journal article·2017-04

Lift-off effect reduction based on the dynamic trajectories of the received-signal fast Fourier transform in pulsed eddy current testing

Yuewen Fu, Meiling Lei, Zhaoxi Li, Zengtao Gu, Hao Yang, Aisong Cao, Jie Sun

Publisher page

Abstract

Abstract Reduction of interferences such as the lift-off effect in pulsed eddy current (PEC) testing has been difficult. A new approach based on the dynamic trajectories of the fast Fourier transform (FFT) of the received signals is presented in this paper for reducing the lift-off effect in PEC. The PEC probe scans the surface of the test sample and a set of received signals for a corresponding set of scanning points is stored. FFT is performed on all these stored signals, and the real and imaginary parts for a particular FFT harmonic of all the stored scanning points are plotted in a complex plane to form a dynamic trajectory. The defect trajectory can be recognized from the lift-off trajectory by observing the angle between them, as in conventional eddy current testing. By moving the defect trajectory in the complex plane for each harmonic to a zero-lift-off point and performing an inverse fast Fourier transform (IFFT) based on the new trajectories for all the harmonics, the traditional PEC time domain differential signals for a defect can be reconstructed. Then, the acquired results are amplified with a coefficient related to the inspection settings and final differential signals closely approximating the original defect differential signals without lift-off are obtained. Experimental results demonstrate that the proposed method is highly effective, particularly for the simultaneous inspection of internal and surface defects, although the location of the defect in the depth direction is unknown before inspection.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Non-Destructive Testing Techniques · Welding Techniques and Residual Stresses · Geophysical Methods and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Measurement and calculation of transient Eddy-currents in layered structures
2. Characterization of hidden corrosion in multilayer aircraft structures using transient eddy-current NDE
3. Transient eddy current NDE for ageing aircraft - capabilities and limitations
4. Detection of cracks beneath rivets via pulsed eddy current technique
5. Defect characterization in multi-layered conductive components with pulsed eddy current
6. Pulsed eddy current system for dynamic inspection of defects10.1784/insi.46.5.256.55559 ↗
7. Pulsed eddy current: finding corrosion independently of transducer lift-off
8. Pulsed eddy current technology: characterizing material loss with gap and lift off variations10.1080/09349840109409692 ↗
9. Interpretation of pulsed eddy current signals for locating and quantifying metal loss in thin skin lap splices
10. Lift-Off point of Intercept(LOI) Behavior
11. Transient and harmonic eddy currents: lift-off point of intersection10.1016/j.ndteint.2005.06.003 ↗
12. study of lift-off invariance for pulsed eddy-current signals10.1109/TMAG.2008.2006246 ↗
13. Reduction of lift-off effects for pulsed eddy current NDT10.1016/j.ndteint.2004.09.007 ↗
14. Reduction of lift-off effect for pulsed eddy current NDT based on sensor design and frequency spectrum analysis10.1080/10589750902994415 ↗
15. Time-frequency analysis of pulsed eddy current signals10.1023/A:1012244208475 ↗
16. Reduction of lift-off effects in pulsed eddy current for defect classification10.1109/TMAG.2011.2160726 ↗
17. Research on spectral response of pulsed eddy current and NDE applications10.1016/j.sna.2012.10.011 ↗
18. An approach to reduce lift-off noise in pulsed eddy current nondestructive technology10.1016/j.ndteint.2013.12.012 ↗