journal article·2020-08

Numerical modelling and optimization of CdS/CdTe solar cell with incorporation of Cu2O HT-EBL layer

Imad Eddine Tinedert, Achour Saadoune, Idris Bouchama, Mohammad Alam Saeed

Optical Materials· Volume 106
Publisher page

Abstract

Abstract In the recent years, use of CdTe thin-film as an absorber in solar cells has been augmented significantly due to high device efficiency, stability in the performance and cost effectiveness. In this work, CdTe solar cell has been investigated employing 2-dimensional numerical simulations using TCAD Silvaco-Atlas simulator. Initially, a reference structure of FTO/i-SnO2/CdS/CdTe solar cell was simulated based on experimental data for the validity of the simulation and the extent to which present results agree to the experimental data. To reduce the minority carrier recombination loss, a new structure is proposed by incorporation of the cuprous oxide (p-type Cu2O) layer at back-contact as a hole transport-electron blocking layer (HT-EBL). High performancehas been obtained by optimizing the cell parameters in terms of thickness, doping concentration and carrier lifetime. The efficiency of the structure is increased by 10.35% compared to the recent experimental results. Furthermore, the proposed structure consists of FTO/i-SnO2/CdS/CdTe/Cu2O presents the best conversion efficiency of 24.35%, short-circuit current density of 27.59 mA/cm2, open-circuit voltage of 1.03 V and fill-factor of 85.83%, under the air mass 1.5 global spectrum (AM1.5G).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Solar cell efficiency tables (Version 53)10.1002/pip.3102 ↗
2. High-efficiency polycrystalline CdTe thin-film solar cells10.1016/j.solener.2004.06.006 ↗
3. Polycrystalline CdTe thin films for photovoltaic applications10.1016/j.pcrysgrow.2006.09.001 ↗
4. Thin-film CdS/CdTe solar cell with 15.8% efficiency10.1063/1.109629 ↗
5. A pyrosol process to deposit large-area SnO2:F thin films and its use as a transparent conducting substrate for CdTe solar cells10.1016/S0927-0248(00)00279-8 ↗
6. Non-uniformity mitigation in CdTe solar cells: the effects of high-resistance transparent conducting oxide buffer layers
7. H. Mahabaduge, K. Wieland, C. Carter, V. Plotnikov and D. Giolando, Sputtered HRT layers for CdTe solar cells, 37th IEEE Photovoltaic Specialists Conference, pp.1302-1304.
8. A new high-efficiency GaAs solar cell structure using a heterostructure back-surface field
9. Back-surface field design for n+p GaAs cells10.1016/0379-6787(87)90030-5 ↗
10. Projections of GaAs solar-cell performance limits based on two-dimensional numerical simulation10.1109/16.299671 ↗
11. The influence of rf-power and oxygen flow rate during deposition on the optical transmittance of copper oxide thin films prepared by reactive magnetron sputtering10.1088/0022-3727/38/2/011 ↗
12. Optical and structural properties of nanocrystalline copper oxide thin films prepared by activated reactive evaporation10.1016/S0040-6090(01)01216-0 ↗
13. Transmittance enhancement and optical band gap widening of Cu2O thin films after air annealing10.1063/1.4865957 ↗
14. Copper (I) Oxide (Cu2O) based back contact for p-i-n CdTe solar cells10.1002/pip.2782 ↗
15. 2016
16. Incorporation of CdSe layers into CdTe thin film solar cells10.1016/j.solmat.2018.03.010 ↗
17. Simulation of high efficiency CIGS solar cells with SCAPS-1D software10.1016/j.egypro.2015.07.809 ↗
18. Role of facile synthesized V2O5 as hole transport layer for CdS/CdTe heterojunction solar cell: validation of simulation using experimental data10.1016/j.spmi.2019.106168 ↗
19. The roles of carrier concentration and interface, bulk, and grain-boundary recombination for 25% efficient CdTe solar cells10.1063/1.4984320 ↗
20. Simulation of performance of cadmium telluride solar cell using AMPS-1D program10.11648/j.jmpt.20160202.11 ↗
21. Numerical modeling of CdS/CdTe and CdS/CdTe/ZnTe solar cells as a function of CdTe thickness10.1016/j.solmat.2007.04.006 ↗
22. A study of CdTe solar cells using Ga-doped MgxZn1-xO buffer/TCO layers: simulation and performance analysis
23. Recent progress in thin-film cadmium telluride solar cells10.1002/pip.4670010105 ↗
24. Influence of the layer parameters on the performance of the CdTe solar cells10.1007/s11801-018-7229-4 ↗
25. Mirkamali · 2016
26. Optimization of CdS buffer layer on the performance of copper indium gallium selenide solar cells
27. Effect of TCO, BSF and back contact barrier on CdS/CdTe solar cell: modeling and simulation
28. Hima · 2013
29. Le rôle de la couche fenêtre dans les performances d’une cellule solaire GaAs
30. Te layer to reduce the CDTE back-contact barrier10.1109/JPHOTOV.2017.2768965 ↗
31. Design of a high efficiency ultrathin CdS/CdTe solar cell using back surface field and backside distributed Bragg reflector10.1364/OE.22.00A921 ↗
32. Optical design and fabrication of fully sputtered CdTe/CdS solar cells10.1088/1742-6596/286/1/012038 ↗
33. Electrically tunable plasmonic behavior of nanocube–polymer nanomaterials induced by a redox-active electrochromic polymer10.1021/nn501601e ↗
34. Absorption coefficient of bulk and thin film Cu2O10.1016/j.solmat.2011.05.047 ↗
35. High-efficiency, flexible CdTe solar cells on ultra-thin glass substrates10.1063/1.4916634 ↗
36. Numerical analysis of CdTe thin film solar cells with CdS:O window layer and ZnO buffer layer
37. Design of a high efficiency ultrathin CdS/CdTe solar cell using back surface field and backside distributed Bragg reflector10.1364/OE.22.00A921 ↗
38. Effect of Cu2O hole transport layer and improved minority carrier life time on the efficiency enhancement of Cu2NiSnS4 based experimental solar cell10.1063/1.5037471 ↗