journal article·2025-05-13Open access

Oxygen-driven shell-like microstructure: a pathway to high-performance PVD Cr coatings for metal protection

Meiqi Zhang, Li Wang, Zhenyu Wang, Yong Cheng, Guanshui Ma, Shiyao Tan, Peiling Ke, Aiying Wang

npj Materials Degradation· Volume 9· Issue 1

Abstract

Chromium (Cr) coatings, known for their corrosion resistance and luster, often suffer from coarse columnar grains when fabricated by physical vapor deposition (PVD), limiting their performance. This study employs high-power impulse magnetron sputtering (HiPIMS) with oxygen doping (8.3 at.%) to enhance Cr coatings on 316 L stainless steel. The optimized coating exhibits a unique shell-like microstructure, increasing hardness by 55% and improving crack resistance. Oxygen doping also reduces corrosion current density by over an order of magnitude, forming a continuous, low-defect amorphous passivation film for superior corrosion protection. This approach offers a simple yet effective strategy to advance Cr coating performance for industrial applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Safavi, M. S., Ghazijahani, S. S. & Rasooli, A. Pulsed electroplating of ZrO2-reinforced Ni-Cr alloy coatings from the duplex complexing agents-containing bath for engineering applications: Importance of operating conditions. Heliyon 10, e37631 (2024).10.1016/j.heliyon.2024.e37631 ↗
2. Mozetič, M. Surface modification to improve properties of materials. Materials 12, 441 (2019).10.3390/ma12030441 ↗
3. Ponte, F., Sharma, P., Figueiredo, N. M., Ferreira, J. & Carvalho, S. Decorative Chromium Coatings on Polycarbonate Substrate for the Automotive Industry. Materials 16, 2315 (2023).10.3390/ma16062315 ↗
4. Wint, N., Warren, D., DeVooys, A. & McMurray, H. The use of chromium and chromium (III) oxide PVD coatings to resist the corrosion driven coating delamination of organically coated packaging steel. J. Electrochem. Soc. 167, 141506 (2020).10.1149/1945-7111/abc360 ↗
5. Parsa, Y. et al. Effect of oxygen partial pressure on the semiconducting properties of thermally grown chromia on pure chromium. Corros. Sci. 141, 46–52 (2018).10.1016/j.corsci.2018.06.038 ↗
6. Lozano-Morales, A., Renz, R., Fortman, J. & Taylor, E. Electrically mediated process for functinal and decorative trivalent chromium electroplating: an alternative to hexavalent chromium. ECS Trans. 6, 51–61 (2007).10.1149/1.2790401 ↗
7. Liang, A. & Zhang, J. Why the decorative chromium coating electrodeposited from trivalent chromium electrolyte containing formic acid is darker. Surf. Coat. Technol. 206, 3614–3618 (2012).10.1016/j.surfcoat.2012.02.053 ↗
8. Teixeira, L. A. C. & Santini, M. C. Surface conditioning of ABS for metallization without the use of chromium baths. J. Mater. Process. Technol. 170, 37–41 (2005).10.1016/j.jmatprotec.2005.04.075 ↗
9. Pinheiro, X. L. et al. The combination of electrodeposited chromium (III) and PVD as an industrial viable solution for the replacement of electrodeposited chromium (VI). Process Saf. Environ. Prot. 182, 727–739 (2024).10.1016/j.psep.2023.12.018 ↗
10. Christoforou, P., Dowding, R., Pinna, C. & Lewis, R. Two-layer laser clad coating as a replacement for chrome electroplating on forged steel. P I Mech. Eng. C.-j. Mec. 235, 7120–7138 (2021).
11. Wang, Q., Luo, S., Wang, S., Wang, H. & Ramachandran, C. S. Wear, erosion and corrosion resistance of HVOF-sprayed WC and Cr3C2 based coatings for electrolytic hard chrome replacement. Int. J. Refract. Met. Hard Mater. 81, 242–252 (2019).10.1016/j.ijrmhm.2019.03.010 ↗
12. Safavi, M. S. & Rasooli, A. The positive contribution of Cr2O3 reinforcing nanoparticles to enhanced corrosion and tribomechanical performance of Ni–Mo alloy layers electrodeposited from a citrate-sulfate bath. J. Mater. Res Technol. 28, 865–878 (2024).10.1016/j.jmrt.2023.12.014 ↗
13. Agüero, A. et al. HVOF-Deposited WCCoCr as Replacement for Hard Cr in Landing Gear Actuators. J. Therm. Spray. Technol. 20, 1292–1309 (2011).10.1007/s11666-011-9686-1 ↗
14. Navinšek, B., Panjan, P. & Milošev, I. PVD coatings as an environmentally clean alternative to electroplating and electroless processes. Surf. Coat. Technol. 116-119, 476–487 (1999).10.1016/S0257-8972(99)00145-0 ↗
15. Legg, K. O. et al. The replacement of electroplating. Surf. Coat. Technol. 81, 99–105 (1996).10.1016/0257-8972(95)02653-3 ↗
16. Martinuzzi, S. et al. A Comparative Research on Corrosion Behavior of Electroplated and Magnetron Sputtered Chromium. Coat. Coat. 12, 257 (2022).
17. Wang, S., Miao, Y. & Si, C. A novel CrCx/C-Cr multilayer PVD coating for cotton picking spindle: Committed to replacing traditional electroplated chromium coating. Phys. Scr. 99, 025016 (2024).10.1088/1402-4896/ad1c22 ↗
18. He, J. et al. Modification of Cr/CrN composite structure by Fe addition and its effect on decorative performance and corrosion resistance. Ceram. Int. 47, 23888–23894 (2021).10.1016/j.ceramint.2021.05.097 ↗
19. Wu, J. et al. High vacuum arc ion plating Cr film for promoting high temperature applicability of Cu. Corros. Sci. 207, 110575 (2022).10.1016/j.corsci.2022.110575 ↗
20. Wang, Z. et al. Comparative study on protective Cr coatings on nuclear fuel cladding Zirlo substrates by AIP and HiPIMS techniques. Ceram. Int. 49, 22736–22744 (2023).10.1016/j.ceramint.2023.04.074 ↗
21. Mutyala, K. C., Ghanbari, E. & Doll, G. L. Effect of deposition method on tribological performance and corrosion resistance characteristics of CrxN coatings deposited by physical vapor deposition. Thin Solid Films 636, 232–239 (2017).10.1016/j.tsf.2017.06.013 ↗
22. Kouznetsov, V., Macák, K., Schneider, J. M., Helmersson, U. & Petrov, I. A novel pulsed magnetron sputter technique utilizing very high target power densities. Surf. Coat. Technol. 122, 290–293 (1999).10.1016/S0257-8972(99)00292-3 ↗
23. Hecimovic, A. & Ehiasarian, A. Time evolution of ion energies in HIPIMS of chromium plasma discharge. J. Phys. D: Appl. Phys. 42, 135209 (2009).10.1088/0022-3727/42/13/135209 ↗
24. Helmersson, U., Lattemann, M., Bohlmark, J., Ehiasarian, A. P. & Gudmundsson, J. T. Ionized physical vapor deposition (IPVD): A review of technology and applications. Thin Solid Films 513, 1–24 (2006).10.1016/j.tsf.2006.03.033 ↗
25. Zhang, D. et al. Comparative study on protective properties of CrN coatings on the ABS substrate by DCMS and HiPIMS techniques. Surf. Coat. Technol. 394, 125890 (2020).10.1016/j.surfcoat.2020.125890 ↗
26. Kuo, C.-C., Lin, C.-H., Lin, Y.-T. & Chang, J.-T. Effects of Cathode Voltage Pulse Width in High Power Impulse Magnetron Sputtering on the Deposited Chromium Thin Films. Coatings 10, 542 (2020).10.3390/coatings10060542 ↗
27. Han, Z. et al. Tailored high-temperature corrosion behavior of Cr coatings using high power impulse magnetron sputtering on ZIRLO alloys for accident-tolerant fuel application. Surf. Coat. Technol. 488, 130941 (2024).10.1016/j.surfcoat.2024.130941 ↗
28. Wang, D. et al. Sand erosion and crack propagation mechanism of Cr/CrN/Cr/CrAlN multilayer coating. Ceram. Int. 48, 24638–24648 (2022).10.1016/j.ceramint.2022.05.109 ↗
29. Ibrahim, K. et al. Annealing effects on microstructural, optical, and mechanical properties of sputtered CrN thin film coatings: Experimental studies and finite element modeling. J. Alloy. Compd. 750, 451–464 (2018).10.1016/j.jallcom.2018.04.012 ↗
30. Mydłowska, K., Myśliński, P., Szparaga, Ł, Gilewicz, A. & Jerzy, R. Analysis of the effect of antiwear CrN coating thickness on the evolution of thermomechanical interactions in the substrate/PVD coating system. J. Therm. Anal. Calorim. 125, 1241–1247 (2016).10.1007/s10973-016-5588-2 ↗
31. Zeilinger, A. et al. Resolving depth evolution of microstructure and hardness in sputtered CrN film. Thin Solid Films 581, 75–79 (2015).10.1016/j.tsf.2014.10.106 ↗
32. Zhang, F., Yan, M., He, J. & Yin, F. Microstructures and nano-mechanical properties of multilayer coatings prepared by plasma nitriding Cr-coated Al alloy. Vacuum 142, 106–113 (2017).10.1016/j.vacuum.2017.05.013 ↗
33. Conrad, H. Effect of interstitial solutes on the strength and ductility of titanium. Prog. Mater. Sci. 26, 123–403 (1981).10.1016/0079-6425(81)90001-3 ↗
34. Tyson, W. R. Strengthening of hcp Zr, Ti and Hf by interstitial solutes – a review. Can. Metall. Q. 6, 301–332 (1967).10.1179/cmq.1967.6.4.301 ↗
35. Mouawad, B., Boulnat, X., Fabrègue, D., Perez, M. & de Carlan, Y. Tailoring the microstructure and the mechanical properties of ultrafine grained high strength ferritic steels by powder metallurgy. J. Nucl. Mater. 465, 54–62 (2015).10.1016/j.jnucmat.2015.05.053 ↗
36. Firstov, S. O., Rohul’, T. H., Svechnikov, V. L. & Dub, S. M. Concept of “useful” impurities and mechanical properties of nanostructurized chromium and molybdenum films. Mater. Sci. 42, 121–126 (2006).10.1007/s11003-006-0064-y ↗
37. Lei, Z. et al. Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes. Nature 563, 546–550 (2018).10.1038/s41586-018-0685-y ↗
38. Erdemir, A. A crystal chemical approach to the formulation of self-lubricating nanocomposite coatings. Surf. Coat. Technol. 200, 1792–1796 (2005).10.1016/j.surfcoat.2005.08.054 ↗
39. Xu, J., Cheng, J., Jiang, S., Munroe, P. & Xie, Z.-H. The influence of Ti additions on the mechanical and electrochemical behavior of β-Ta5Si3 nanocrystalline coating. Appl. Surf. Sci. 419, 901–915 (2017).10.1016/j.apsusc.2017.05.130 ↗
40. Yuan, L. & Wang, H. M. Corrosion behaviors of a γ-toughened Cr13Ni5Si2/Cr3Ni5Si2 multi-phase ternary metal silicide alloy in NaCl solution. Electrochim. Acta 54, 421–429 (2008).10.1016/j.electacta.2008.07.056 ↗
41. Zheng, X., Castaneda, H., Gao, H. & Srivastava, A. Synergistic effects of corrosion and slow strain rate loading on the mechanical and electrochemical response of an aluminium alloy. Corros. Sci. 153, 53–61 (2019).10.1016/j.corsci.2019.03.018 ↗
42. Li, X. et al. Improvement of corrosion resistance of H59 brass through fabricating superhydrophobic surface using laser ablation and heating treatment. Corros. Sci. 180, 109186 (2021).10.1016/j.corsci.2020.109186 ↗
43. Chidambaram, D., Clayton, C. R. & Dorfman, M. R. Evaluation of the electrochemical behavior of HVOF-sprayed alloy coatings. Surf. Coat. Technol. 176, 307–317 (2004).10.1016/S0257-8972(03)00809-0 ↗
44. dos Santos, A. M. M. et al. Corrosion and cell viability studies of graphite-like hydrogenated amorphous carbon films deposited on bare and nitrided titanium alloy. Corros. Sci. 82, 297–303 (2014).10.1016/j.corsci.2014.01.025 ↗
45. Liu, Y. et al. Controllable defect engineering to enhance the corrosion resistance of Cr/GLC multilayered coating for deep-sea applications. Corros. Sci. 199, 110175 (2022).10.1016/j.corsci.2022.110175 ↗
46. Matthes, B. et al. Corrosion performance of some titanium-based hard coatings. Surf. Coat. Technol. 49, 489–495 (1991).10.1016/0257-8972(91)90105-6 ↗
47. Tsuchiya, H., Fujimoto, S., Chihara, O. & Shibata, T. Semiconductive behavior of passive films formed on pure Cr and Fe–Cr alloys in sulfuric acid solution. Electrochim. Acta 47, 4357–4366 (2002).10.1016/S0013-4686(02)00508-X ↗
48. Cardoso, M. V., Amaral, S. T. & Martini, E. M. A. Temperature effect in the corrosion resistance of Ni–Fe–Cr alloy in chloride medium. Corros. Sci. 50, 2429–2436 (2008).10.1016/j.corsci.2008.06.030 ↗
49. Wang, Z. et al. Recent research progress on the passivation and selective oxidation for the 3d-transition-metal and refractory multi-principal element alloys. NPJ Mater. Degrad. 7, 86 (2023).10.1038/s41529-023-00410-0 ↗
50. Rigter, S. A. et al. Passivation Properties and Formation Mechanism of Amorphous Halide Perovskite Thin Films. Adv. Funct. Mater. 31, 2010330 (2021).10.1002/adfm.202010330 ↗
51. Zheng, Z. B., Zheng, Y. G., Sun, W. H. & Wang, J. Q. Effect of applied potential on passivation and erosion–corrosion of a Fe-based amorphous metallic coating under slurry impingement. Corros. Sci. 82, 115–124 (2014).10.1016/j.corsci.2014.01.004 ↗
52. Zhang, Z.-C., Lan, A.-D., Zhang, M. & Qiao, J.-W. Effect of Ce on the pitting corrosion resistance of non-equiatomic high-entropy alloy Fe40Mn20Cr20Ni20 in 3.5 wt% NaCl solution. J. Alloy. Compd. 909, 164641 (2022).10.1016/j.jallcom.2022.164641 ↗