Nanohybrids of oxides nanoparticles-chitosan and their antimicrobial properties
Source abstract
Abstract
Abstract Growing international problem with pathogens acquiring resistance to antibiotics is the reason for the search for bactericidal substances against which microorganisms cannot become resistant. The aim of this study was to synthesize inorganic–organic nanohybrids and obtain materials with antimicrobial effects. Chitosan (CS) was deposited on nanocomposite carriers such as calcium oxide with titanium dioxide (CaO-TiO 2 ), magnesium oxide with titanium dioxide (MgO-TiO 2 ) and copper(II) oxide with titanium dioxide (CuO-TiO 2 ). The efficiency of the process was examined at varying concentrations of chitosan and temperature. The parameters for nanohybrids synthesis were selected based on the highest amount of nano-chitosan deposited on the nanohybrids—for each carrier, the process conditions were as follows: chitosan solution at 5 g l −1 and 20 °C. The materials were obtained using these parameters and were used for microbiological tests against E. coli ATCC 25922, S. aureus ATCC 25923 and C. albicans ATCC 10231. The growth inhibitory activity of the obtained materials was qualitatively defined. These results suggest that the synthesized nanohybrids and nanocomposites exhibit biostatic action. The material with the broadest effect was the CuO-TiO 2 -CS hybrid, which had biostatic properties against all tested strains at a minimal concentration of 1250 μ g ml −1 . Further research is required to find eco-friendly, non-toxic, and more effective antimicrobials with a broad action to prevent the acquisition of resistance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nanoparticles: synthesis and applications · Copper-based nanomaterials and applications · Nanocomposite Films for Food Packaging
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (87)
Show source-provided references
1. Access to effective antimicrobials: a worldwide challenge10.1016/S0140-6736(15)00474-2 ↗
2. Worldwide emergence of resistance to antifungal drugs challenges human health and food security10.1126/science.aap7999 ↗
3. Antifungal resistance: an emerging reality and a global challenge10.1093/infdis/jix179 ↗
4. Inorganic and metal nanoparticles and their antimicrobial activity in food packaging applications10.1080/1040841X.2017.1332001 ↗
5. Inorganic nanoparticles and composite films for antimicrobial therapies10.3390/ijms22094595 ↗
6. Antimicrobial nanoparticles: applications and mechanisms of action10.4038/sljid.v8i1.8167 ↗
7. Zinc oxide nanoparticles: synthesis, antimicrobial activity and food packaging applications10.1007/s11947-012-0797-6 ↗
8. Antimicrobial activity of metal and metal‐oxide based nanoparticles10.1002/adtp.201700033 ↗
9. Metal oxide nanoparticles as bactericidal agents10.1021/la0202374 ↗
10. A topical hydrogel with deferiprone and gallium-protoporphyrin targets bacterial iron metabolism and has antibiofilm activity10.1128/AAC.00481-17 ↗
11. Size- and shape-dependent antibacterial studies of silver nanoparticles synthesized by wet chemical routes10.3390/nano6040074 ↗
12. The bactericidal effect of silver nanoparticles10.1088/0957-4484/16/10/059 ↗
13. Hybrid nanomaterials as chemical sensors10.1016/B978-0-12-821354-4.00009-1 ↗
14. Hybrid Nanomaterials for Water Purification10.1016/B978-0-12-821354-4.00007-8 ↗
15. Multifunctional hybrid nanomaterials for sustainable agri-food and ecosystems: a note from the editor10.1016/B978-0-12-821354-4.00001-7 ↗
16. Hybrid nanomaterials for detection, detoxification, and management mycotoxins10.1016/B978-0-12-821354-4.00012-1 ↗
17. Vilela · 201410.1007/978-3-030-00347-0 ↗
18. Antimicrobial activity of zinc and titanium dioxide nanoparticles against biofilm-producing methicillin-resistant staphylococcus aureus10.1007/s13204-014-0301-x ↗
19. Antifungal activity of TiO2 nanoparticles and EDTA on Candida albicans biofilms
20. Antimicrobial activities and mechanisms of magnesium oxide nanoparticles (nMgO) against pathogenic bacteria, yeasts, and biofilms10.1038/s41598-018-34567-5 ↗
21. Antimicrobial effects of calcium oxide nanoparticles and some spices in minced meat10.20431/2455-2518.0302004 ↗
22. Green synthesis, characterisations and antimicrobial activities of CaO nanoparticles10.13005/ojc/350333 ↗
23. Antimicrobial activity of CaO nanoparticles10.1166/jbn.2013.1681 ↗
24. Antimicrobial effect of copper oxide nanoparticles on some oral bacteria and candida species
25. Synthesis, characterization, and antimicrobial activity of copper oxide nanoparticles10.1155/2014/637858 ↗
26. Antimicrobial activity of the metals and metal oxide nanoparticles10.1016/j.msec.2014.08.031 ↗
27. Antioxidant and antimicrobial applications of biopolymers: a review10.1016/j.foodres.2020.109327 ↗
28. Biopolymer Composite Materials with Antimicrobial Effects Applied to the Food Industry10.1007/978-3-319-66417-0_3 ↗
29. A novel nanohybrid antimicrobial based on chitosan nanoparticles and antimicrobial peptide microcin J25 with low toxicity10.1016/j.carbpol.2020.117309 ↗
30. A novel polymeric nanohybrid antimicrobial engineered by antimicrobial peptide MccJ25 and chitosan nanoparticles exerts strong antibacterial and anti-inflammatory activities10.3389/fimmu.2021.811381 ↗
31. Bio-based antimicrobial packaging from sugarcane bagasse nanocellulose/nisin hybrid films10.1016/j.ijbiomac.2020.06.081 ↗
32. Graphene oxide–silver nanoparticle nanohybrids: synthesis, characterization, and antimicrobial properties10.3390/nano10020376 ↗
33. Fabrication of silver-decorated graphene oxide nanohybrids via pulsed laser ablation with excellent antimicrobial and optical limiting performance10.3390/nano11040880 ↗
34. A facile strategy for the construction of TiO2/Ag nanohybrid-based polyethylene nanocomposite for antimicrobial applications10.1016/j.nanoso.2021.100671 ↗
35. Synthesis of Fe3O4/Ag nanohybrid ferrofluids and their applications as antimicrobial and antifibrotic agents10.1016/j.heliyon.2020.e05813 ↗
36. Antimicrobial synergy of silver-platinum nanohybrids with antibiotics10.3389/fmicb.2020.610968 ↗
37. Improved antimicrobial efficacy and photocatalytic performance of gold decorated titanium dioxide nanohybrid10.1016/j.ijleo.2020.165515 ↗
38. Synthesis and characterization of Ag nanoparticle inter Nickel/Aluminum-layer double hydroxide nano hybrids compounds10.1088/1757-899X/871/1/012021 ↗
39. Fabrication of novel nanohybrids by impregnation of CuO nanoparticles into bacterial cellulose and chitosan nanofibers: characterization, antimicrobial and release properties10.1016/j.carbpol.2018.01.067 ↗
40. A novel green approach to synthesize curcuminoid-layered double hydroxide nanohybrids: adroit biomaterials for future antimicrobial applications10.1021/acsomega.1c00151 ↗
41. Electrospun AgNPs-polylactate nanofibers and their antimicrobial applications10.1016/j.reactfunctpolym.2021.104999 ↗
42. Synthesis and characterization of selenium nanoparticles-lysozyme nanohybrid system with synergistic antibacterial properties10.1038/s41598-019-57333-7 ↗
43. Facile mechanochemical approach to synthesizing edible food preservation coatings based on alginate/ascorbic acid-layered double hydroxide bio-nanohybrids10.1021/acs.jafc.0c01879 ↗
44. Hybrid humic acid/titanium dioxide nanomaterials as highly effective antimicrobial agents against gram(−) pathogens and antibiotic contaminants in wastewater10.1016/j.envres.2020.110562 ↗
45. Importance of bacterial growth phase in determining minimal bactericidal concentrations of penicillin and methicillin10.1128/AAC.19.6.1075 ↗
46. Agar and broth dilution methods to determine the minimal inhibitory concentration (MIC) of antimicrobial substances10.1038/nprot.2007.521 ↗
47. Bactericidal capacity of a heterogeneous TiO2/ZnO nanocomposite against multidrug-resistant and non-multidrug-resistant bacterial strains associated with nosocomial infections10.1021/acsomega.0c00213 ↗
48. Compositions and antimicrobial properties of binary ZnO–CuO nanocomposites encapsulated calcium and carbon from calotropis gigantea targeted for skin pathogens10.1038/s41598-020-79547-w ↗
49. Investigation of the antimicrobial activity and hematological pattern of nano-chitosan and its nano-copper composite10.1038/s41598-021-88907-z ↗
50. Characterisation of copper oxide nanoparticles for antimicrobial applications10.1016/j.ijantimicag.2008.12.004 ↗
51. Insights into ZnO-based doped porous nanocrystal frameworks10.1039/D1RA09152B ↗
52. Enhancement of oral bioavailability of atorvastatin calcium by self-emulsifying drug delivery systems (SEDDS10.3109/10837450903499333 ↗
53. Infrared spectroscopic analysis of the inorganic deposits from water in domestic and technical heat exchangers10.3390/en11040798 ↗
54. Linstrom · 202110.18434/T4D303 ↗
55. Immobilization of enzymes on an organic-inorganic hybrid network consisting of dawson-type polyoxotungstate and a zinc(ii)-biimidazole complex moiety10.1039/C8NJ03776K ↗
56. Preparation and characterization of CaO nanoparticles from Ca(OH)2 by direct thermal decomposition method10.1016/j.jiec.2013.04.018 ↗
57. Synthesis of hierarchical structured MgO by sol-gel method
58. Comparative study on arsenate removal mechanism of MgO and MgO/TiO2 composites: FTIR and XPS analysis10.1039/C5NJ02358K ↗
59. Quick high-temperature hydrothermal synthesis of mesoporous materials with 3D cubic structure for the adsorption of lysozyme10.1088/1468-6996/16/2/024806 ↗
60. Structural and optical absorption analysis of CuO nanoparticles
61. Microstructural, optical and magnetic properties study of nanocrystalline MgO10.1088/2053-1591/1/2/025026 ↗
62. Effect of chitosan and chitosan-nanoparticles on post harvest quality of banana fruits10.5010/JPB.2018.45.1.036 ↗
63. Synthesis and characterizations of o-nitrochitosan based biopolymer electrolyte for electrochemical devices10.1371/journal.pone.0212066 ↗
64. Application of pH-responsive fucoidan/chitosan nanoparticles to improve oral quercetin delivery10.3390/molecules24020346 ↗
65. Functionalized-chitosan/quantum dot nano-hybrids for nanomedicine applications: towards biolabeling and biosorbing phosphate metabolites10.1039/c3tb00498h ↗
66. Chitosan-coated magnetic nanoparticles with low chitosan content prepared in one-step10.1155/2012/327562 ↗
67. Size-dependent antimicrobial properties of CuO nanoparticles against Gram-positive and -negative bacterial strains10.2147/IJN.S29020 ↗
68. Infrared spectra and characteristic frequencies of inorganic ions10.1021/ac60068a007 ↗
69. Synthesis and structural profile analysis of the MgO nanoparticles produced through the sol-gel method followed by annealing process10.13005/ojc/340252 ↗
70. Synthesis of nano-calcium oxide from waste eggshell by sol-gel method10.3390/su11113196 ↗
71. FTIR studies of chitosan acetate based polymer electrolytes10.1016/S0013-4686(02)00812-5 ↗
72. Facile and efficient route for preparation of polypyrrole-ZnO nanocomposites: microstructural, optical, and charge transport properties10.1002/app.36475 ↗
73. The influence of titanium dioxide nanofiller ratio on morphology and surface properties of TiO2/chitosan nanocomposite10.1016/j.rinp.2019.102296 ↗
74. Synthesis CuO-ZnO nanocomposite and its application as an antibacterial agent10.1088/1757-899X/172/1/012036 ↗
75. Bifunctional CuO/TiO2 nanocomposite as nanofiller for improved corrosion resistance and antibacterial protection10.1016/j.porgcoat.2017.09.013 ↗
76. Ultrasound/visible light-mediated synthesis of N-heterocycles using g-C3N4/Cu3TiO4 as sonophotocatalyst10.1007/s11164-021-04461-3 ↗
77. Facile fabrication of CuO nanoparticles via microwave-assisted method: photocatalytic, antimicrobial and anticancer enhancing performance10.1080/03067319.2020.1733543 ↗
78. Mechanistic aspects of formation of MgO nanoparticles under microwave irradiation and its catalytic application10.1016/j.apt.2017.02.004 ↗
79. Synthesis of MgTiO3 and Mg4Nb2O9 using stoichiometrically excess MgO10.1016/S0167-577X(01)00525-0 ↗
80. Microwave-assisted synthesis and characterization of CaO nanoparticles10.1142/S0219581X11008150 ↗
81. Synthesis of calcium titanate from [Ca(H2O)3]2[Ti2(O2)2O(NC6H6O6)2]2H2O as a cheap single-source precursor10.1016/j.solidstatesciences.2009.11.010 ↗
82. Chitosan capping of CuO nanoparticles: facile chemical preparation, biological analysis, and applications in dentistry10.1016/j.ijbiomac.2020.11.099 ↗
83. Investigation of the antimicrobial activity and hematological pattern of nano-chitosan and its nano-copper composite10.1038/s41598-021-88907-z ↗
84. Biocidal chitosan-magnesium oxide nanoparticles via a green precipitation process10.1016/j.jhazmat.2020.124884 ↗
85. Phytonanosynthesis of MgO nanoparticles: green synthesis, characterization and antimicrobial evaluation10.1007/s13369-021-06107-3 ↗
86. Evaluation of antibacterial activity of plant mediated CaO nanoparticles using Cissus quadrangularis extract10.1016/j.jphotobiol.2015.12.013 ↗
87. Nanoparticle fabrication of calcium oxide (CaO) mediated by the extract of red dragon fruit peels (Hylocereus Polyrhizus) and its application as inorganic-anti-microorganism materials10.1088/1757-899X/509/1/012090 ↗