journal article·2020-03-20Open access

Ti–5Al–5Mo–5V–3Cr bone implants with dual-scale topography: a promising alternative to Ti–6Al–4V

Chiara Micheletti, Bryan E J Lee, Joseph Deering, Dakota M Binkley, Simon Coulson, Asad Hussanain, Hatem Zurob, Kathryn Grandfield

Nanotechnology· Volume 31· Issue 23

Abstract

Abstract Modifications to the compositional, topographical and morphological aspects of bone implants can lead to improved osseointegration, thus increasing the success of bone implant procedures. This study investigates the creation of dual-scale topography on Ti–5Al–5Mo–5V–3Cr (Ti5553), an alloy not presently used in the biomedical field, and compares it to Ti–6Al–4V (Ti64), the most used Ti alloy for bone implants. Dual-scale surface topography was obtained by combining selective laser melting (SLM) and electrochemical anodization, which resulted in micro- and nanoscale surface features, respectively. Ti5553 and Ti64 samples were manufactured by SLM and showed comparable surface topography. Subsequent electrochemical anodization succeeded in forming titania nanotubes (TNTs) on both alloys, with larger nanotubes obtained with Ti5553 at all investigated anodization voltages. At an anodization voltage of 40 V, a minimum time of 20 min was necessary to have nanotube formation on the surface of either alloy, while only nanopores were evident for shorter times. Seeded Saos-2 cells showed ideal interactions with surface-modified structures, with filopodia extending to both surface microparticles characteristic of SLM and to the interior of TNTs. Attractiveness of Ti5553 lies in its lower elastic modulus ( E = 72 GPa) compared to Ti64, which should mitigate stress-shielding phenomena in vivo . This, combined with the analogous results obtained in terms of dual-scale surface topography and cell-substrate interaction, could indicate Ti5553 as a promising alternative to the widely-employed Ti64 for bone implant device manufacturing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Biocompatibility of titanium implants: surface science aspects10.1016/0022-3913(83)90359-1 ↗
2. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
3. Additive manufacturing of metallic components by selective electron beam melting—a review10.1080/09506608.2016.1176289 ↗
4. Surface modification of Ti6Al4V open porous structures produced by additive manufacturing10.1002/adem.201100344 ↗
5. Balling phenomena in direct laser sintering of stainless steel powder: metallurgical mechanisms and control methods10.1016/j.matdes.2009.01.013 ↗
6. Engineering biocompatible implant surfaces: I. Materials and surfaces10.1016/j.pmatsci.2012.09.001 ↗
7. Topographic scale-range synergy at the functional bone/implant interface10.1016/j.biomaterials.2013.09.072 ↗
8. Rapid prototyping: porous titanium alloy scaffolds produced by selective laser melting for bone tissue engineering10.1089/ten.tec.2008.0288 ↗
9. Osseointegration of three-dimensional designed titanium implants manufactured by selective laser melting10.1088/1758-5090/8/4/045014 ↗
10. Implant osseointegration and the role of microroughness and nanostructures: lessons for spine implants10.1016/j.actbio.2014.03.037 ↗
11. Nanosurfaces modulate the mechanism of peri-implant endosseous healing by regulating neovascular morphogenesis10.1038/s42003-018-0074-y ↗
12. Understanding and controlling the bone–implant interface10.1016/S0142-9612(99)00160-X ↗
13. Effects of artificial micro- and nano-structured surfaces on cell behaviour10.1016/j.aanat.2008.05.006 ↗
14. Classification of osseointegrated implant surfaces: materials, chemistry and topography10.1016/j.tibtech.2009.12.003 ↗
15. The bone-implant interface—nanoscale analysis of clinically retrieved dental implants10.1016/j.nano.2014.05.015 ↗
16. Crystal structure and nanotopographical features on the surface of heat-treated and anodized porous titanium biomaterials produced using selective laser melting10.1016/j.apsusc.2013.11.069 ↗
17. Anodization parameters influencing the morphology and electrical properties of TiO2 nanotubes for living cell interfacing and investigations10.1016/j.msec.2015.10.042 ↗
18. Anodized 3D–printed titanium implants with dual micro‐ and nano‐scale topography promote interaction with human osteoblasts and osteocyte‐like cells10.1002/term.2239 ↗
19. Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V10.1016/j.msea.2014.07.086 ↗
21. Titanium-based biomaterials for preventing stress shielding between implant devices and bone10.1155/2011/836587 ↗
22. The relationship between stress shielding and bone resorption around total hip stems and the effects of flexible materials10.1097/00003086-199201000-00014 ↗
23. Titanium alloys in total joint replacement—a materials science perspective10.1016/S0142-9612(97)00146-4 ↗
24. New developments of Ti-based alloys for biomedical applications10.3390/ma7031709 ↗
25. Processing of Ti-5553 with improved mechanical properties via an in situ heat treatment combining selective laser melting and substrate plate heating10.1016/j.matdes.2017.05.010 ↗
26. Microstructure and mechanical properties of the near-beta titanium alloy Ti-5553 processed by selective laser melting10.1016/j.matdes.2016.04.103 ↗
27. Processing of a metastable titanium alloy (Ti-5553) by selective laser melting10.1016/j.asej.2016.11.004 ↗
28. Localized tensile strain distribution and metallurgy of electron beam welded Ti–5Al–5V–5Mo–3Cr titanium alloys10.1016/j.jmatprotec.2012.06.023 ↗
29. Characterization and evaluation of femtosecond laser-induced sub-micron periodic structures generated on titanium to improve osseointegration of implants10.1016/j.apsusc.2018.02.119 ↗
30. Engineered titanium implants for localized drug delivery: recent advances and perspectives of titania nanotubes arrays10.1080/17425247.2018.1517743 ↗
31. TiO2 nanotubes: synthesis and applications10.1002/anie.201001374 ↗
32. Efficient suppression of nanograss during porous anodic TiO2 nanotubes growth10.1016/j.apsusc.2014.07.046 ↗
33. A review of the application of anodization for the fabrication of nanotubes on metal implant surfaces10.1016/j.actbio.2012.04.005 ↗
34. Nanosize and vitality: TiO2 nanotube diameter directs cell fate10.1021/nl070678d ↗
35. Fabrication of drug eluting implants: study of drug release mechanism from titanium dioxide nanotubes10.1088/0022-3727/48/27/275401 ↗
36. Microstructure and mechanical behavior of porous Ti–6Al–4V parts obtained by selective laser melting10.1016/j.jmbbm.2013.05.011 ↗
37. The effect of 3D-printed Ti6Al4V scaffolds with various macropore structures on osteointegration and osteogenesis: a biomechanical evaluation10.1016/j.jmbbm.2018.08.049 ↗
38. Optimizing anodization conditions for the growth of titania nanotubes on curved surfaces10.1021/acs.jpcc.5b03383 ↗
39. Significantly accelerated osteoblast cell growth on aligned TiO2 nanotubes10.1002/jbm.a.30722 ↗
40. Tailoring the wettability of TiO2 nanotube layers10.1016/j.elecom.2005.07.014 ↗
41. A review on the wettability of dental implant surfaces I: theoretical and experimental aspects10.1016/j.actbio.2014.02.040 ↗
42. Wettability changes of TiO2 nanotube surfaces10.1088/0957-4484/22/31/315704 ↗
43. Photogeneration of highly amphiphilic TiO2 surfaces10.1002/(SICI)1521-4095(199801)10:2<135::AID-ADMA135>3.0.CO;2-M ↗
44. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
45. Thermomechanical processing of Ti–5Al–5Mo–5V–3Cr10.1016/j.msea.2008.01.055 ↗