from core–shell structured Al@Fe2O3 nanothermite fabricated by atomic layer deposition10.1039/C6RA25251F ↗
34. Core–shell-structured nanothermites synthesized by atomic layer deposition10.1007/s11051-013-2150-z ↗
35. Core–shell Al-polytetrafluoroethylene (PTFE) configurations to enhance reaction kinetics and energy performance for nanoenergetic materials10.1002/chem.201503850 ↗
36. Highly exothermic and superhydrophobic Mg/fluorocarbon core/shell nanoenergetic arrays10.1021/am502078e ↗
37. Nanoenergetic composites of CuO nanorods, nanowires, and Al-nanoparticles10.1002/prep.200800212 ↗
38. Facile synthesis of CuO hollow nanospheres assembled by nanoparticles and their electrochemical performance10.1016/j.apsusc.2011.08.127 ↗
39. Formation of hollow Ni2P nanoparticles based on the nanoscale kirkendall effect10.1021/ic061846s ↗
40. Improved pressure discharge property of surface modified Al/Bi2O3 composites10.1134/S1070427217080237 ↗
41. Understanding the mechanism of poly(3-hexylthiophene)-b-poly(4-vinylpyridine) as a nanostructuring compatibilizer for improving the performance of poly(3-hexylthiophene)/ZnO-based hybrid solar cells10.1039/c3ta11869j ↗