Fabrication and characterization of Tm3+-Ho3+ co-doped tellurite glass microsphere lasers operating at ∼2.1 μm
Source abstract
Abstract
Abstract We used a Tm3+-Ho3+ co-doped tellurite glass as the laser medium to build active microsphere laser resonators. A droplet method is implemented and hundreds of high quality microspheres can be fabricated simultaneously. Typical Quality factors (Q-factors) of microspheres fabricated in this work reach 106. Silica fiber tapers are used as the coupling mechanism and a commercial 808 nm laser diode is used as the pump source. Laser lines at ∼2.1 μm can be observed in the emission spectrum of these active microsphere resonators. Pump thresholds for generating single mode laser lines in a 59.52 μm diameter microsphere is measured to be 0.887 mW and as the pump power is increased to 1.413 mW, multi-mode laser lines can be generated. We also demonstrate microsphere lasers fabricated in this work can be thermally tuned with a temperature sensitivity of 32 pm/°C, implying these microspheres can be used as highly compact temperature sensors in various mid-infrared applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photonic and Optical Devices · Semiconductor Lasers and Optical Devices · Phase-change materials and chalcogenides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Chalcogenide photonics10.1038/nphoton.2011.309 ↗
2. Quasi-single mode laser output from a terrace structure added on a Nd3+-doped tellurite-glass microsphere prepared using localized laser heating10.1364/OE.23.020629 ↗
3. Laser emission of a Nd-doped mixed tellurite and zinc oxide glass10.1364/JOSAB.31.001590 ↗
4. Chalcogenide glass microsphere laser10.1364/OE.18.026720 ↗
5. Upconversion lasing of a thulium-ion-doped fluorozirconate glass microsphere10.1063/1.371064 ↗
6. Fabrication of high-Q polydimethylsiloxane optical microspheres for thermal sensing10.1063/1.3152791 ↗
7. S-band Tm3+-doped tellurite glass microsphere laser via a cascade process10.1063/1.1810628 ↗
8. Tm3+ doped tellurite glass microsphere laser
9. Low threshold lasing at 1975 nm in thulium doped tellurite glass microspheres10.1364/OL.40.005227 ↗
10. Cascaded Raman lasing in packaged high quality As2S3 microspheres10.1364/OE.22.028731 ↗
11. 2.0 μm emission properties and energy transfer of Tm3+/Ho3+-codoped tellurite glass10.7498/aps.56.4200 ↗
12. Chalcogenide glass microspheres; their production, characterization and potential10.1364/OE.15.017542 ↗
13. Low temperature fabrication of chalcogenide microsphere resonators for thermal sensing10.1109/LPT.2016.2628810 ↗
14. Kenny · 1991 · vol. 27(18) · 1654
15. The shape of fiber tapers10.1109/50.134196 ↗
16. Ultra low loss optical fiber nanotapers10.1364/OPEX.12.002258 ↗
17. Fiber taper coupling to chalcogenide microsphere modes10.1063/1.2918128 ↗
18. Asymptotic expansion of morphological resonance frequencies in Mie scattering10.1364/AO.32.002181 ↗
19. Germanium microsphere high-Q resonator10.1364/OL.37.000728 ↗
20. Observation of microlaser with Er-doped phosphate glass coated microsphere pumped by 780 nm10.1016/j.optcom.2010.07.018 ↗
21. Fiber-taper-coupled L-band Er3+-doped tellurite glass microsphere laser10.1063/1.1559653 ↗
22. Packaged microsphere-taper coupling system with a high Q factor10.1364/AO.54.000277 ↗
23. Highly sensitive compact refractive index sensor based on phase-shifted sidewall Bragg gratings in slot waveguide10.1364/AO.53.000096 ↗