journal article·2019-01-07Open access

Cathodic driven coating delamination suppressed by inhibition of cation migration along Zn|polymer interface in atmospheric CO2

Viacheslav Shkirskiy, Matthias Uebel, Alina Maltseva, Grégory Lefèvre, Polina Volovitch, Michael Rohwerder

npj Materials Degradation· Volume 3· Issue 1

Abstract

Abstract The degradation of the Zn|polymer interface is inhibited by CO2 gas in a humid environment. The inhibition mechanism varies greatly for different polymer matrices and depends on the affinity of the polymer to CO2. Coatings based on polymers with high affinity to CO2 such as polyacrylamide show high delamination rates due to the fast uptake of water. In this case, the cation transport that causes the initial pull down of potential for initiating the oxygen reduction reaction occurs via the polymer. Here CO2 decreases water uptake due to competitive absorption into the polymer matrix, inhibiting the delamination rate. CO2 can quickly reach the interface of polymers with functional groups with a low affinity to water and CO2, such as polyvinyl butyral and polyvinyl alcohol. In this case, the inhibition of the delamination rate is achieved by a strong decrease in cation migration rate at the Zn|polymer interface accompanied by the formation of mixed hydrozincite/absorbed CO2 layers on the ZnO surface underneath the polymers. Further experiments showed that the presence of CO2 accelerates anion migration, suggesting an influence of CO2 on the surface charge at the Zn|coating interface, thus affecting ion migration. Inhibition of cation migration has never been reported before and should be taken into account into the mechanism of cathodic-driven delamination on Zn under atmospheric conditions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Membrane Separation and Gas Transport · Advanced Sensor and Energy Harvesting Materials · High voltage insulation and dielectric phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Schaller, R. F., Jove-Colon, C. F., Taylor, J. M. & Schindelholz, E. J. The controlling role of sodium and carbonate on the atmospheric corrosion rate of aluminum. Npj Mater. Degrad. 20, 1–8 (2017).
2. Cole, I. Recent progress and required developments in atmospheric corrosion of galvanised steel and zinc. Materials 10, 1288–1300 (2017).10.3390/ma10111288 ↗
3. LeBozec, N. et al. Effect of carbon dioxide on the atmospheric corrosion of Zn-Mg-Al coated steel. Corros. Sci. 74, 379–386 (2013).10.1016/j.corsci.2013.05.011 ↗
4. Fürbeth, W. & Stratmann, M. The delamination of polymeric coatings from electrogalvanised steel—a mechanistic approach. Part 3: delamination kinetics and influence of CO2. Corros. Sci. 43, 207–227 (2001).10.1016/S0010-938X(00)00047-0 ↗
5. Kim, S. & Lee, Y. M. High performance polymer membranes for CO2 separation. Curr. Opin. Chem. Eng. 2, 238–244 (2013).10.1016/j.coche.2013.03.006 ↗
6. Brunetti, A., Scura, F., Barbieri, G. & Drioli, E. Membrane technologies for CO2 separation. J. Membr. Sci. 359, 115–125 (2010).10.1016/j.memsci.2009.11.040 ↗
7. Bernardo, P., Drioli, E. & Golemme, G. Membrane gas separation: a review/state of the art. Ind. Eng. Chem. Res. 48, 4638–4663 (2009).10.1021/ie8019032 ↗
8. Tanaka, K., Okamoto, K. I. Structure and transport properties of polyimides as materials for gas and vapor membrane separation. Mater. Sci. Membr. Gas Vap. Sep. 271–291 (2006).10.1002/047002903X.ch10 ↗
9. Mason, C. R. et al. Enhancement of CO2 affinity in a polymer of intrinsic microporosity by amine modification. Macromolecules 47, 1021–1029 (2014).10.1021/ma401869p ↗
10. Du, N. et al. Polymer nanosieve membranes for CO2-capture applications. Nat. Mater. 10, 372–375 (2011).10.1038/nmat2989 ↗
11. Mason, C. R. et al. Polymer of intrinsic microporosity incorporating thioamide functionality: preparation and gas transport properties. Macromolecules 44, 6471–6479 (2011).10.1021/ma200918h ↗
12. Falk, T., Svensson, J.-E. & Johansson, L.-G. The Influence of CO2 and NaCI on the atmospheric corrosion of zinc. J. Electrochem. Soc. 145, 2993–2999 (1998).10.1149/1.1838753 ↗
13. Lindström, R., Svensson, J.-E. & Johansson, L.-G. The atmospheric corrosion of zinc in the presence of NaCl—the influence of carbon dioxide and temperature. J. Electrochem. Soc. 147, 1751–1757 (2000).10.1149/1.1393429 ↗
14. Falk, T., Svensson, J.-E. & Johansson, L.-G. The role of carbon dioxide in the atmospheric corrosion of zinc. J. Electrochem. Soc. 145, 39–44 (1998).10.1149/1.1838207 ↗
15. Laska, Ca et al. Effect of hydrogen carbonate and chloride on zinc corrosion investigated by a scanning flow cell system. Electrochim. Acta 159, 198–209 (2015).10.1016/j.electacta.2015.01.217 ↗
16. Yoo, J. D., Ogle, K. & Volovitch, P. The effect of synthetic zinc corrosion products on corrosion of electrogalvanized steel. II. Zinc reactivity and galvanic coupling zinc/steel in presence of zinc corrosion products. Corros. Sci. 83, 32–37 (2014).10.1016/j.corsci.2013.12.024 ↗
17. Yoo, J. D., Volovitch, P., Abdel Aal, A., Allely, C. & Ogle, K. The effect of an artificially synthesized simonkolleite layer on the corrosion of electrogalvanized steel. Corros. Sci. 70, 1–10 (2013).10.1016/j.corsci.2012.10.024 ↗
18. Yoo, J. D., Ogle, K. & Volovitch, P. The effect of synthetic zinc corrosion products on corrosion of electrogalvanized steel. II. Zinc reactivity and galvanic coupling zinc/steel in presence of zinc corrosion products. Corros. Sci 83, 32–37 (2014).10.1016/j.corsci.2013.12.024 ↗
19. Salgin, B., Hamou, R. F. & Rohwerder, M. Monitoring surface ion mobility on aluminum oxide: effect of chemical pretreatments. Electrochim. Acta 110, 526–533 (2013).10.1016/j.electacta.2013.03.060 ↗
20. Vimalanandan, A. et al. Redox-responsive self-healing for corrosion protection. Adv. Mater. 25, 6980–6984 (2013).10.1002/adma.201302989 ↗
21. Williams, G. & McMurray, H. N. Anion-exchange inhibition of filiform corrosion on organic coated AA2024-T3 aluminum alloy by hydrotalcite-like pigments. Electrochem. Solid-State Lett. 6, B9–B11 (2003).10.1149/1.1539771 ↗
22. Fürbeth, W. & Stratmann, M. The delamination of polymeric coatings from electrogalvanised steel-a mechanistic approach.-Part 1: delamination from a defect with intact zinc layer. Corros. Sci. 43, 207–227 (2001).10.1016/S0010-938X(00)00047-0 ↗
23. Nazarov, A., Prosek, T. & Thierry, D. Application of EIS and SKP methods for the study of the zinc/polymer interface. Electrochim. Acta 53, 7531–7538 (2008).10.1016/j.electacta.2007.11.053 ↗
24. Tran, T. H. et al. Regenerative nano-hybrid coating tailored for autonomous corrosion protection. Adv. Mater. 27, 3825–3830 (2015).10.1002/adma.201501044 ↗
25. Nazarov, A., Diler, E., Persson, D. & Thierry, D. Electrochemical and corrosion properties of ZnO/Zn electrode in atmospheric environments. J. Electroanal. Chem. 737, 129–140 (2015).10.1016/j.jelechem.2014.07.029 ↗
26. Leng, A., Streckel, H. & Stratmann, M. The delamination of polymeric coatings from steel. Part 2: first stage of delamination, effect of type and concentration of cations on delamination, chemical analysis of the interface. Corros. Sci. 41, 579–597 (1999).10.1016/S0010-938X(98)00167-X ↗
27. Liu, H., Bu, Y., Sanjayan, J. G., Nazari, A. & Shen, Z. Suitability of polyacrylamide superabsorbent polymers as the internal curing agent of well cement. Constr. Build. Mater. 112, 253–260 (2016).10.1016/j.conbuildmat.2016.02.217 ↗
28. Rohwerder, M. in Reference Module in Chemistry, Molecular Sciences and Chemical Engineering 414–422 (Elsevier, Amsterdam, 2018).
29. Fuente, D. De. La, Flores, S. & Morcillo, M. Deterioration of paint systems applied on zinc substrates contaminated with soluble salts. Prog. Org. Coat. 41, 183–190 (2001).10.1016/S0300-9440(01)00145-X ↗
30. Bouchard, M. & Smith, D. C. Catalogue of 45 reference Raman spectra of minerals concerning research in art history or archaeology, especially on corroded metals and coloured glass. Spectrochim. Acta 59, 2247–2266 (2003).10.1016/S1386-1425(03)00069-6 ↗
31. Azmat, N. S., Ralston, K. D., Muddle, B. C. & Cole, I. S. Corrosion of Zn under acidified marine droplets. Corros. Sci. 53, 1604–1615 (2011).10.1016/j.corsci.2011.01.044 ↗
32. Lefèvre, G. In situ Fourier-transform infrared spectroscopy studies of inorganic ions adsorption on metal oxides and hydroxides. Adv. Colloid Interface Sci. 107, 109–123 (2004).10.1016/j.cis.2003.11.002 ↗
33. Turianicová, E.et al. Obut, CO2 utilization for fast preparation of nanocrystalline hydrozincite. J. CO2 Util. 16, 328–335 (2016).10.1016/j.jcou.2016.08.007 ↗
34. Wijnja, H. & Schulthess, C. P. ATR–FTIR and DRIFT spectroscopy of carbonate species at the aged γ-Al2O3/water interface. Spectrochim. Acta Part A 55, 861–872 (1999).10.1016/S1386-1425(98)00236-4 ↗
35. Bitenc, M., Marinsek, M. & Crnjak Orel, Z. Preparation and characterization of zinc hydroxide carbonate and porous zinc oxide particles. J. Eur. Ceram. Soc. 28, 2915–2921 (2008).10.1016/j.jeurceramsoc.2008.05.003 ↗
36. Yoo, J. D., Ogle, K. & Volovitch, P. The effect of synthetic zinc corrosion products on corrosion of electrogalvanized steel: I. Cathodic reactivity under zinc corrosion products. Corros. Sci. 81, 11–20 (2014).10.1016/j.corsci.2013.11.045 ↗
37. Hausbrand, R., Stratmann, M. & Rohwerder, M. The physical meaning of electrode potentials at metal surfaces and polymer/metal interfaces: consequences for delamination. J. Electrochem. Soc. 155, C369–C379 (2008).10.1149/1.2926589 ↗
38. Muster, T. H. & Cole, I. S. The protective nature of passivation films on zinc: surface charge. Corros. Sci. 46, 2319–2335 (2004).10.1016/j.corsci.2004.01.002 ↗
39. Muster, T. H., Aaron, N. K. & Cole, I. S. The protective nature of passivation films on zinc: wetting and surface charge. Corros. Sci. 46, 2337–2354 (2004).10.1016/j.corsci.2004.01.001 ↗
40. Frankel, G. S. et al. Potential control under thin aqueous layers using a Kelvin probe. Corros. Sci. 49, 2021–2036 (2007).10.1016/j.corsci.2006.10.017 ↗
41. Uebel, M. et al. Fabrication of robust reference tips and reference electrodes for Kelvin probe applications in changing atmospheres. Langmuir 33, 10807–10817 (2017).10.1021/acs.langmuir.7b02533 ↗
42. Leng, A., Streckel, H. & Stratmann, M. The delamination of polymeric coatings from steel. Part 1: calibration of the Kelvin probe and basic delamination mechanism. Corros. Sci. 41, 547–579 (1999).10.1016/S0010-938X(98)00166-8 ↗
43. Han, S.-J., Yoo, M., Kim, D.-W. & Wee, J.-H. Carbon dioxide capture using calcium hydroxide aqueous solution as the absorbent. Energy Fuels. 25, 3825–3834 (2011).10.1021/ef200415p ↗
44. Rohwerder, M., Isik-Uppenkamp, S. & Stratmann, M. Application of SKP for in situ monitoring of ion mobility along insulator/insulator interfaces. Electrochim. Acta 54, 6058–6062 (2009).10.1016/j.electacta.2009.03.012 ↗
45. Posner, R., Wapner, K., Stratmann, M. & Grundmeier, G. Transport processes of hydrated ions at polymer/oxide/metal interfaces. Part 1. Transport at interfaces of polymer coated oxide covered iron and zinc substrates. Electrochim. Acta 54, 891–899 (2009).10.1016/j.electacta.2008.06.074 ↗
46. Posner, R. Ozcan, O. & Grundmeier, G. in Design of Adhesive Joints Under Humid Conditions (eds da Silva, L. F. M. & Sato, C.) (Spriger, Berlin Heidelberg, 2013).
47. Davantes, A. & Lefevre, G. In situ real time infrared spectroscopy of sorption of (poly)molybdate ions into layered double hydroxides. J. Phys. Chem. 117, 12922–12929 (2013).10.1021/jp408885k ↗