journal article·2018-11-02

Size-tunable Ag nanoparticles sensitized porous ZnO nanobelts: controllably partial cation-exchange synthesis and selective sensing toward acetic acid

Gang Li, Yao Su, Yong-Yu Li, Yi-Xiang Li, Zheng Guo, Xing-Jiu Huang, Jin-Huai Liu

Nanotechnology· Volume 29· Issue 44
Publisher page

Abstract

Abstract Porous ZnO nanobelts sensitized with Ag nanoparticles have been prepared via a partial cation-exchange reaction assisted by a thermal oxidation treatment, employing ZnSe·0.5N 2 H 4 nanobelts as precursors. After partially exchanged with Ag + cations, the belt-like morphology of the precursors is still preserved. Continuously calcined in air, they are in situ transformed into Ag nanoparticles sensitized porous ZnO nanobelts. The size of the Ag nanoparticles can be tuned through manipulating the amount of exchanging Ag + cations. Considering the porous and belt-like nanostructure, sensing characteristics of ZnO and the catalytic activity of Ag nanoparticles, the gas sensing performances of the as-prepared Ag nanoparticles sensitized porous ZnO nanobelts have been carefully investigated. The results indicate that Ag nanoparticles significantly enhance the sensing performances of porous ZnO nanobelts toward typical volatile organic compounds. Especially, a good selectivity has been demonstrated toward acetic acid gas with a low detection limit less than 1 ppm. Furthermore, they also display a good reproducibility with a short response/recovery time due to the thin, uniform and porous sensing film, which is fabricated with the assembled technique and in situ calcined approach. Finally, their sensing mechanism has been further discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · ZnO doping and properties · Analytical Chemistry and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Metal oxide nanowires as chemical sensors10.1016/S1369-7021(10)70126-7 ↗
2. Chemical sensing and catalysis by one-dimensional metal-oxide nanostructures10.1146/annurev.matsci.34.040203.112141 ↗
3. Devices and chemical sensing applications of metal oxide nanowires10.1039/B816543B ↗
4. Gas sensors based on one dimensional nanostructured metal-oxides: a review10.3390/s120607207 ↗
5. Porous metal oxides as gas sensors10.1002/chem.200700927 ↗
6. Fabrication and gas-sensing properties of porous ZnO nanoplates10.1002/adma.200800243 ↗
7. Porous SnO2 nanospheres as sensitive gas sensors for volatile organic compounds detection10.1039/c0nr00728e ↗
8. Flower-like hierarchical structures consisting of porous single-crystalline ZnO nanosheets and their gas sensing properties to volatile organic compounds (VOCs)10.1016/j.jallcom.2014.11.175 ↗
9. Porous and single-crystalline ZnO nanobelts: fabrication with annealing precursor nanobelts, and gas-sensing and optoelectronic performance10.1088/0957-4484/27/35/355702 ↗
10. Highly porous CdO nanowires: preparation based on hydroxy- and carbonate-containing cadmium compound precursor nanowires, gas sensing and optical properties10.1088/0957-4484/19/24/245611 ↗
11. Template synthesis, organic gas-sensing and optical properties of hollow and porous In2O3 nanospheres10.1088/0957-4484/19/34/345704 ↗
12. Fabrication of porous SnO2 nanowires gas sensors with enhanced sensitivity10.1016/j.snb.2017.05.161 ↗
13. Localized liquid-phase synthesis of porous SnO2 nanotubes on MEMS platform for low-power, high performance gas sensors10.1021/acsami.7b04850 ↗
14. High-aspect-ratio single-crystalline porous In2O3 nanobelts with enhanced gas sensing properties10.1039/c1jm11356a ↗
15. Room-temperature high-performance H2S sensor based on porous CuO nanosheets prepared by hydrothermal method10.1021/acsami.6b02893 ↗
16. Cation-exchange synthesis of Cu2Se nanobelts and thermal conversion to porous CuO nanobelts with highly selective sensing toward H2S10.1021/acsanm.7b00106 ↗
17. Facile synthesis of porous alpha-Fe2O3 nanorods and their application in ethanol sensors10.1021/jp806430f ↗
18. Fabrication of porous alpha-Fe2O3 nanoshuttles and their application for toluene sensors10.1039/C4RA03743J ↗
19. A designed ZnO@ZIF-8 core–shell nanorod film as a gas sensor with excellent selectivity for H2 over CO10.1002/chem.201700320 ↗
20. CuO/V2O5 hybrid nanowires for highly sensitive and selective H2S gas sensor10.1039/C7RA06657K ↗
21. Selective improvement of NO2 gas sensing behavior in SnO2 nanowires by ion-beam rrradiation10.1021/acsami.6b01619 ↗
22. Pulse-like highly selective gas sensors based on ZnO nanostructures synthesized by a chemical route: effect of in doping and Pd loading10.1016/j.snb.2012.03.039 ↗
23. Enhanced formaldehyde sensing performance of 3D hierarchical porous structure Pt-functionalized NiO via a facile solution combustion synthesis10.1016/j.snb.2015.05.056 ↗
24. Highly sensitive and selective butanone sensors based on cerium-doped SnO2 thin films10.1016/j.snb.2010.01.014 ↗
25. Highly sensitive formaldehyde gas sensor based on hierarchically porous Ag-loaded ZnO heterojunction nanocomposites10.1016/j.snb.2017.03.077 ↗
26. Au nanoparticle-decorated porous SnO2 hollow spheres: a new model for a chemical sensor10.1039/c0jm00457j ↗
27. Hollow Pt-functionalized SnO2 hemipill network formation using a bacterial skeleton for the noninvasive diagnosis of diabetes10.1021/acssensors.7b00955 ↗
28. Trimethylamine sensors based on Au-modified hierarchical porous single-crystalline ZnO nanosheets10.3390/s17071478 ↗
29. Chlorobenzene sensor based on Pt-decorated porous single-crystalline ZnO nanosheets10.1016/j.sna.2016.11.004 ↗
30. Enhanced toluene sensing performances of Pd-loaded SnO2 cubic nanocages with porous nanoparticle-assembled shells10.1016/j.snb.2016.10.024 ↗
31. Selective epichlorohydrin-sensing performance of Ag nanoparticles decorated porous SnO2 architectures10.1039/C3CE41478G ↗
32. Cation exchange reactions-in ionic nanocrystals10.1126/science.1103755 ↗
33. Cation exchange on the nanoscale: an emerging technique for new material synthesis, device fabrication, and chemical sensing10.1039/C2CS35241A ↗
34. 25th anniversary article: ion exchange in colloidal nanocrystals10.1002/adma.201302400 ↗
35. Forging colloidal nanostructures via cation exchange reactions10.1021/acs.chemrev.5b00739 ↗
36. Alloyed copper chalcogenide nanoplatelets via partial cation exchange reactions10.1021/nn502906z ↗
37. Au2Sx/CdS nanorods by cation exchange: mechanistic insights into the competition between cation-exchange and metal ion reduction10.1002/smll.201400524 ↗
38. A facile route to violet- to orange-emitting CdxZn1−xSe alloy nanocrystals via cation exchange reaction10.1088/0957-4484/18/38/385606 ↗
39. Cation exchange synthesis and unusual resistive switching behaviors of Ag2Se nanobelts10.1002/smll.201501689 ↗
40. Hierarchical morphology-dependent gas-sensing performances of three-dimensional SnO2 nanostructures10.1021/acssensors.6b00597 ↗
41. A positive-microemulsion method for preparing nearly uniform Ag2Se nanoparticles at low temperature10.1002/chem.200600006 ↗
42. Ultrasmall near-infrared Ag2Se quantum dots with tunable fluorescence for in vivo imaging10.1021/ja2089553 ↗
43. One-pot synthesis of Ag/ZnO self-assembled 3D hollow microspheres with enhanced photocatalytic performance10.1021/jp803654k ↗
44. Highly efficient visible light plasmonic photocatalysts Ag@Ag(Cl,Br) and Ag@AgCl–AgI10.1002/cctc.201000380 ↗
45. Synthesis of hierarchical SnO2 nanoflowers with enhanced acetic acid gas sensing properties10.1016/j.apsusc.2015.06.089 ↗
46. Highly sensitive acetic acid gas sensor based on coral-like and Y-doped SnO2 nanoparticles prepared by electrospinning10.1016/j.matlet.2014.09.040 ↗
47. Performance of 3D SnO2 microstructure with porous nanosheets for acetic acid sensing10.1016/j.matlet.2014.12.009 ↗
48. Facile fabrication and enhanced acetic acid sensing properties of honeycomb-like porous ZnO10.1016/j.matlet.2014.09.097 ↗
49. Characterization of electrospun Pr-doped ZnO nanostructure for acetic acid sensor10.1016/j.snb.2013.11.058 ↗
50. Preparation of Co-doped LaFeO3 nanofibers with enhanced acetic acid sensing properties10.1016/j.matlet.2017.04.096 ↗
51. Visible-light-enhanced gas sensing of CdSxSe1−x nanoribbons for acetic acid at room temperature10.1016/j.snb.2015.03.082 ↗