Stoichiometry control in molecular beam epitaxy of BaSnO3
Source abstract
Abstract
La-doped $\mathrm{BaSn}{\mathrm{O}}3$ films were grown on $\mathrm{DySc}{\mathrm{O}}3$ substrates by molecular beam epitaxy using La, Ba, and $\mathrm{Sn}{\mathrm{O}}2$ sources with and without additional oxidant, respectively. Lattice parameter measurements as a function of growth conditions show a reduced lattice parameter that is likely due to substitution of $\mathrm{S}{\mathrm{n}}2+$ on the Ba site. The propensity for the antisite defect is discussed as being due to the combination of oxygen-poor, Sn-rich conditions and the dual valence of Sn. Although electron mobilities are highest for films with reduced lattice parameters, antisite defects will pose an upper limit to thin film mobility. Less Sn-rich conditions lead to the formation of another defect that causes a lattice expansion. The combined effects of these defects on the lattice parameter can compensate each other and cause the appearance of a stoichiometric lattice parameter for nonstoichiometric films with poor electrical behavior.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electronic and Structural Properties of Oxides · ZnO doping and properties · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Materials Department, University of California, Santa Barbara, California 93106, USA
Funding
Office of Naval Research · Defense Advanced Research Projects Agency · National Science Foundation · Materials Research Science and Engineering Center, Harvard University
References (41)
Show source-provided references
1. 10.1143/APEX.5.06110210.1143/APEX.5.061102 ↗
2. 10.1103/PhysRevB.86.16520510.1103/PhysRevB.86.165205 ↗
3. 10.1063/1.470941510.1063/1.4709415 ↗
4. 10.1063/1.492133810.1063/1.4921338 ↗
5. 10.1109/TED.2018.288883410.1109/TED.2018.2888834 ↗
6. 10.1063/1.509779110.1063/1.5097791 ↗
7. 10.1103/PhysRevB.44.951910.1103/PhysRevB.44.9519 ↗
8. 10.1021/ja048866i10.1021/ja048866i ↗
9. 10.1116/1.495900410.1116/1.4959004 ↗
10. 10.1063/1.495467110.1063/1.4954671 ↗
11. 10.1063/1.493965710.1063/1.4939657 ↗
12. 10.1063/1.500183910.1063/1.5001839 ↗
13. 10.1063/1.317693210.1063/1.3176932 ↗
14. 10.1116/1.296642310.1116/1.2966423 ↗
15. 10.1103/PhysRevLett.116.02760210.1103/PhysRevLett.116.027602 ↗
16. 10.1116/1.493340110.1116/1.4933401 ↗
17. 10.1039/C7TC00190H10.1039/C7TC00190H ↗
18. 10.1088/0953-8984/15/49/01010.1088/0953-8984/15/49/010 ↗
19. 10.1016/j.jssc.2013.01.01510.1016/j.jssc.2013.01.015 ↗
20. 10.1016/j.progsurf.2005.09.00210.1016/j.progsurf.2005.09.002 ↗
21. 10.1063/1.497299510.1063/1.4972995 ↗
22. 10.1103/PhysRevB.87.16120110.1103/PhysRevB.87.161201 ↗
23. 10.1063/1.55579910.1063/1.555799 ↗
24. 10.1039/tf965610136410.1039/tf9656101364 ↗
25. 10.1524/zpch.1999.209.Part_2.27110.1524/zpch.1999.209.Part_2.271 ↗
26. 10.1103/PhysRevB.97.05411210.1103/PhysRevB.97.054112 ↗
27. See Supplemental Material at http://link.aps.org/supplemental/10.1103/PhysRevMaterials.4.014604 for a representative reciprocal space map, atomic force microscopy images of the films surfaces, and mobility measurements using Hall bar structures.
28. 10.1007/s11664-019-07336-x10.1007/s11664-019-07336-x ↗
29. 10.1063/1.11637610.1063/1.116376 ↗
30. E. K. Kazenas · Russian Metallurgy (Rossiiskaya akademiya nauk. Metally) · 1996 · 3 · 36
31. 10.1016/S0040-6090(98)00507-010.1016/S0040-6090(98)00507-0 ↗
32. 10.1016/S0921-5107(01)00726-710.1016/S0921-5107(01)00726-7 ↗
33. J. Y. Tsao · 1993
34. 10.1063/1.318476710.1063/1.3184767 ↗
35. 10.1063/1.214606910.1063/1.2146069 ↗
36. 10.1063/1.491996910.1063/1.4919969 ↗
37. 10.1143/JJAP.49.09MC0410.1143/JJAP.49.09MC04 ↗
38. 10.1063/1.336773310.1063/1.3367733 ↗
39. 10.1063/1.512620610.1063/1.5126206 ↗
40. Y.-M. Chiang · 1997
41. 10.1116/1.58703610.1116/1.587036 ↗