Accurate wave velocity measurement from diffuse wave fields
Source abstract
Abstract
Directional wave speeds variations in anisotropic elastic solids enables material characterisation capabilities, such as determination of elastic constants and volumetric measurement of crystallographic texture. However, achieving such measurements is challenging especially on samples with complex geometries. Here we propose the use of Green’s Function reconstruction from diffuse ultrasonic wave fields for accurate velocity measurements on components with arbitrary geometries. Strategies for accurate reconstruction, including averaging over an increased number of different source locations, using longer window lengths of diffuse fields, and accurately deconvolving a source-dependent factor, were implemented to achieve satisfactory convergence towards Green’s Function. Additionally, low signal intensity challenges from laser interferometers were overcome to enable non-contact measurement of the wave speeds, by making use of simultaneous excitation of sources to increase signal-to-noise ratio and signal normalisation to account for energy dissipation of diffuse fields. With successful demonstration using both phased array and laser receivers, this advancement fundamentally broadens acoustic wave velocity measurement capabilities to a wider range of environments and holds promise for future material characterisation of complex-shaped components.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Seismic Waves and Analysis · Seismic Imaging and Inversion Techniques · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Ashby · 1999
2. Measurement of the elastic constants of fibre composites by ultrasonics10.1016/0010-4361(70)90477-5 ↗
3. Ultrasonic elastic constants of carbon fibers and their composites10.1063/1.1661559 ↗
4. Ultrasonic through-transmission characterization of thick fibre-reinforced composites10.1016/S0963-8695(96)00014-X ↗
5. Double through-transmission bulk wave method for ultrasonic phase velocity measurement and determination of elastic constants of composite materials10.1121/1.402847 ↗
6. A generalized spherical harmonic deconvolution to obtain texture of cubic materials from ultrasonic wave speed10.1016/j.jmps.2015.06.012 ↗
7. A spherical harmonic approach for the determination of HCP texture from ultrasound: A solution to the inverse problem10.1016/j.jmps.2015.06.014 ↗
8. Rapid measurement of volumetric texture using resonant ultrasound spectroscopy10.1016/j.scriptamat.2018.07.029 ↗
9. Direct volumetric measurement of crystallographic texture using acoustic waves10.1016/j.actamat.2018.08.037 ↗
10. High precision corrosion monitoring using ultrasonic techniques10.5006/2586 ↗
11. High-accuracy ultrasonic corrosion rate monitoring10.5006/2586 ↗
12. Simultaneous ultrasonic velocity and sample thickness measurement and application in composites10.1121/1.405279 ↗
13. Measurement of acoustic dispersion using both transmitted and reflected pulses10.1121/1.428263 ↗
14. An ultrasonic pulse-echo technique for monitoring the setting of CaSO 4-based bone cement10.1016/S0142-9612(02)00253-3 ↗
15. Relation between hardness and ultrasonic velocity on pipeline steel welded joints10.1080/10589759.2015.1074231 ↗
16. 2022
17. Comparative analysis of through-transmission ultrasonic bulk wave methods for phase velocity measurements in anisotropic materials10.1121/1.409984 ↗
18. Precision laser-ultrasonic velocity measurement and elastic constant determination10.1016/0041-624X(89)90059-0 ↗
19. Measurement by LASER-generated ultrasound of four stiffness coefficients of an anisotropic material at elevated temperatures10.1023/A:1022620501899 ↗
20. Improved laser ultrasonic systems for industry10.1063/1.4864847 ↗
21. Directivity patterns of laser-generated sound in solids: Effects of optical and thermal parameters10.1016/j.ultras.2016.01.011 ↗
22. On the emergence of the green’s function in the correlations of a diffuse field10.1121/1.1417528 ↗
23. On the emergence of the green’s function in the correlations of a diffuse field: pulse-echo using thermal phonons10.1016/S0041-624X(02)00156-7 ↗
24. Measurement and prediction of diffuse fields in structures10.1121/1.428189 ↗
25. Rayleigh-wave group-velocity of the icelandic crust from correlation of ambient seismic noise
26. Virtual real source: Source signature estimation using seismic interferometry10.1190/geo2013-0069.1 ↗
27. Interaction of solid earth, atmosphere, and ionosphere
28. Long-range correlations in the diffuse seismic coda10.1126/science.1078551 ↗
29. High-resolution surface-wave tomography from ambient seismic noise10.1126/science.1108339 ↗
30. Passive correlation imaging of a buried scatterer10.1121/1.2200049 ↗
31. Detection and localization of a defect in a reverberant plate using acoustic field correlation
32. Diffuse field full matrix capture for near surface ultrasonic imaging10.1016/j.ultras.2017.07.009 ↗
33. Wavenumber imaging of near-surface defects in rails using green’s function reconstruction of ultrasonic diffuse fields
34. Phase coherence imaging for near-surface defects in rails using cross-correlation of ultrasonic diffuse fields10.3390/met9080868 ↗
35. Sparse-TFM imaging of lamb waves for the near-distance defects in plate-like structures10.3390/met9050503 ↗
36. On diffuse waves in solid media10.1121/1.387816 ↗
37. The mean and variance of diffuse field correlations in finite bodies10.1121/1.2109307 ↗
38. Emergence rate of the time-domain green’s function from the ambient noise cross-correlation function10.1121/1.2109059 ↗
39. Fluctuations of correlations and green’s function reconstruction: Role of scattering
40. Fluctuations in diffuse field–field correlations and the emergence of the green’s function in open systems10.1121/1.1898683 ↗
41. Ultrasonics in an aluminum foam
42. Characterization of cement-based materials using diffuse ultrasound
43. Characterization of ultrasound energy diffusion due to small-size damage on an aluminum plate using piezoceramic transducers
44. Recovering the green’s function from field-field correlations in an open scattering medium (l)10.1121/1.1570436 ↗
45. Imaging from one-bit correlations of wideband diffuse wave fields10.1063/1.1739529 ↗
46. Accelerated finite element elastodynamic simulations using the GPU10.1016/j.jcp.2013.10.017 ↗
47. TMTeck On Site Checking 1018 Steel V2 Ultrasonic Calibration Block. https://www.tmteck-ndt.com/sale-12692571-on-site-checking-1018-steel-v2-ultrasonic-calibration-block.html.
48. Elastic wave thermal fluctuations, ultrasonic waveforms by correlation of thermal phonons10.1121/1.1564017 ↗
49. Emergence of broadband Rayleigh waves from correlations of the ambient seismic noise
50. Extracting time-domain green’s function estimates from ambient seismic noise
51. Processing seismic ambient noise data to obtain reliable broad-band surface wave dispersion measurements10.1111/j.1365-246X.2007.03374.x ↗
52. Reconstruction of Rayleigh–lamb dispersion spectrum based on noise obtained from an air-jet forcing10.1121/1.2799913 ↗
53. The one-bit noise correlation: A theory based on the concepts of coherent and incoherent noise10.1111/j.1365-246X.2010.04923.x ↗
54. Three-dimensional time-harmonic elastodynamic green’s functions for anisotropic solids
55. Determination of (C11 - C12) in ti-36nb-2ta-3zr-0.3o (wt.%) (gum metal)10.1016/j.scriptamat.2008.05.022 ↗
56. The Wiener (root mean square) error criterion in filter design and prediction10.1002/sapm1946251261 ↗
57. Potential and limitations of a deconvolution approach for guided wave structural health monitoring10.1177/1475921709102086 ↗
58. Flaw signature estimation in ultrasonic nondestructive evaluation using the Wiener filter with limited prior information10.1109/58.251283 ↗
59. Finite element modelling strategy for determining directivity of thermoelastically generated laser ultrasound
60. Rokhlin · 2011