Analysis of the universality of the residual stress evaluation method based on residual magnetic field measurements
Source abstract
Abstract
Abstract The paper presents an analysis of the universality of the algorithm for the evaluation of residual stress of the first order using the gradients of the residual magnetic field (RMF) components. The impact of the component geometry on quantitative relationships between residual stress and the RMF component gradients are studied. Two kinds of flat samples with a different geometries (type A and B) are analysed. For different degrees of plastic strain, on the surface of the samples, the distributions of the RMF components are measured. The finite element method is used to model residual stress in the samples. The quantitative relationships between the RMF component gradients and equivalent residual (von Mises) stress are developed based on the measurements of samples with type A notch geometry. These relationships are verified by using them to evaluate residual stress in type B samples with a different geometry. It is found that the quantitative evaluation of residual stress in components which is based on the RMF gradients requires at every instance the development of a transition function for the specific geometry, material and orientation of the component in the magnetic field of the Earth.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Non-Destructive Testing Techniques · Microstructure and Mechanical Properties of Steels · Electromagnetic Effects on Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Evaluation of residual stress in ferromagnetic steels based on residual magnetic field measurements10.1016/j.ndteint.2011.09.007 ↗
2. McEvily · 2002
3. Micro-magnetic evaluation of micro residual stresses of the IInd and IIIrd order10.1016/j.ndteint.2008.11.007 ↗
4. Technical risk involved in long-term operation of steam turbines10.1016/j.ress.2006.07.007 ↗
5. Numerical simulation of turbine valve creep
6. Theory of the magnetomechanical effect10.1088/0022-3727/28/8/001 ↗
7. Simon Barrans residual magnetic field sensing for stress measurement10.1016/j.sna.2006.08.010 ↗
8. Magnetic contactless detection of stress distribution and assembly defects in constructional steel element10.1016/j.ndteint.2005.02.011 ↗
9. Quantitative study of metal magnetic memory signal versus local stress concentration10.1016/j.ndteint.2010.05.007 ↗
10. Roskosz M.: Metal magnetic memory testing of welded joints of ferritic and austenitic steels, NDT&E Int 44 (2011) 305–310, 10.1016/j.ndteint.2011.01.008.
11. Dan Wang stress dependence of the spontaneous stray field signals of ferromagnetic steel10.1016/j.ndteint.2008.12.005 ↗
12. Analysis of changes in residual magnetic field in loaded notched samples10.1016/j.ndteint.2008.04.002 ↗
13. Analysis of relationships between residual magnetic field and residual stress10.1007/s11012-012-9582-x ↗
14. Analysis of the similarity between residual magnetic field distribution and the stress and strain state for 7CrMoVTiB10-10 (T/P24) steel10.3233/JAE-2012-1505 ↗
15. Evaluation of residual stresses and plastic deformations for iron-based materials by leakage magnetic flux sensors10.1016/S0925-8388(00)01226-3 ↗
16. Aharoni · 1996
17. Stanley, Dipole modelling of magnetic flux leakage10.1109/TMAG.2008.2011895 ↗
18. A fast method for rectangular crack sizes reconstruction in magnetic flux leakage testing10.1016/j.ndteint.2009.01.006 ↗
19. Debmalya Mukherjee, S. Saha, S. Mukhopadhyay, Inverse mapping of magnetic flux leakage signal for defect characterization, NDT&E Int, 〈http://dx.doi.org/10.1016/j.ndteint.2012.11.001〉.10.1016/j.ndteint.2012.11.001 ↗