Orthogonally polarised shear waves for evaluating anisotropy and cracks in metals
Source abstract
Abstract
The detection of crack-like defects using ultrasound is a problem widely studied by the non-destructive evaluation community. In this work, a technique of how to detect the presence of a crack-like defect and estimate its orientation in an anisotropic material by means of two orthogonal shear waves is presented. A detailed study of shear wave propagating and splitting at any incident angle, and its interaction with crack-like defects in anisotropic materials, is also presented. In this paper it is shown that by the use of two orthogonal shear waves with linear polarisation the authors could: 1) estimate the material level of anisotropy within approximately 0.5% of the measured value; 2) estimate the angular position of the principal shear directions of the material with respect to the orthogonal shear wave sources within ±5∘ accuracy; 3) excite a shear wave purely polarised along one of the principal shear directions with two orthogonal shear waves placed at an arbitrary angular position; 4) detect the presence of a crack-like defect in an anisotropic material based on the back-wall echoes of two orthogonal shear waves, 5) estimate the orientation of a crack-like defect in an anisotropic material within ~±5∘ of the theoretical value. The simulation and experimental results obtained show that the technique presented in this paper has potential to become an effective tool for crack-like defect detection and material characterisation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Shah, and Klaas [van Breugel]. Early age microstructure of portland cement mortar investigated by ultrasonic shear waves and numerical simulation10.1016/j.cemconres.2004.09.004 ↗
2. Utilization of ultrasonic measurements for determining the variations in microstructure of thermally degraded 2205 duplex stainless steel10.1063/1.3114098 ↗
3. Comparison of experimental measurements of material grain size using ultrasound10.1007/s10921-020-00675-4 ↗
4. Angle-beam shear wave scattering from buried crack-like defects in bonded specimens10.1063/1.4974544 ↗
5. Diffraction of elastic waves by cracks: application to time-of-flight inspection10.1016/0041-624X(83)90058-6 ↗
6. Shear-wave time of flight diffraction (s-tofd) technique10.1016/j.ndteint.2006.01.003 ↗
7. Crack growth monitoring using fundamental shear horizontal guided waves
8. Multiple wavemode scanning for near and far-side defect characterisation10.1007/s10921-019-0651-0 ↗
9. The measurement of residual stress in textured steel using an ultrasonic velocity combinations technique10.1016/0041-624X(84)90034-9 ↗
10. Determination of in-plane residual stress states in plates using horizontally polarized shear waves10.1063/1.332506 ↗
11. The measurement of applied and residual stresses in metals using ultrasonic waves10.1016/0022-460X(67)90186-1 ↗
12. Love · 1892
13. The interpretation of shear-wave splitting parameters in the presence of two anisotropic layers10.1111/j.1365-246X.1994.tb04027.x ↗
14. Diffraction of medium and long wavelength horizontally polarized shear waves by edge cracks10.1063/1.331070 ↗
15. 2018
16. Shear waves with orthogonal polarisations for thickness measurement and crack detection using emats10.1016/j.ndteint.2019.102212 ↗
17. Elastic shear wave scattering by randomly rough surfaces10.1016/j.jmps.2019.103852 ↗
18. Physic perspective fusion of electromagnetic acou stic transducer and pulsed eddy current testing in non-destructive testing system
19. On the plastic anisotropy of an aluminium alloy and its influence on constrained multiaxial flow10.1016/j.ijplas.2011.05.017 ↗
20. Optimization of the bias magnetic field of shear wave emats10.1109/TUFFC.2016.2558467 ↗
21. Laboratory observations of shear-wave propagation in anisotropic media10.1190/1.1436871 ↗
22. Acoustoelasticity in transversely isotropic materials10.1121/1.390903 ↗
23. Numerical modelling of the scattering of elastic waves in plates10.1007/BF00566400 ↗