article·1997-10-01

Pd-Based Ohmic Contacts to n-GaSb

K. Varblianska, K. Tzenev, T. Kotsinov

Publisher page

Abstract

Electron beam evaporated Ge/Pd, Ge/Pd/Sb, Pd/Sb and Pd contacts to n-GaSb are produced. The I—V characteristics of as-deposited and annealed at 250 to 450 °C diode structures are measured and Rc is specified. The ohmic behavior of Ge-containing contacts is reached after annealing at 300 to 325 °C. The transition is either due to n-Ge/n-GaSb heterojunction formation or to Ge incorporation on VGa depending on the Ge/Pd layer thickness ratio. The Pd and Pd/Sb contacts become ohmic at 350 and 300 °C, respectively. The lowest Rc (10—3 to 10—4Ωcm2) and the best thermal stability up to 450 °C is exhibited by the Pd/Sb contact. This results allowed us to interpret the degradation of the Pd-based contacts at Tann ≥ 400 °C in terms of VSb formation and GaSb surface partial compensation. An X-ray microprobe analysis of the Ge/Pd contact composition upon annealing is performed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Semiconductor materials and interfaces · Semiconductor materials and devices · Semiconductor Quantum Structures and Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.