journal article·2020-12

Numerical simulation of an innovative high efficiency solar cell with CdTe/Si composite absorption layer

Biao Zhou, Xiaohan Yin, Junlin Zhang, Guanggen Zeng, Bing Li, Jingquan Zhang, Lianghuan Feng

Optical Materials· Volume 110
Publisher page

Abstract

Abstract As the improvement in efficiency of CdTe solar cell becomes more and more difficult, it is very necessary to engage in research on CdTe solar cell with innovative structure or new materials. In this work, we first proposed a design idea of constructing cadmium telluride on silicon to form a CdTe/Si composite absorption layer and then achieving an innovative high efficiency solar cell with a basic structure of n-Zn1-xMgxO/p-CdTe/p-Si/Au. This kind of solar cell has the advantages of relatively high open-circuit voltage and large short-circuit current, because photons with a wavelength range of 825 nm–1100 nm can not be absorbed by CdTe with a bandgap of 1.5 eV while they can be absorbed by silicon with a bandgap of 1.12 eV, thereby extending the long-wave response of sunlight. Numerical simulation of solar cell was carried out by using SCAPS-1D software to study the impacts of materials parameters such as thickness, doping concentration, valence band offset (VBO) and interface state density of CdTe/Si on device performances. Results indicated that thinner CdTe and suitable thick Si were beneficial for the cell with high efficiency. Particularly, the interface states between CdTe and Si severely degraded cell performance, so an innovative CdSixTey layer was proposed for the first time to effectively reduce the lattice mismatch and modify the interface properties between CdTe and Si. Finally, the highest theoretical conversion efficiency of 28.36% accompanied by open-circuit voltage of 0.838 V, short-circuit current of 39.28 mA/cm2, and fill factor of 86.11% of solar cell with SnO2:F/Zn1-xMgxO/CdTe/CdSixTey/Si/ZnTe:Mo/Au structure was obtained by optimizing numerical simulation design.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Recent progress in thin-film cadmium telluride solar cells10.1002/pip.4670010105 ↗
2. Q4 2017/Q1 2018 solar industry update
3. Polycrystalline CdTe photovoltaics with efficiency over 18% through improved absorber passivation and current collection10.1016/j.solmat.2017.11.031 ↗
4. Sputter-deposited oxides for interface passivation of CdTe photovoltaics10.1109/JPHOTOV.2017.2787021 ↗
5. Tailoring MgZnO/CdSeTe interfaces for photovoltaics10.1109/JPHOTOV.2018.2877982 ↗
6. Structural and compositional dependence of the CdTexSe1 - x alloy layer photoactivity in CdTe-based solar cells (vol 7, pg 12537, 2016)
7. Polycrystalline CdSeTe/CdTe absorber cells with 28 mA/cm(2) short-circuit current10.1109/JPHOTOV.2017.2775139 ↗
8. Krum · 2016
9. Exceeding 20% efficiency with in situ group V doping in polycrystalline CdTe solar cells10.1038/s41560-019-0446-7 ↗
10. Loss analysis of monocrystalline CdTe solar cells with 20% active-area efficiency10.1109/JPHOTOV.2017.2685438 ↗
11. Selecting tandem partners for silicon solar cells
12. Pv · 2018
13. Jain · 2017 · 236
14. Strategies for high performance perovskite/c-Si tandem solar cells: effects of bandgap engineering, solar concentration and device temperature10.1016/j.optmat.2020.109935 ↗
15. Opportunities and challenges for tandem solar cells using metal halide perovskite semiconductors10.1038/s41560-018-0190-4 ↗
16. Two-terminal perovskites tandem solar cells: recent advances and perspectives10.1002/solr.201900080 ↗
17. Incorporation of CdSe layers into CdTe thin film solar cells10.1016/j.solmat.2018.03.010 ↗
18. Solar cell efficiency tables (Version 55)10.1002/pip.3228 ↗
19. Fang · 2019 · 61
20. Low-cost CdTe/silicon tandem solar cells10.1109/JPHOTOV.2017.2737361 ↗
21. Design prospects of cadmium telluride/silicon (CdTe/Si) tandem solar cells from numerical simulation10.1016/j.ijleo.2017.03.106 ↗
22. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
23. Burgelman · 2016
24. Optimization of the CIGS based thin film solar cells: numerical simulation and analysis10.1016/j.ijleo.2013.06.034 ↗
25. M. Mostefaoui, H. Mazari, S. Khelifi, A. Bouraiou, R. Dabou, Simulation of High Efficiency CIGS solar cells with SCAPS-1D software, in: C. Salame, M. Aillerie, P. Papageorgas (Eds.), International Conference on Technologies and Materials for Renewable Energy, Environment and Sustainability -Tmrees152015, pp. 736-744. https://doi.org/10.1016/j.egypro.2015.07.809.10.1016/j.egypro.2015.07.809 ↗
26. Concentration dependent optical and structural properties of Mo doped ZnTe thin films prepared by e-beam evaporation method10.1016/S1452-3981(23)07981-6 ↗
27. High efficiency silicon solar cells with back ZnTe layer hosting IPV effect: a numerical case study10.1080/16583655.2019.1623476 ↗
28. Band alignment of front contact layers for high-efficiency CdTe solar cells10.1016/j.solmat.2016.05.050 ↗
29. Simulation of high-efficiency CdTe solar cells with Zn1-xMgxO window layer by SCAPS software10.1088/2053-1591/aacae2 ↗
30. M. Gloeckler, A.L. Fahrenbruch, J.R. Sites, Numerical modeling of CIGS and CdTe solar cells: setting the baseline, in: K. Kurokawa, L.L. Kazmerski, B. McNelis, M. Yamaguchi, C. Wronski, W.C. Sinke (Eds.), Proceedings of 3rd World Conference on Photovoltaic Energy Conversion, Vols a-C2003, pp. 491-494.
31. Simulation approach for optimization of device structure and thickness of HIT solar cells to achieve similar to 27% efficiency10.1016/j.solener.2012.11.008 ↗
32. Yang · 2010
33. Correlation between carrier recombination and valence band offset effect of graded Cu(In,Ga)Se-2 solar cells10.1016/j.solmat.2019.110070 ↗
34. Optical properties of ZnTe doped with transition metals (Ti, Cr and Mn)10.1007/s11082-013-9708-y ↗
35. Efficiency enhancement of CIGS solar cell by WS2 as window layer through numerical modelling tool10.1016/j.solener.2020.07.007 ↗
36. Perceiving of defect tolerance in perovskite absorber layer for efficient perovskite solar cell10.1109/ACCESS.2020.3000217 ↗