Detecting and imaging stress corrosion cracking in stainless steel, with application to inspecting storage canisters for spent nuclear fuel
Source abstract
Abstract
Abstract One of the primary concerns with the long-term performance of storage systems for spent nuclear fuel (SNF) is the potential for corrosion due to deliquescence of salts deposited as aerosols on the surface of the canister, which is typically made of austentic stainless steel. In regions of high residual weld stresses, this may lead to localized stress-corrosion cracking (SCC). The ability to detect and image SCC at an early stage (long before the cracks are susceptible to propagate through the thickness of the canister wall and leaks of radioactive material may occur) is essential to the performance evaluation and licensing process of the storage systems. In this paper, we explore a number of nondestructive testing techniques to detect and image SCC in austenitic stainless steel. Our attention is focused on a small rectangular sample of 1 × 2 in2 with two cracks of mm-scale sizes. The techniques explored in this paper include nonlinear resonant ultrasound spectroscopy (NRUS) for detection, Linear Elastodynamic Gradient Imaging Technique (LEGIT), ultrasonic C-scan, vibrothermography, and synchrotron X-ray diffraction for imaging. Results obtained from these techniques are compared. Cracks of mm-scale sizes can be detected and imaged with all the techniques explored in this study.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques · Thermography and Photoacoustic Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Marine atmospheric stress corrosion cracking of austenitic stainless steels
2. EPRI 2014 · 2014
3. Bryan · 2014
4. Meyer · 2013
5. Toward robotic inspection for dry storage casks for spent nuclear fuel10.1115/1.4035788 ↗
6. Nondestructive inspection of spent nuclear fuel storage canisters using shear horizontal guided waves10.1016/j.net.2018.04.011 ↗
7. Blitz · 1996
8. Schmerr · 1998
9. Resonance and elastic nonlinear phenomena in rock10.1029/96JB00647 ↗
10. Nonlinear and nonequilibrium dynamics in geomaterials10.1103/PhysRevLett.93.065501 ↗
11. The mechanics of vibrothermography
12. The sources of heat generation in vibrothermography10.1016/j.ndteint.2011.07.012 ↗
13. In situ investigation of high humidity stress corrosion cracking of 7075 aluminum alloy by three-dimensional (3D) X-ray synchrotron tomography10.1080/21663831.2014.918907 ↗
14. X. Shan, and J. H. Payer, “Comparison of ceramic and polymer crevice formers on the crevice corrosion behavior of Ni-Cr-Mo alloy C-22”. In CORROSION 2007, NACE International.10.2172/893726 ↗
15. Comparison of crevice corrosion of Fe-based amorphous metal and crystalline Ni-Cr-Mo alloy10.1007/s11661-008-9697-9 ↗
16. Effect of polymer and ceramic crevice formers on the crevice corrosion of Ni-Cr-Mo alloy 2210.5006/1.3500833 ↗
17. Bray · 1997
18. Review of progress and applications in acoustic microscopy10.1121/1.1914661 ↗
19. Acoustic microscopy with mechanical scanning - a review10.1109/PROC.1979.11406 ↗
20. C-mode acoustic microscopy applied to integrated circuit package inspection10.1016/0038-1101(92)90245-8 ↗
21. Image analysis of delamination cracks in carbon-fibre composites by scanning acoustic microscopy10.1016/0266-3538(94)90038-8 ↗
22. Briggs · 1995
23. Maev · 2008
24. Nonlinear acoustic applications for material characterization: a review10.1139/p99-059 ↗
25. Fatigue damage assessment by nonlinear ultrasonic materials characterization10.1016/S0041-624X(97)00040-1 ↗
26. “The new wave in acoustic testing,” mat
27. Nonequilibrium and nonlinear dynamics in berea and fontainebleau sandstones: low-strain regime
28. Quantification of material nonlinearity in relation to microdamage density using nonlinear reverberation spectroscopy: experimental and theoretical study10.1121/1.3184583 ↗
29. Nonlinear resonant ultrasound spectroscopy of stress corrosion cracking in stainless steel rods10.1016/j.ndteint.2018.12.007 ↗
30. Multi-mode nonlinear resonance ultrasound spectroscopy for defect imaging: an analytical approach for the one-dimensional case10.1121/1.2735807 ↗
31. Localization of closed cracks using multi-mode nonlinear resonant ultrasound spectroscopy
32. Sonic infrared imaging of fatigue cracks10.1016/S0142-1123(01)00151-7 ↗
33. Gao · 2014 · vol. 131 · 229
34. Frictional heating model for efficient use of vibrothermography10.1016/j.ndteint.2009.01.012 ↗
35. The effect of crack closure on heat generation in vibrothermography
36. Phil · 2011
37. Fracture mechanics by three-dimensional crack-tip synchrotron X-ray microscopy10.1098/rsta.2013.0157 ↗
38. Superior techniques for eliminating ring artifacts in X-ray micro-tomography10.1364/OE.26.028396 ↗
39. In situ X-ray microtomography of stress corrosion cracking and corrosion fatigue in aluminum alloys
40. The imaging of failure in structural materials by synchrotron radiation X-ray microtomography10.1016/j.engfracmech.2017.07.027 ↗
41. Three-Dimensional visualisation of fatigue cracks in metals using high resolution synchrotron X-ray micro-tomography10.1179/174328406X114135 ↗
42. In situ experiments with X ray tomography: an attractive tool for experimental mechanics10.1007/s11340-010-9333-7 ↗
43. Image registration methods: a survey10.1016/S0262-8856(03)00137-9 ↗
44. Three-Dimensional fatigue crack growth behavior in an aluminum alloy investigated with in situ high-resolution synchrotron X-ray microtomography10.1016/j.actamat.2009.03.036 ↗
45. Direct measurement procedure for three-dimensional local crack driving force using synchrotron X-ray microtomography10.1016/j.actamat.2008.08.022 ↗