journal article·2023-12Open access

Study on non-contact measurement method of resistance spot weld nugget diameter using laser ultrasonic technique

Kazufumi Nomura, Shintaro Mishima, Soshi Deno, Tomokazu Sano

Abstract

Nomura K., Mishima S., Deno S., et al. Study on non-contact measurement method of resistance spot weld nugget diameter using laser ultrasonic technique. NDT and E International 140, 102973 (2023); https://doi.org/10.1016/j.ndteint.2023.102973. ; Resistance spot welding can instantaneously join two or more plates by the resistance heating of the metal and is in high demand owing to its high productivity and high-work efficiency. For the quality control of resistance spot welding, the size and quality of the welded part, called the nugget, are important. Therefore, this study aims to establish a highly efficient and high-speed resistance spot-weld inspection method that can be applied to whole-lot inspection, which is currently a difficult process. The objective of this study is to measure the nugget diameter using laser ultrasonic technique that enable remote, non-contact ultrasonic inspection. An investigation of the available ultrasonic waves using simulated test specimens demonstrated the feasibility of estimating the distance from the generation/detection point to the joint using the diffraction of the Lamb wave, which can propagate long distances in a thin plate. By measuring the actual resistance spot welding specimens, it was determined that differences in the nugget diameter of approximately 0.5 mm could be clearly distinguished from the arrival time of the diffraction waves. It was also inferred that the nugget diameter could be calculated by determining the propagation velocity of the diffraction wave with a similar accuracy to that of the measurement using a contact-type probe.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Development of automatic ultrasonic examination system for spot welding
2. Real time quality assessment in resistance spot welding process
3. Overview of recent advances of process analysis and quality control in resistance spot welding10.1016/j.ymssp.2019.01.041 ↗
4. Development of real-time diagnosis framework for angular misalignment of robot spot-welding system based on machine learning10.1016/j.promfg.2020.05.140 ↗
5. Highly reliable nondestructive testing technique for spot-welds in automotive bodies assembled from high tensional steel parts10.2320/materia.48.79 ↗
6. Influence of resistance spot welding process parameters on dissimilar austenitic and duplex stainless steel welded joints10.1177/0954408920933528 ↗
7. Aluminum/steel resistance spot welding process for multi-material car body10.2207/jjws.90.497 ↗
8. The most up-to-date radiographic examination technology10.2207/qjjws1943.70.6_646 ↗
9. Clarification of defect formation mechanism in friction stir welding by X-ray radiography10.2207/qjjws.32.31 ↗
10. Detection of weld defects in radiography films using image processing
11. Research on X-ray welding image defect detection based on convolution neural network10.1088/1742-6596/1237/3/032005 ↗
12. Initial tests for designing a high temperature EMAT with pulsed electromagnet10.1016/j.ndteint.2009.10.009 ↗
13. Air-coupled ultrasonic tomographic imaging of high-temperature flames10.1109/TUFFC.2003.1251135 ↗
14. Automatic inspection of spot welds by thermography10.1007/s10921-014-0233-0 ↗
15. Scruby · 1990
16. 2 - ultrasonic generation by pulsed lasers
17. FMC/TFM, the latest ultrasound testing technologies10.2207/jjws.88.96 ↗
18. Ultrasonic fast identification of automotive body spot weld defect based on echo characteristics qualitative analysis10.1179/174329306X153178 ↗
19. Spot weld analysis with 2D ultrasonic arrays10.6028/jres.109.015 ↗
20. Ultrasonic evaluation of spot welds by local immersion method10.2207/qjjws.15.58 ↗
21. Progress in NDT of resistance spot welding of aluminium using ultrasonic C-scan10.1016/j.ndteint.2012.02.005 ↗
22. Assessment of resistance spot welding quality based on ultrasonic testing and tree-based techniques10.1016/j.jmatprotec.2014.05.021 ↗
23. Spot welding inspection robot achieving labor saving and improvement of reliability using 3D ultrasonic inspection equipment
24. Robot-assisted non-destructive testing of automotive resistance spot welds10.1007/s40194-020-01002-1 ↗
25. Ultrasonic method for testing spot-welds10.2320/jinstmet.76.555 ↗
26. Non-contact evaluation of spot-welded nugget size based on measuring diffracted Lamb waves by focused air-coupled ultrasound
27. Thickness measurement for steel by the laser ultrasonic method
28. Sizing of micro cracks using laser-induced broad-band surface waves10.3327/jaesj.43.275 ↗
29. Pulsed laser-scanning laser Doppler vibrometer (PL-SLDV) phased arrays for damage detection in aluminum plates10.1016/j.ymssp.2018.11.016 ↗
30. Laser ultrasonic velocity measurement for phase transformation investigation in titanium alloy
31. Laser ultrasonic diagnostics of residual stress10.1016/j.ultras.2008.07.006 ↗
32. Weld piece visualization by laser-ultrasonic technique10.1299/kikaic.78.2824 ↗
33. In situ measurement of ultrasonic behavior during lap spot welding with laser ultrasonic method10.1016/j.ndteint.2022.102662 ↗
34. Non-contact ultrasonic measurements on steel at elevated temperatures10.1016/0963-8695(93)90472-7 ↗
35. An ultrasonic visualization system using a fiber-optic Bragg grating sensor and its application to damage detection at a temperature of 1000 °C10.1016/j.ymssp.2020.107140 ↗
36. Viktorov · 2013
37. Hayashi