Dislocations interaction induced structural instability in intermetallic Al2Cu
Source abstract
Abstract
Abstract Intermetallic precipitates are widely used to tailor mechanical properties of structural alloys but are often destabilized during plastic deformation. Using atomistic simulations, we elucidate structural instability mechanisms of intermetallic precipitates associated with dislocation motion in a model system of Al2Cu. Interaction of non-coplanar <001> dislocation dipoles during plastic deformation results in anomalous reactions—the creation of vacancies accompanied with climb and collective glide of <001> dislocation associated with the dislocation core change and atomic shuffle—accounting for structural instability in intermetallic Al2Cu. This process is profound with decreasing separation of non-coplanar dislocations and increasing temperature and is likely to be operative in other non-cubic intermetallic compounds as well.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Umakshi, Y. in Materials Science and Technology: A Comprehensive Treatment, Vol. 6, Plastic Deformation and Fracture of Materials (eds Cahn, R. W., et al.) (VCH Publishers, 1993) Ch. 6, 251-310.
2. Park, J. M. et al. High-strength bulk Al-based bimodal ultrafine eutectic composite with enhanced plasticity. J. Mater. Res. 24, 2605–2609 (2009).10.1557/jmr.2009.0297 ↗
3. Park, J. M. et al. Multi-phase Al-based ultrafine composite with multi-scale microstructure. Intermetallics 18, 1829–1833 (2010).10.1016/j.intermet.2010.02.042 ↗
4. Witkin, D., Lee, Z., Rodriguez, R., Nutt, S. & Lavernia, E. Al–Mg alloy engineered with bimodal grain size for high strength and increased ductility. Scr. Mater 49, 297–302 (2003).10.1016/S1359-6462(03)00283-5 ↗
5. Li, X., Ren, Z., Fautrelle, Y., Zhang, Y. & Esling, C. Morphological instabilities and alignment of lamellar eutectics during directional solidification under a strong magnetic field. Acta Mater. 58, 1403–1417 (2010).10.1016/j.actamat.2009.10.048 ↗
6. Tiwary, C. S., Roy Mahapatra, D. & Chattopadhyay, K. Effect of length scale on mechanical properties of Al-Cu eutectic alloy. Appl. Phys. Lett. 101, 171901 (2012).10.1063/1.4761944 ↗
7. Lee, S. W. et al. Micro-to-nano-scale deformation mechanisms of a bimodal ultrafine eutectic composite. Sci. Rep 4, 6500 (2014).10.1038/srep06500 ↗
8. Cabibbo, M. Partial dissolution of strengthening particles induced by equal channel angular pressing in an Al–Li–Cu alloy. Mater. Charact. 68, 7–13 (2012).10.1016/j.matchar.2012.03.005 ↗
9. Murayama, M., Horita, Z. & Hono, K. Microstructure of two-phase Al–1.7at%Cu alloy deformed by equal-channel angular pressing. Acta Mater. 49, 21–29 (2001).10.1016/S1359-6454(00)00308-6 ↗
10. Korznikov, A. V. et al. Nanocrystalline structure and phase transformation of the intermetallic compound TiAl processed by severe plastic deformation. Nanostruct. Mater. 11, 17–23 (1999).10.1016/S0965-9773(98)00157-3 ↗
11. Senkov, O. N., Froes, F. H., Stolyarov, V. V., Valiev, R. Z. & Liu, J. Microstructure of Aluminum-Iron alloys subjected to severe plastic deformation. Scr. Mater 38, 1511–1516 (1998).10.1016/S1359-6462(98)00073-6 ↗
12. Inoue, A. Amorphous, nanoquasicrystalline and nanocrystalline alloys in Al-based systems. Prog. Mater. Sci. 43, 365–520 (1998).10.1016/S0079-6425(98)00005-X ↗
13. Zhang, X., Hashimoto, T., Lindsay, J. & Zhou, X. Investigation of the de-alloying behaviour of θ-phase (Al2Cu) in AA2024-T351 aluminium alloy. Corros. Sci. 108, 85–93 (2016).10.1016/j.corsci.2016.03.003 ↗
14. Liu, G. Time-Resolved and Three-Dimensional Study of Dislocation-Particle Interactions in Aluminum and Copper Alloys (University of Illinois at Urbana-Champaign, 2011).
15. Bonnet, R. HRTEM observation of a <113> low angle tilt boundary in the Al–Al2Cu (θ) Eutectic composite. Phys. Stat. Sol.(a) 189, 183–196 (2002).10.1002/1521-396X(200201)189:1<183::AID-PSSA183>3.0.CO;2-M ↗
16. Nie, J. F. & Muddle, B. C. Comments on the “dislocation interaction with semicoherent precipitates (ω phase) in deformed Al-Cu-Mg-Ag alloy”. Scr. Mater 42, 409–413 (2000).10.1016/S1359-6462(99)00345-0 ↗
17. Salehinia, I., Shao, S., Wang, J. & Zbib, H. M. Interface structure and the inception of plasticity in Nb/NbC nanolayered composites. Acta Mater. 86, 331–340 (2015).10.1016/j.actamat.2014.12.026 ↗
18. Wang, J., Zhou, Q., Shao, S. & Misra, A. Strength and plasticity of nanolaminated materials. Mater. Res. Lett 5, 1–19 (2017).10.1080/21663831.2016.1225321 ↗
19. Gridnev, V. N. & Gavrilyuk, V. G. Cementite decomposition in steel during plastic deformation. (Review). Phys. Met. (USSR) 4, 531–551 (1982).
20. Appel, F. Diffusion assisted dislocation climb in intermetallic gamma TiAl. Mater. Sci. Eng. A 317, 115–127 (2001).10.1016/S0921-5093(01)01169-8 ↗
21. Anton, D. L., Shah, D. M., Duhl, D. N. & Giamei, A. F. Selecting high-temperature structural intermetallic compounds: the engineering approach. JOM 41, 12–17 (1989).10.1007/BF03220324 ↗
22. Hirth, J. P. and Lothe, J. Theory of Dislocations (Krieger Publishing Company, 1982).
23. Schroll, R., Vitek, V. & Gumbsch, P. Core properties and motion of dislocations in NiAl. Acta Mater. 46, 903–918 (1998).10.1016/S1359-6454(97)00305-4 ↗
24. Russell, K. C. & Ashby, M. F. Slip in aluminum crystals containing strong, plate-like particles. Acta Metall 18, 891–901 (1970).10.1016/0001-6160(70)90017-9 ↗
25. Chanda, T. & Murty, G. S. Plastic behaviour of CuAl2. J. Mater. Sci. 27, 5931–5934 (1992).10.1007/BF01119763 ↗
26. Ignat, M. & Durand, F. Deformation lines on Al2Cu single crystals after creep in compression. Scr. Metall 10, 623–626 (1976).10.1016/0036-9748(76)90192-7 ↗
27. Knowles, K. M. & Stobbs, W. M. The structure of {111} age-hardening precipitates in Al–Cu–Mg–Ag alloys. Acta Crystall. Section B: Struct. Sci 44, 207–227 (1988).10.1107/S0108768187012308 ↗
28. Bonnet, R. & Loubradou, M. Crystalline defects in a BCT Al2Cu(θ) single crystal obtained by unidirectional solidification along [001]. Phys. Stat. Sol. (a) 194, 173–191 (2002).10.1002/1521-396X(200211)194:1<173::AID-PSSA173>3.0.CO;2-P ↗
29. Zhou, Q. et al. Atomistic study of fundamental character and motion of dislocations in intermetallic Al2Cu. Int. J. Plastic. 87, 100–113 (2016).10.1016/j.ijplas.2016.09.005 ↗
30. Chu, H. J., Wang, J. & Beyerlein, I. J. Anomalous reactions of a supersonic coplanar dislocation dipole: bypass or twinning? Scr. Mater 67, 69–72 (2012).10.1016/j.scriptamat.2012.03.027 ↗
31. Wang, J., Woo, C. H. & Huang, H. Destabilization of dislocation dipole at high velocity. Appl. Phys. Lett. 79, 3621–3623 (2001).10.1063/1.1421425 ↗
32. Wang, J., Hoagland, R. G., Liu, X. Y. & Misra, A. The influence of interface shear strength on the glide dislocation–interface interactions. Acta Mater. 59, 3164–3173 (2011).10.1016/j.actamat.2011.01.056 ↗
33. Chu, F. & Pope, D. P. Deformation twinning in intermetallic compounds—the dilemma of shears vs. shuffles. Mater. Sci. Eng. A 49, 39–47 (1993).10.1016/0921-5093(93)90367-N ↗
34. Hirth, J. P., Wang, J. & Tomé, C. N. Disconnections and other defects associated with twin interfaces. Prog. Mater. Sci. 83, 417–471 (2016).10.1016/j.pmatsci.2016.07.003 ↗
35. Wang, J. et al. Pure-shuffle nucleation of deformation twins in hexagonal-close-packed metals. Mater. Res. Lett. 1, 126–132 (2013).10.1080/21663831.2013.792019 ↗
36. Wang, J., Hoagland, R. G. & Misra, A. Room-temperature dislocation climb in metallic interfaces. App. Phys. Lett. 94, 131910 (2009).10.1063/1.3111137 ↗
37. Li, N., Wang, J., Huang, J. Y., Misra, A. & Zhang, X. In situ TEM observations of room temperature dislocation climb at interfaces in nanolayered Al/Nb composites. Script. Mater 63, 363–366 (2010).10.1016/j.scriptamat.2010.04.005 ↗
38. Jiao, Z., McMurtrey, M. D. & Was, G. S. Strain-induced precipitate dissolution in an irradiated austenitic alloy. Scr. Mater 65, 159–162 (2011).10.1016/j.scriptamat.2011.04.003 ↗
39. Song, M. et al. Deformation-induced dissolution and growth of precipitates in an Al–Mg–Er alloy during high-cycle fatigue. Acta Mater. 81, 409–419 (2014).10.1016/j.actamat.2014.08.061 ↗
40. Murayama, M. Z. & Hono., K. Microstructure of two-phase Al–1.7 at% Cu Alloy deformed by equal-channel angular pressing. Acta Mater. 49, 21–29 (2001).10.1016/S1359-6454(00)00308-6 ↗
41. Hashimoto, T. et al. Investigation of dealloying of S phase (Al2CuMg) in AA 2024-T3 aluminium alloy using high resolution 2D and 3D electron imaging. Corros. Sci. 103, 157–164 (2016).10.1016/j.corsci.2015.11.013 ↗
42. Lebouil, S. et al. Dealloying of Al2 Cu, Al7Cu2Fe, and Al2CuMg intermetallic phases to form nanoparticulate copper films. Mater. Corros. 65, 416–424 (2014).10.1002/maco.201307550 ↗
43. Wolverton, C. Crystal structure and stability of complex precipitate phases in Al–Cu–Mg–(Si) and Al–Zn–Mg alloys. Acta Mater. 49, 3129–3142 (2001).10.1016/S1359-6454(01)00229-4 ↗
44. Yamagiwa, K. et al. Novel recycling system of aluminum and iron aastes-in-situ Al-Al3Fe functionally graded material manufactured by a centrifugal method. Mater. Trans. 44, 2461–2467 (2003).10.2320/matertrans.44.2461 ↗
45. Rajan, T. P. D., Pillai, R. M. & Pai, B. C. Functionally graded Al–Al3Ni in situ intermetallic composites: Fabrication and microstructural characterization. J. Alloys Comp 453, L4–L7 (2008).10.1016/j.jallcom.2006.11.181 ↗
46. Purja Pun, G. P. & Mishin, Y. Development of an interatomic potential for the Ni-Al system. Philo. Mag 89, 3245–3267 (2009).10.1080/14786430903258184 ↗