journal article·2025-07-25Open access

Intermetallic particles trigger streaking corrosion in AA7075-T6

Marlon Mopon, Arjan Mol, Santiago J. Garcia

npj Materials Degradation· Volume 9· Issue 1

Abstract

Streaking corrosion (SC) of AA7075-T6, characterized by the rapid dissolution of an altered surface layer (ASL) formed through mechanical surface treatments, is investigated. Utilizing in situ high-resolution reflected light microscopy, we reveal that SC initiates preferentially on intermetallic particles (IMP) or pre-existing pits. Optical evidence of galvanic interactions between propagating streaks and connected IMPs is observed. Concurrent in situ open circuit potential (OCP) measurements show a characteristic pattern that correlate with SC initiation, progression, and termination. This work demonstrates the effectiveness of a simple in situ optical-electrochemical setup in tracking dynamic local corrosion processes and directly linking OCP transients to specific corrosion events.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Kosari, A. et al. Dealloying-driven local corrosion by intermetallic constituent particles and dispersoids in aerospace aluminium alloys. Corros. Sci. 177, 108947 (2020).10.1016/j.corsci.2020.108947 ↗
2. Kumar, A., Chaudhari, G. P. & Nath, S. K. Correlation of microstructure with corrosion performance in high zinc 7068 aluminum alloy aged using different T6 conditions. Mater. Charact. 191, 112133 (2022).10.1016/j.matchar.2022.112133 ↗
3. Ayer, R., Koo, J. Y., Steeds, J. W. & Park, B. K. Microanalytical study of the heterogeneous phases in commercial Al-Zn-Mg-Cu alloys. Metall. Trans. A 16, 1925–1936 (1985).10.1007/BF02662393 ↗
4. Zhu, Y., Sun, K. & Frankel, G. S. Intermetallic phases in aluminum alloys and their roles in localized corrosion. J. Electrochem Soc. 165, C807–C820 (2018).10.1149/2.0931811jes ↗
5. Kosari, A. et al. In-situ nanoscopic observations of dealloying-driven local corrosion from surface initiation to in-depth propagation. Corros. Sci. 177, 108912 (2020).10.1016/j.corsci.2020.108912 ↗
6. Hashimoto, T. et al. Investigation of dealloying of S phase (Al2CuMg) in AA 2024-T3 aluminium alloy using high resolution 2D and 3D electron imaging. Corros. Sci. 103, 157–164 (2016).10.1016/j.corsci.2015.11.013 ↗
7. Mallinson, C. F. et al. The localised corrosion associated with individual second phase particles in AA7075-T6: A study by SEM, EDX, AES, SKPFM and FIB-SEM. Mater. Corros. 68, 748–763 (2017).10.1002/maco.201609312 ↗
8. Andreatta, F., Terryn, H. & de Wit, J. H. W. Effect of solution heat treatment on galvanic coupling between intermetallics and matrix in AA7075-T6. Corros. Sci. 45, 1733–1746 (2003).10.1016/S0010-938X(03)00004-0 ↗
9. Liu, L. L., Pan, Q. L., Wang, X. D. & Xiong, S. W. The effects of aging treatments on mechanical property and corrosion behavior of spray formed 7055 aluminium alloy. J. Alloy. Compd. 735, 261–276 (2018).10.1016/j.jallcom.2017.11.070 ↗
10. Huo, W. et al. Simultaneously enhanced mechanical strength and inter-granular corrosion resistance in high strength 7075 Al alloy. J. Alloy. Compd. 781, 680–688 (2019).10.1016/j.jallcom.2018.12.024 ↗
11. Wang, S. S., Jiang, J. T., Fan, G. H., Frankel, G. S. & Zhen, L. Effects of long-term natural aging on the altered surface layer on an Al-Zn-Mg-Cu alloy and on corrosion properties. Electrochim. Acta 266, 34–42 (2018).10.1016/j.electacta.2018.02.001 ↗
12. Huang, R. S., Lin, C. J. & Isaacs, H. S. A difference-imaging technique used to study streaking corrosion of aluminum alloys AA7075 and AA8006 in chloride solution. Electrochem. Solid-State Lett. 9, B11 (2006).10.1149/1.2140503 ↗
13. Liu, Y. et al. Corrosion behaviour of mechanically polished AA7075-T6 aluminium alloy. Surf. Interface Anal. 42, 185–188 (2010).10.1002/sia.3136 ↗
14. Seong, J., Yang, F., Scheltens, F., Frankel, G. S. & Sridhar, N. Influence of the Altered Surface Layer on the Corrosion of AA5083. J. Electrochem Soc. 162, C209–C218 (2015).10.1149/2.0321506jes ↗
15. Liu, Y. et al. Influence of near-surface deformed layers on filiform corrosion of AA3104 aluminium alloy. Surf. Interface Anal. 45, 1553–1557 (2013).10.1002/sia.5232 ↗
16. Afseth, A., Nordlien, J. H., Scamans, G. M. & Nisancioglu, K. Influence of heat treatment and surface conditioning on filiform corrosion of aluminium alloys AA3005 and AA5754. Corros. Sci. 43, 2359–2377 (2001).10.1016/S0010-938X(01)00019-1 ↗
17. Afseth, A., Nordlien, J. H., Scamans, G. M. & Nisancioglu, K. Effect of thermo-mechanical processing on filiform corrosion of aluminium alloy AA3005. Corros. Sci. 44, 2491–2506 (2002).10.1016/S0010-938X(02)00036-7 ↗
18. Ambat, R., Davenport, A. J., Afseth, A. & Scamans, G. Electrochemical behavior of the active surface layer on rolled aluminum alloy sheet. J. Electrochem Soc. 151, B53 (2004).10.1149/1.1635828 ↗
19. Liu, B., Zhang, X., Zhou, X., Hashimoto, T. & Wang, J. The corrosion behaviour of machined AA7150-T651 aluminium alloy. Corros. Sci. 126, 265–271 (2017).10.1016/j.corsci.2017.07.008 ↗
20. Zhao, Z. & Frankel, G. S. On the first breakdown in AA7075-T6. Corros. Sci. 49, 3064–3088 (2007).10.1016/j.corsci.2007.02.001 ↗
21. Huang, R. S., Lin, C. J. & Isaacs, H. S. Measuring streaking rates of an Al–Zn alloy using a difference imaging technique. Corros. Sci. 48, 1867–1873 (2006).10.1016/j.corsci.2006.05.039 ↗
22. Wang, S.-S. et al. Mechanism of Localized Breakdown of 7000 Series Aluminum Alloys. J. Electrochem Soc. 160, C493–C502 (2013).10.1149/2.080310jes ↗
23. Olgiati, M., Denissen, P. J. & Garcia, S. J. When all intermetallics dealloy in AA2024-T3: quantifying early stage intermetallic corrosion kinetics under immersion. Corros Sci https://doi.org/10.1016/j.corsci.2021.109836 (2021).10.1016/j.corsci.2021.109836 ↗
24. Mopon, M., Mol, A. & Garcia, S. J. Effect of delayed inhibitor supply on AA2024-T3 intermetallic activity: A local in situ analysis with reflected microscopy. Corros. Sci. 230, 111910 (2024).10.1016/j.corsci.2024.111910 ↗
25. Zhao, Z. & Frankel, G. S. Surface layer dissolution kinetics of aluminum alloy 7075 in various tempers. Corrosion 63, 613–624 (2007).10.5006/1.3278411 ↗
26. Homborg, A. M., Olgiati, M., Denissen, P. J. & Garcia, S. J. An integral non-intrusive electrochemical and in-situ optical technique for the study of the effectiveness of corrosion inhibition. Electrochim. Acta 403, 139619 (2022).10.1016/j.electacta.2021.139619 ↗
27. Isaacs, H. S., Scheffey, C. & Huang, R. The location of events producing potential transients during pitting of freely corroding Al and its alloys. ECS Trans. 11, 1–12 (2008).10.1149/1.2925257 ↗
28. Xiao, J. & Chaudhuri, S. Predictive modeling of localized corrosion: An application to aluminum alloys. Electrochim. Acta 56, 5630–5641 (2011).10.1016/j.electacta.2011.04.019 ↗
29. Li, Y., Tang, Y., Liu, X. & Li, Y. Insight into the crevice corrosion mechanism of AA7075-T651 high-strength aluminum alloys in neutral nitrate solution: The effect of Cl−. Mater. Corros. 75, 1373–1388 (2024).10.1002/maco.202414334 ↗
30. Liu, B., Zhou, X. & Zhang, X. Filiform corrosion behaviour on machined AA7150 aluminium alloy. Trans. Nonferrous Met. Soc. China 30, 2056–2066 (2020).10.1016/S1003-6326(20)65360-2 ↗
31. Korjenic, A., Romanovskaia, E. & Scully, J. R. Spatially resolved assessment and analysis of Al-Zn, Mg, and Mg/Al-Zn metal-rich primers applied to AA 7075-T651 in full immersion. J. Electrochem Soc. 171, 091505 (2024).10.1149/1945-7111/ad7535 ↗
32. Vu Dinh, T. et al. On the miniaturised sacrificial protection achieved by surface precipitation in aluminium alloys. Corros. Sci. 145, 67–79 (2018).10.1016/j.corsci.2018.09.011 ↗