article·1985-12-16

Recovery of internal friction in cold-worked aluminium containing 0.35 wt% Fe

G. Graiss, Gamal R. Saad

Publisher page

Abstract

Solution treated as well as aged wires of an Al alloy containing 0.35 wt% Fe are subjected to different amounts of pre-torsional deformation up to 8% at room temperature, the internal friction Q of these wires is then measured as a function of the time following deformation. It is found that the time dependence of the decay of Q can be fairly described by an Avrami-type equation of the form: (Q – Q) = (Q – Q) exp Ktn with the time power n equals about 1/3. The decay rate K is found to take values strongly dependent on the degree of pre-deformation in case of the solution treated specimens, while such a dependence is not observed in the aged specimens. The results are essentially explained on the basis of dislocation damping.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.