journal article·2019-06

Fabrication of Y2O3 transparent ceramics by hot isostatic pressing from precipitated nanopowders

Xinyou Huang, Xing Zhang, Zewang Hu, Yagang Feng, Jiabei Wei, Xin Liu, Xiaoying Li, Haohong Chen, Lexiang Wu, Hongming Pan, Jiang Li

Optical Materials· Volume 92
Publisher page

Abstract

Abstract Yttrium (Y2O3) nanopowders were synthesized via the precipitation method using ammonium hydrogen carbonate (AHC) as the precipitant. The influences of calcination temperature on the composition and morphology of the powders were investigated. Fine Y2O3 powders with low-agglomeration were obtained by calcining the precursor at 1100 °C for 4 h. The primary crystallites were calculated to be ∼47 nm in size and weakly agglomerated to particles with size of ∼79 nm. Using the synthesized powders as the starting materials, Y2O3 ceramics were fabricated by vacuum sintering at different temperatures combined with HIP post-treatment. The densification and micro-structure evolution of the Y2O3 ceramics were systematically investigated. The ceramic sample vacuum sintered at 1500 °C for 2 h and post-HIPed at 1550 °C for 3 h exhibited a uniform and fine microstructure with the average grain of about 1.0 μm. The in-line transmittance of the ceramic sample reached 80.1% at 1100 nm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear materials and radiation effects · Luminescence Properties of Advanced Materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Application for refractory and corrosion resistant materials
2. Infrared transmittance of crystalline yttrium oxide and related compounds10.1149/1.2426061 ↗
3. Point defects in optical ceramics: high-temperature absorption processes in lanthana-strengthened yttria10.1111/j.1151-2916.1990.tb09784.x ↗
4. Polycrystalline ceramic lasers10.1063/1.1662008 ↗
5. Synthesis of transparent Nd-doped HfO2–Y2O3 ceramics using HIP10.1111/j.1151-2916.1996.tb08129.x ↗
6. Fluorescence and stimulated emission from trivalent europium in yttrium oxide10.1063/1.1729247 ↗
7. Transparent yttrium oxide ceramics10.1016/0025-5408(67)90096-7 ↗
8. Fabrication of transparent ThO2-doped Y2O3
9. Densification of yttria transparent ceramics: the utilization of activated sintering10.1111/jace.14164 ↗
10. Effect of gamma-Al2O3 additives on the microstructure of Y2O3 ceramics10.1007/s10854-015-4169-7 ↗
11. Novel fabrication, microstructure and up-conversion photoluminescence properties of Tm3+,Yb3+co-doped Y2O3 translucent ceramics10.1016/j.jallcom.2016.07.065 ↗
12. High sinterability nano-Y2O3 powders prepared via decomposition of hydroxyl-carbonate precursors for transparent ceramics10.1007/s10853-017-1071-0 ↗
13. Precipitation synthesis and sintering of yttria nanopowders10.1016/j.matlet.2004.02.008 ↗
14. Fabrication of well-dispersed Y2O3 nano-powders by poly (acrylic acid) low-temperature combustion10.1016/j.apt.2015.11.004 ↗
15. Fabrication of Yb:Sc2O3 transparent ceramics from co-precipitated nanopowders: the effect of ammonium hydrogen carbonate to metal ions molar ratio10.1016/j.optmat.2017.11.035 ↗
16. Infrared transparent Y2O3-MgO nanocomposites fabricated by the glucose sol-gel combustion and hot-pressing technique10.1111/jace.13681 ↗
17. Morphology of Y2O3: Eu3+ prepared by hydrothermal synthesis10.1016/j.cplett.2009.01.023 ↗
18. Co-precipitation synthesis of nano Y2O3: Eu3+ with different morphologies and its photoluminescence properties10.1016/j.ceramint.2014.03.081 ↗
19. Effect of co-doping metal ions (Li+, Na+ and K+) on the structural and photoluminescent properties of nano-sized Y2O3:Eu3+ Synthesized by co-precipitation method10.1016/j.optmat.2014.02.014 ↗
20. Fabrication of Tb3Al5O12 transparent ceramics using co-precipitated nanopowders: the influence of ammonium hydrogen carbonate to metal ions molar ratio10.1016/j.ceramint.2017.07.225 ↗
21. Preparation of ceria-zirconia mixed oxides with improved thermal stability for three-way catalysts by a modified co-precipitation method
22. Thermal and optical properties of transparent magnesium oxide ceramics fabricated by post hot-isostatic pressing10.1016/j.jeurceramsoc.2005.06.011 ↗
23. Hot isostatic pressing of transparent AlON ceramics with Y2O3/La2O3 additives10.1016/j.jallcom.2015.08.028 ↗
24. Synthesis and optical properties of Yb0.6Y1.4O3 transparent ceramics10.1016/j.jallcom.2007.10.005 ↗
25. Synthesis, processing and properties of submicrometer-grained highly transparent yttria ceramics10.1111/j.1551-2916.2010.03601.x ↗
26. Low temperature-sintering and microstructure of highly transparent yttria ceramics10.1016/j.jallcom.2016.11.164 ↗
27. Synthesis of YAG powders by the co-precipitation method10.1016/j.ceramint.2008.10.002 ↗
28. Synthesis of monodispersed spherical yttrium aluminum garnet (YAG) powders by a homogenous precipitation method
29. Synthesis of Nd:Y2O3 nanopowders leading to transparent ceramics10.1016/j.matchemphys.2011.02.006 ↗
30. Synthesis of nanostructured Nd:Y2O3 powders by carbonate-precipitation process for Nd:YAG ceramics10.1016/j.jeurceramsoc.2013.04.029 ↗
31. Assessment of light scattering by pores in Nd:YAG transparent ceramics10.1016/j.jallcom.2011.12.012 ↗
32. Fabrication, microstructure and spectroscopic properties of Yb:Lu2O3 transparent ceramics from co-precipitated nanopowders
33. Optical spectroscopic properties, 0.946 and 1.074 mm laser performances of Nd3+-doped Y2O3 transparent ceramics10.1016/j.jallcom.2017.03.343 ↗
34. Defects in laser ceramics