Self-powered TENG probe for scanning surface charge distribution
Source abstract
Abstract
Abstract Triboelectric nanogenerators are remarkable devices that show great potential in harvesting energy from mechanical work and are generally used for sensing purposes. Here we report a novel method for the fabrication of ZnO microspheres and the formation of TENG based on ZnO/PDMS composite. The zinc oxide microspheres with needle decorated structure via thermal oxidation of metallic zinc was grown at 500 °C. The TENG was then fabricated using ZnO/PDMS composite with Au sputtered electrode. While PDMS is a good triboelectric material, its output power density is low. Embedding ZnO micro/nanostructures in PDMS increases the output power of PDMS-based TENG manifolds. ZnO with a high dielectric constant exhibits semiconductor properties as well as piezoelectric properties. This combines with the triboelectric properties of PDMS and gives a significant boost to the TENG performance. This composite structure is used for the fabrication of high output power density TENG using contact separation mode, where the power density of 27Wm−2 was achieved. Consequently, a novel device application to detect surface charge density through the fabricated TENG is reported and the subsequent reconstruction of surface charge topology based on the detected surface charge density on large surfaces is presented. This technique may be used for the study of surface charge morphology, electrostatics, triboelectric constants, and various other material properties for characterization and application purposes.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Triboelectric nanogenerators for blue energy harvesting10.1021/acsnano.6b04213 ↗
2. Dependence of triboelectric charging behavior on material microstructure10.1103/PhysRevMaterials.1.035605 ↗
3. Laser-induced graphene triboelectric nanogenerators10.1021/acsnano.9b02596 ↗
4. Maximum surface charge density for triboelectric nanogenerators achieved by ionized-air injection: methodology and theoretical understanding10.1002/adma.201402491 ↗
5. Nanogenerators as a sustainable power source: state of art, applications, and challenges10.3390/nano9050773 ↗
6. Improving the surface charge density of a contact-separation-based triboelectric nanogenerator by modifying the surface morphology10.1016/j.mee.2016.02.066 ↗
7. PDMS-based triboelectric and transparent nanogenerators with ZnO nanorod arrays10.1021/am5018072 ↗
8. Trap distribution and conductivity synergic optimization of high-performance triboelectric nanogenerators for self-powered devices10.1021/acsami.0c18243 ↗
9. In situ quantitative study of nanoscale triboelectrification and patterning10.1021/nl401006x ↗
10. Machine-learning-assisted recognition on bioinspired soft sensor arrays10.1021/acsnano.2c01548 ↗
11. Triboelectric bending sensor based smart glove towards intuitive multi-dimensional human-machine interfaces10.1016/j.nanoen.2021.106330 ↗
12. Boosting the power and lowering the impedance of triboelectric nanogenerators through manipulating the permittivity for wearable energy harvesting10.1021/acsnano.1c00914 ↗
13. Sliding-triboelectric nanogenerators based on in-plane charge-separation mechanism10.1021/nl400738p ↗
14. A flexible single-electrode-based triboelectric nanogenerator based on double-sided nanostructures10.1063/1.5114884 ↗
15. Quantifying contact status and the air-breakdown model of charge-excitation triboelectric nanogenerators to maximize charge density
16. The development of a dynamic model to investigate the dielectric layer thickness effect for the device performance in triboelectric nanogenerators10.1109/TED.2019.2933697 ↗
17. Boosting power-generating performance of triboelectric nanogenerators via artificial control of ferroelectric polarization and dielectric properties10.1002/aenm.201600988 ↗
18. ZnO/PDMS nanocomposite generator: interphase influence in the nanocomposite electro-mechanical properties and output voltage10.1016/j.egyr.2021.01.086 ↗
19. Carbon electrodes enable flat surface PDMS and PA6 triboelectric nanogenerators to achieve significantly enhanced triboelectric performance10.1016/j.nanoen.2018.11.012 ↗
20. Test bed for rotation-based triboelectric nanogenerators10.1063/1.5141487 ↗
21. Material aspects of triboelectric energy generation and sensors10.1038/s41427-019-0176-0 ↗
22. Study of electrostatic properties of dielectric surfaces and powders using scanning probe microscopy
23. Quantitative measurement of the surface charge density10.1063/1.3269606 ↗
24. Measuring surface charge density and particle height using surface plasmon resonance technique10.1021/ac901816z ↗
25. An alternative method to measure charge distributions: The scanning Kelvin probe
26. A Kelvin probe force microscopy study of the photogeneration of surface charges in all-thiophene photovoltaic blends10.1002/adfm.200600122 ↗
27. Hydroxyapatite surface charge investigated by scanning probe microscopy
28. Scanning triboelectric nanogenerator as a nanoscale probe for measuring local surface charge density on a dielectric film10.1063/5.0051522 ↗
29. Measurement of hardness, surface potential, and charge distribution with dynamic contact mode electrostatic force microscope10.1063/1.1149660 ↗
30. Growth of ZnO Nanoneedles by Thermal Oxidation of Metallic Zinc Microparticles in Air10.15224/978-1-63248-084-2-44 ↗
31. Multifunctional mechanical metamaterials with embedded triboelectric nanogenerators10.1002/adfm.202001720 ↗
32. Surface texturing and dielectric property tuning toward boosting of triboelectric nanogenerator performance10.1039/C7TA07696G ↗
33. Enhanced performance of ZnO microballoon arrays for a triboelectric nanogenerator10.1088/1361-6528/aa5f34 ↗
34. A high-performance single-electrode triboelectric nanogenerator based on polydimethylsiloxane surface modified using zinc oxide nanotubes: Fabrication and simulation
35. The morphology effect of embedded ZnO particles-based composite on flexible hybrid piezoelectric triboelectric nanogenerators for harvesting biomechanical energy10.1007/s10971-022-06019-0 ↗
36. Dynamical charge transfer model for high surface charge density triboelectric nanogenerators10.1016/j.nanoen.2020.104513 ↗
37. Fundamental theories and basic principles of triboelectric effect: a review10.1007/s40544-018-0217-7 ↗
38. Simulation and modelling of triboelectric nanogenerator for self-powered electronic devices10.1088/1757-899X/1225/1/012012 ↗
39. Photoinduced discharge characteristics of Kapton-H polyimide film photoreceptors10.1016/0304-3886(86)90025-2 ↗
40. Remarkable increase in triboelectrification by enhancing the conformable contact and adhesion energy with a film-covered pillar structure10.1016/j.nanoen.2017.02.032 ↗
41. Achieving ultrahigh triboelectric charge density for efficient energy harvesting10.1038/s41467-017-00131-4 ↗
42. Integrated charge excitation triboelectric nanogenerator10.1038/s41467-019-09464-8 ↗
43. Improved output performance of triboelectric nanogenerator by fast accumulation process of surface charges10.1002/aenm.202100050 ↗
44. Pumping up the charge density of a triboelectric nanogenerator by charge-shuttling10.1038/s41467-020-17891-1 ↗
45. A self-improving triboelectric nanogenerator with improved charge density and increased charge accumulation speed10.1038/s41467-018-06045-z ↗
46. Effect of humidity and pressure on the triboelectric nanogenerator10.1016/j.nanoen.2013.07.012 ↗
47. Achieving ultrarobust and humidity-resistant triboelectric nanogenerator by dual-capacitor enhancement system10.1002/aenm.202101958 ↗