Application of laser-generated guided wave for evaluation of corrosion in carbon steel pipe
Source abstract
Abstract
Local wall thinning of pipes, resulting from corrosion, is the major cause of accidents in nuclear power plants. In order to assure the integrity of pipes, a variety of NDE techniques have been proposed. It is well recognized that the utilization of guided waves to detect flaws in pipes has been a very effective tool for long-range inspection in NDE. Since most conventional research on guided waves has focused on long-range inspection, it is difficult to evaluate a defect in a local area. An objective of this study is to develop a non-contact inspection technique for the quantitative evaluation of defects on a local area in a cylindrical tube. Therefore, the purpose of this study is to introduce an advanced inspection system and a new signal processing method for the evaluation of defects such as corrosion in a pipe. In this study, an advanced non-contact method for pipe inspection is proposed, which generates the ultrasonic guided wave by laser and receives it by a dual air-coupled transducer. Information on each directional defect location and length is obtained by using a line scan along a circumferential and longitudinal direction. Received signals are analyzed by using the peak-to-peak amplitude of waveform and the maximum center frequency magnitude of the frequency spectrum. The optimal mode selection of guided waves based on a dispersion curve is also discussed. The experimental results using the proposed method show that the location and the size of the defect could be evaluated successfully in the 2-dimensional scanning images.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques · Thermography and Photoacoustic Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (8)
Show source-provided references
1. Hidden corrosion detection in aircraft aluminum structures using laser ultrasonics and wavelet transform signal analysis10.1016/S0041-624X(02)00455-9 ↗
2. Estimation of wall thinning in mild steel using laser ultrasound lamb waves and a non-steady-state photo-emf detector10.1016/S0041-624X(02)00208-1 ↗
3. Rose · 1999
4. Non-contact ultrasonic techniques10.1016/j.ultras.2004.01.101 ↗
5. Scruby · 1990
6. Air-coupled ultrasonic investigation of multi-layered composite materials10.1016/j.ultras.2006.05.112 ↗
7. Imaging of defects in thin plate by scanning of laser-generated focused-lamb waves10.4028/www.scientific.net/KEM.270-273.1785 ↗
8. Non-contact guided wave technique with enhanced mode-selectivity