Optimization of defected ZnO/Si/Cu2O heterostructure solar cell
Source abstract
Abstract
Abstract In the present work, we review the optimization of the performance of a newly defected ZnO/Si/Cu2O heterojunction solar cell using the Analysis of Microelectronic and Photonic Structures (AMPS-1D) computer simulator under the AM1.5G illumination and the operating temperature of 300 K. The light J-V characteristics were investigated by varying the input parameters and the temperature. The use of p-type Cu2O-back layer in the structure is to enhance the open-circuit voltage (VOC). The performance of ZnO/Si/Cu2O heterojunction solar cell is studied in order to optimize the layers parameters, such as the thickness of p-Si absorber layer, the doping and the defects concentrations of the p-Si absorber layer and to obtain an efficient proposed structure. The defects concentration of p-Si absorber layer was fixed in the first step at Ndef(p-Si) = 1014/cm3. With the optimized p-Si layer parameters, an efficiency of 16.23% was obtained with JSC ~26.25 mA/cm2, VOC ~0.72 V and FF~0.85 for n-ZnO window (0.1 μm)/p-Si Absorber (10 μm)/p-Cu2O (0.1 μm) heterostructure. For Ndef(p-Si) lower than 1014/cm3, the AMPS-1D simulation showed an appreciable performance. For Ndef(p-Si) = 1011/cm3 we estimate best characteristics of about: JSC ~27.57 mA/cm2, VOC ~0.78 V, FF~0.90 and Eff ~ 21.78%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper-based nanomaterials and applications · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Surface polarity control in ZnO films deposited by pulsed laser deposition10.1016/j.apsusc.2019.03.228 ↗
2. Particle size effects on the hydrogen sensing properties of Pd/ZnO Schottky contacts fabricated by sol–gel method10.1016/j.ijhydene.2016.08.201 ↗
3. Experimental investigation of various copper oxide electrodeposition conditions on photoelectrochemical hydrogen production10.1016/j.ijhydene.2016.12.067 ↗
4. Influence of stress on the photocatalytic properties of sprayed ZnO thin films10.1016/j.solmat.2019.110058 ↗
5. Room temperature photoluminescence of spray-deposited ZnO thin films on glass substrates10.1016/j.ijhydene.2017.03.008 ↗
6. ZnO thin films deposited by RF magnetron sputtering: effects of the annealing and atmosphere conditions on the photocatalytic hydrogen production10.1016/j.ijhydene.2018.04.054 ↗
7. Fabrication of Cu2O nanocrystalline thin films photosensor prepared by RF sputtering technique10.1016/j.physe.2017.08.007 ↗
8. Effect of anionic bath temperature on morphology and photo electrochemical properties of Cu2O deposited by SILAR10.1016/j.mssp.2018.07.031 ↗
9. Thin-film transistors based on p-type Cu2O thin films produced at room temperature
10. The sensitivity of gas sensor based on single ZnO nanowire modulated by helium ion radiation10.1063/1.2800812 ↗
11. Gas sensing properties of Cu2O and its particle size and morphology-dependent gas-detection sensitivity10.1039/C4TA02659D ↗
12. Synthesis of ZnO–CuO porous core–shell spheres and their application for non-enzymatic glucose sensor10.1007/s00339-014-8855-8 ↗
13. Band gap varied cuprous oxide (Cu2O) thin films as a tool for glucose sensing10.1007/s00604-016-1949-6 ↗
14. Cu2O precipitation-assisted with ultrasound and microwave radiation for photocatalytic hydrogen production10.1016/j.ijhydene.2017.03.192 ↗
15. Photocatalytic activity of ZnO nanoparticles with optimization of defects10.1016/j.materresbull.2017.08.019 ↗
16. Preparation of cubic Cu2O nanoparticles wrapped by reduced graphene oxide for the efficient removal of rhodamine B10.1016/j.jallcom.2017.05.132 ↗
17. Efficient charge carrier separation and excellent visible light photoresponse in Cu2O nanowires10.1016/j.nanoen.2018.05.028 ↗
18. ZnO/Cu2O/Si nanowire arrays as ternary heterostructure-based photocatalysts with enhanced photodegradation performances10.1186/s11671-019-3093-9 ↗
19. Solution-processed ZnO/Si based heterostructures with enhanced photocatalytic performance10.1039/C8NJ03015D ↗
20. Efficient photocatalysts made by uniform decoration of Cu2O nanoparticles on Si nanowire arrays with low visible reflectivity10.1186/s11671-018-2735-7 ↗
21. Optical, structural and phase transition properties of Cu2O, CuO and Cu2O/CuO: their photoelectrochemical sensor applications
22. Strong yellow emission of ZnO hollow nanospheres fabricated using polystyrene spheres as templates10.1016/j.matdes.2015.06.141 ↗
23. Enhanced fluorescence imaging performance of hydrophobic colloidal ZnO nanoparticles by a facile method10.1016/j.jallcom.2014.09.072 ↗
24. Enhanced performance of light-controlled conductive switching in hybrid cuprous oxide/reduced graphene oxide (Cu2O/rGO) nanocomposites10.1364/OL.42.000911 ↗
25. Efficiency enhancement of ZnO/Cu2O solar cells with well oriented and micrometer grain sized Cu2O films10.1063/1.5017002 ↗
26. Electrochemically deposited p-n homojunction cuprous oxide solar cells10.1016/j.solmat.2008.09.023 ↗
27. Single cuprous oxide films synthesized by radical oxidation at low temperature for PV application10.1364/OE.21.011448 ↗
28. The doping effect on the properties of zinc oxide (ZnO) thin layers for photovoltaic applications10.1016/j.ijhydene.2015.02.075 ↗
29. Interface functionalization with polymer self-assembly to boost photovoltage of Cu2O/ZnO nanowires solar cells10.1016/j.ijhydene.2014.04.108 ↗
30. New ultra thin CIGS structure solar cells using SCAPS simulation program10.1016/j.ijhydene.2017.02.099 ↗
31. A study of CdTe solar cells using Ga-doped MgxZn1-xO buffer/TCO layers: simulation and performance analysis
32. Si/ZnO heterostructures for efficient diode and water-splitting applications10.1016/j.ijhydene.2018.07.038 ↗
33. Growth and characterization of electrodeposited Cu2O thin films10.1088/0268-1242/28/11/115005 ↗
34. Electrodeposited ZnO/Cu2O heterojunction solar cells10.1016/j.electacta.2007.09.030 ↗
35. High-efficiency oxide solar cells with ZnO/Cu2O heterojunction fabricated on thermally oxidized Cu2O sheets
36. The impact of heterojunction formation temperature on obtainable conversion efficiency in n-ZnO/p-Cu2O solar cells10.1016/j.tsf.2012.09.090 ↗
37. Current status and future prospects of copper oxide heterojunction solar cells10.3390/ma9040271 ↗
38. Numerical study of metal oxide heterojunction solar cells10.1088/0268-1242/26/8/085026 ↗
39. Electrical characterization of n-ZnO/p-Si heterojunction prepared by spray pyrolysis technique10.1016/j.phpro.2014.07.010 ↗
40. High efficiency computer simulation for Au/n-ZnO/p-Si/Al Schottky-type thin film heterojunctions10.1007/s12633-016-9430-z ↗
41. Modeling and simulation of AlxGayIn1-x-yAs/InP quaternary structure for photovoltaic10.1016/j.ijhydene.2014.04.162 ↗
42. A manual for one-dimensional device simulation program (AMPS), Electron
43. 50 μm thin solar cells with 17.0% efficiency10.1016/j.solmat.2008.09.035 ↗
44. Flexible concentrator photovoltaics based on microscale silicon solar cells embedded in luminescent waveguides10.1038/ncomms1318 ↗
45. Microsystems enabled photovoltaics: 14.9% efficient 14 μm thick crystalline silicon solar cell10.1016/j.solmat.2010.09.015 ↗
46. Nanopyramid structure for ultrathin c-Si tandem solar cells10.1021/nl500366c ↗
47. TiO2/Cu2O all-oxide heterojunction solar cells produced by spray pyrolysis10.1016/j.solmat.2014.10.005 ↗
48. Cu2O/ZnO heterojunction thin-film solar cells: the effect of electrodeposition condition and thickness of Cu2O10.1016/j.tsf.2018.07.023 ↗
49. Isabella · 2016
50. Empirical determination of the energy band gap narrowing in highly doped n+ silicon10.1063/1.4816694 ↗
51. Determining the charge states and capture mechanisms of defects in silicon through accurate recombination analyses: a review10.1016/j.solmat.2018.07.029 ↗