Laser ultrasonics inspection for defect evaluation on train wheel
Source abstract
Abstract
Abstract Passengers’ safety and in-service life of wheelset axles play an important role in railway vehicles. For this reason, periodic inspections are necessary. Among non-destructive techniques, ultrasonic ones are widely applied in this field. The main disadvantage of conventional ultrasonic techniques is that the overall inspection of wheels requires the train to be put out-of-service and disassembly each part, which is time-consuming and expensive. In this paper, a non-conventional non-contact laser ultrasonic inspection for train wheels is proposed. The proposed method uses a laser interferometer to receive the ultrasonic wave without contact. The receiving system allows choosing the distance between the surface to be inspected and the interferometer, overcoming any encumbrance issue. The experimental investigation is carried out on standard-reproduced defects in order to evaluate the reliability and the accuracy of the technique and to verify its applicability for railway components, as wheels, which have a complex geometry. The experimental setup consists of a pulsed laser for the ultrasonic wave generation. The receiving unit combines a continuous-wave laser and an interferometer in order to acquire the surface out-of-plane displacements. Surface and internal standard defects are detected by collecting all the A-scans in a B-scan map. The results are promising for the application of the laser technique to detect both surface and internal defects on in-service components.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Non-Destructive Testing Techniques · Welding Techniques and Residual Stresses · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. The tool for assessing the damage tolerance of railway wheel under service conditions10.1016/j.tafmec.2011.12.002 ↗
2. Wheel/rail rolling contact fatigue - probe, predict, prevent10.1016/j.wear.2013.12.004 ↗
3. Fatigue crack growth in wheelset axles under bending and torsional loading10.1016/j.ijfatigue.2018.07.038 ↗
4. Nondestructive testing of train wheels using differential-type integrated Hall sensor matrixes embedded in train rails10.1016/j.ndteint.2013.01.003 ↗
5. Analysis of temperature and fracture surface of AISI4140 steel in very high cycle fatigue regime10.1016/j.tafmec.2015.07.007 ↗
6. Reconstruction of the rolling contact fatigue cracks in rails using X-ray computed tomography10.1016/j.ndteint.2017.09.004 ↗
7. Real-time non-invasive measurement and monitoring of wheel–rail contact using ultrasonic reflectometry
8. Experimental investigation by laser ultrasonics for high speed train axle diagnostics10.1016/j.ultras.2014.08.010 ↗
9. Numerical study for a new methodology of flaws detection in train axles10.1016/j.ultras.2013.10.008 ↗
10. Potential improvements of the presently applied in-service inspection of wheelset axles10.1016/j.ijfatigue.2015.08.014 ↗
11. Wheel flat detection in high-speed railway systems using fiber bragg gratings10.1109/JSEN.2013.2274008 ↗
12. Structural health monitoring of railroad wheels using wheel impact load detectors10.1007/s11668-007-9043-3 ↗
13. Infrared diagnostics of cracks in railway carriage wheels10.1134/S1061830908100021 ↗
14. Condition monitoring approaches for the detection of railway wheel defects10.1177/0954409716656218 ↗
15. Laser-generated acoustic signal interaction with surface flaws on rail wheels10.1080/09349840500306006 ↗
16. NDT techniques for railroad wheel and gauge corner inspection10.1016/j.ndteint.2003.06.001 ↗
17. Train wheel diagnostics by laser ultrasonics10.1016/j.measurement.2015.11.014 ↗
18. Fracture mechanics in railway applications - an overview10.1016/j.engfracmech.2003.11.010 ↗
19. In-motion ultrasonic testing of the tread of high-speed railway wheels using the inspection system AUROPA III10.1784/insi.2009.51.7.370 ↗
20. Peng · 2012 · 16
21. Dynamic railroad inspection using the laser-air hybrid ultrasonic technique10.1784/insi.2006.48.6.336 ↗
22. Detection of disbonds in multi-layer structures by laser-based ultrasonic technique10.1080/00218460802443295 ↗
23. Defect detection in thick weld structure using welding in-process laser ultrasonic testing system10.2320/matertrans.I-M2014809 ↗
24. Internal defect detection using laser-generated longitudinal waves in ablation regime10.1007/s12206-018-0817-1 ↗
25. Simulation of laser ultrasonics for detection of surface-connected rail defects10.1007/s10921-017-0451-3 ↗
26. Fast classification for rail defect depths using a hybrid intelligent method10.1016/j.ijleo.2018.11.053 ↗
27. Rail track field testing using laser/air hybrid ultrasonic technique
28. Laser-air hybrid ultrasonic technique for dynamic railroad inspection applications10.1784/insi.47.6.336.66454 ↗
29. Scruby · 1990
30. A modified Hough transform for removal of direct and reflected surface waves from B-scans10.1016/j.ndteint.2010.11.004 ↗
31. Parabola detection using matched filtering for ultrasound B-scans10.1016/j.ultras.2011.07.006 ↗
32. 2D size, position and shape definition of defects by B-scan image analysis