journal article·2022-01-19Open access

A machine learning approach to map crystal orientation by optical microscopy

Mallory Wittwer, Matteo Seita

npj Computational Materials· Volume 8· Issue 1

Abstract

Abstract Mapping grain orientation in crystalline solids is essential to investigate the relationships between local microstructure and crystallography and interpret materials properties. One of the main techniques used to perform these studies is electron backscatter diffraction (EBSD). Due to the limited measurement throughput, however, EBSD is not suitable for characterizing samples with long-range microstructure heterogeneity, nor for building large material libraries that include numerous specimens. We present a machine learning approach for high-throughput crystal orientation mapping, which relies on the optical technique called directional reflectance microscopy. We successfully apply our method on Inconel 718 specimens produced by additive manufacturing, which exhibit complex, spatially-varying microstructures. These results demonstrate that optical orientation mapping on a metal alloy is achievable. Since our method is data-driven, it can be easily extended to different alloy systems produced using different manufacturing processes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Machine Learning in Materials Science · Thermography and Photoacoustic Techniques · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Sofinowski, K. A., Raman, S., Wang, X., Gaskey, B. & Seita, M. Layer-wise engineering of grain orientation (LEGO) in laser powder bed fusion of stainless steel 316L. Addit. Manuf. 38, 101809 (2021).
2. Manninen, T. et al. EBSD. Mater. Sci. 86, 1689–1699 (2011).
3. Humphreys, F. J. Quantitative metallography by electron backscattered diffraction. J. Microsc. 195, 170–185 (1999).10.1046/j.1365-2818.1999.00578.x ↗
4. Potyrailo, R. et al. Combinatorial and high-throughput screening of materials libraries: review of state of the art. ACS Combinatorial Sci. 13, 579–633 (2011).10.1021/co200007w ↗
5. Seita, M., Wittwer, M. & Wang, X. Optical metallography of fusion-based additively manufactured metals. Encyclopedia of Materials: Metals and Alloys 3, 193–202 (2022).
6. Seita, M., Nimerfroh, M. M. & Demkowicz, M. J. Acquisition of partial grain orientation information using optical microscopy. Acta Materialia 123, 70–81 (2017).10.1016/j.actamat.2016.10.021 ↗
7. Seita, M. et al. A high-throughput technique for determining grain boundary character non-destructively in microstructures with through-thickness grains. npj Comput. Mater 2, 16016 (2016).10.1038/npjcompumats.2016.16 ↗
8. Jin, K. W. & De Graef, M. c-Axis orientation determination of α-titanium using computational polarized light microscopy. Mater. Charact. 167, 110503 (2020).10.1016/j.matchar.2020.110503 ↗
9. Ilchenko, O. et al. Fast and quantitative 2D and 3D orientation mapping using Raman microscopy. Nat. Commun. 10, 1–10 (2019).10.1038/s41467-019-13504-8 ↗
10. Wang, X., Gao, S., Jain, E., Gaskey, B. & Seita, M. Measuring crystal orientation from etched surfaces via directional reflectance microscopy. J. Mater. Sci. 55, 11669–11678 (2020).10.1007/s10853-020-04734-z ↗
11. Gaskey, B., Hendl, L., Wang, X. & Seita, M. Optical characterization of grain orientation in crystalline materials. Acta Materialia 194, 558–564 (2020).10.1016/j.actamat.2020.05.027 ↗
12. Zhou, S. & Seita, M. Large-area surface topography analysis of additively manufactured metallic materials using directional reflectance microscopy. Mater. Sci. Eng. A 760, 489–497 (2019).10.1016/j.msea.2019.05.108 ↗
13. Sangwal, K. (ed) in Etching of Crystals Ch. 3, Elsevier (1987).
14. Sangwal, K. (ed) in Etching of Crystals Ch. 11, Elsevier (1987).
15. Sangwal, K. (ed) in Etching of Crystals Ch. 8, Elsevier (1987).
16. Szczotok, A. & Reichel, H. Methodology for revealing the phases and microstructural constituents of the CMSX-4 Nickel-based superalloy implicating their computer-aided detection for image analysis. Materials 13, 341 (2020).10.3390/ma13020341 ↗
17. Jha, D. et al. Extracting grain orientations from EBSD patterns of polycrystalline materials using convolutional neural networks. Microsc. Microanalysis 24, 497–502 (2018).10.1017/S1431927618015131 ↗
18. Dass, A. & Moridi, A. State of the art in directed energy deposition: from additive manufacturing to materials design. Coatings 9, 418 (2019).10.3390/coatings9070418 ↗
19. Polonsky, A. T. et al. 3D characterization of the columnar-to-equiaxed transition in additively manufactured Inconel 718. Superalloys 2020, 990–1002 (2020).
20. Chadwick, A. F. & Voorhees, P. W. The development of grain structure during additive manufacturing. Acta Materialia 211, 116862 (2021).10.1016/j.actamat.2021.116862 ↗
21. Chen, B. & Mazumder, J. Role of process parameters during additive manufacturing by direct metal deposition of Inconel 718. Rapid Prototyp. J. 23, 919–929 (2017).10.1108/RPJ-05-2016-0071 ↗
22. Dehmas, M., Lacaze, J., Niang, A. & Viguier, B. TEM study of high-temperature precipitation of delta phase in Inconel 718 alloy. Adv. Mater. Sci. Eng. 2011, 940634 (2011).10.1155/2011/940634 ↗
23. Mahadevan, S. et al. Evolution of delta phase microstructure in alloy 718. In Proc. 7th International Symposium on Superalloy 718 and Derivatives. TMS, Pittsburg, PA, USA, 737–750 (2010).10.7449/2010/Superalloys_2010_737_750 ↗
24. Nunes, R. M., Pereira, D., Clarke, T. & Hirsch, T. K. Delta phase characterization in inconel 718 alloys through x-ray diffraction. ISIJ Int. 55, 2450–2454 (2015).10.2355/isijinternational.ISIJINT-2015-111 ↗
25. Krizhevsky, A. & Hinton, G. E. ImageNet classification with deep convolutional neural networks. Adv. Neural Inf. Process. Syst. 25, 1–9 (2012).
26. Szegedy, C., Ioffe, S., Vanhoucke, V. & Alemi, A. Inception-v4, inception-ResNet and the impact of residual connections on learning. CoRR abs/1602.07261 (2016).10.1609/aaai.v31i1.11231 ↗
27. Kelley, H. J. Gradient theory of optimal flight paths. Ars. J. 30, 947–954 (1960).10.2514/8.5282 ↗
28. Bottou, L. Stochastic gradient learning. Proceedings of Neuro-Nımes, 91, 1991.
29. Weiss, K., Khoshgoftaar, T. M. & Wang, D. D. A Survey of Transfer Learning (Springer, 2016).10.1186/s40537-016-0043-6 ↗
30. Mishra, P. & Passos, D. Deep calibration transfer: transferring deep learning models between infrared spectroscopy instruments. Infrared Phys. Technol. 117, 1–10 (2021).10.1016/j.infrared.2021.103863 ↗
31. Holm, E. A. et al. Overview: computer vision and machine learning for microstructural characterization and analysis. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 51, 5985–5999 (2020).10.1007/s11661-020-06008-4 ↗
32. Martin, J. & Elster, C. Detecting unusual input to neural networks. Appl Intell 51, 2198–2209 (2021).10.1007/s10489-020-01925-8 ↗
33. Jolliffe, I. T. & Cadima, J. Principal component analysis: a review and recent developments. Philos. Trans. R. Soc. A 374, 20150202 (2016).10.1098/rsta.2015.0202 ↗
34. Chen, Y. Y. et al. Multiscale microstructural heterogeneity and mechanical property scatter in Inconel 718 produced by directed energy deposition. J. Alloy. Compd. 887, 161426 (2021).10.1016/j.jallcom.2021.161426 ↗
35. Sánchez Pérez, J., Meinhardt-Llopis, E. & Facciolo, G. TV-L1 optical flow estimation. Image Process. Line 3, 137–150 (2013).10.5201/ipol.2013.26 ↗
36. Abadi, M. et al. TensorFlow: a system for large-scale machine learning. In Proc. 12th USENIX Symposium on Operating Systems Design and Implementation, USENIX Association, OSDI. 265–283 (2016).
37. Chollet, F. Keras. Github. https://github.com/fchollet/keras (2015).
38. Kingma, D. P. & Ba, J. Adam: a method for stochastic optimization. In Proc. 3rd International Conference for Learning Representations. ICLR, 1–15 (2015).
39. Wittwer, M., Gaskey, B. & Seita, M. An automated and unbiased grain segmentation method based on directional reflectance microscopy. Mater. Charact. 174, 110978 (2021).10.1016/j.matchar.2021.110978 ↗
40. Dong, X. & Hua, L. Euclidean distance transform of digital images in arbitrary dimensions. Lect. Notes Computer Sci. (including Subser. Lect. Notes Artif. Intell. Lect. Notes Bioinforma.) 4261, 72–79 (2006).
41. Shorten, C. & Khoshgoftaar, T. M. A survey on image data augmentation for deep learning. J. Big Data 6, 60 (2019).10.1186/s40537-019-0197-0 ↗