Numerical Study of a High-Performance SPR Sensor Using ZnS and Fluorinated Graphene with Consideration of Experimental Parameters
Source abstract
Abstract
Abstract A surface plasmon resonance (SPR)-based sensor, which consists of aluminum (Al) as a plasmonic metal and zinc sulfide (ZnS) as the dielectric layer, has been proposed in a modified Kretschmann configuration. An engineered layer of Fluorinated Graphene (FG) as a 2D nanomaterial has been included in the proposed configuration for better interaction with the bio-analyte. The proposed sensing device is designed using the Transfer matrix and finite element methods for angle interrogation at the wavelength of 1550 nm, considering performance parameters like sensitivity, SPR linewidth, detection accuracy, and figure of merit (FOM). The multilayered engineered plasmonic sensor is found to have a maximum value of sensitivity (242.85 °/RIU) and enhanced FOM (451.88 RIU− 1). The effect of different glass substrates, plasmonic metals, dielectric, and 2D nanomaterials on the performance parameters has been studied. Finally, the engineered plasmonic biosensor {CaF2-Al (30nm)-ZnS (2nm)-FG} is used to detect different malaria stages by distinguishing healthy and malaria-infected red blood cells, showing its potential as one of the best candidates for biomedical applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Advanced Fiber Optic Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Uniyal A, Srivastava G, Pal A et al (2023) Recent advances in optical biosensors for sensing applications: a review. Plasmonics 18:735–75010.1007/s11468-023-01803-2 ↗
2. Homola J, Yee SS, Gauglitz G (1999) Surface plasmon resonance sensors. Sens Actuators B Chem 54:3–1510.1016/S0925-4005(98)00321-9 ↗
3. Sharma AK, Jha R, Gupta BD (2007) Fiber-optic sensors based on surface plasmon resonance: a comprehensive review. IEEE Sens J 7(8):1118–112910.1109/JSEN.2007.897946 ↗
4. Jha R, Sharma AK (2009) Performance comparison of SPR sensors based on chalcogenide and silica glass prisms. Sens Transducers 101:123
5. Prabowo BA, Purwidyantri A, Liu KC (2018) Surface plasmon resonance optical sensor: a review on light source technology. Biosensors 8(3):8010.3390/bios8030080 ↗
6. Pandey PS, Singh Y, Raghuwanshi SK (2021) Theoretical analysis of the LRSPR sensor with enhanced FOM for low refractive index detection using MXene and fluorinated graphene. IEEE Sens J 21:23979–2398610.1109/JSEN.2021.3112530 ↗
7. Pandey AK, Sharma AK (2018) Simulation and analysis of plasmonic sensor in NIR with fluoride glass and graphene layer. Photonics Nanostruct Fundam Appl 28:94–9910.1016/j.photonics.2017.12.003 ↗
8. Bouandas H et al (2025) Plasmonic sensor design: Cu–SiO₂–Ni–black phosphorus for enhanced surface plasmon resonance in visible regime. Microchim Acta 192:11410.1007/s00604-025-06976-7 ↗
9. Runthala R, Grover N, Arora P (2025) TiO2-FG-based plasmonic sensor with enhanced figure of merit for sensing applications: a numerical approach. Optik 17242110.1016/j.ijleo.2025.172421 ↗
10. Zaman MU, Ansari G, Uniyal A, Alqhtani NR, Pal A, Alqahtani AS, Singh H, Bin Nabhan A, Alqahtani KA (2025) Antimonene, barium titanate and silver layer–based surface plasmon resonance sensor for dental application: a numerical analysis. Plasmonics:1–910.1007/s11468-025-03020-5 ↗
11. Paswan MK, Basu R (2025) Surface plasmon resonance sensor using graphene/MXene heterostructure for detection of salinity induced water contamination. Plasmonics 1–1710.1007/s11468-025-03088-z ↗
12. Paswan MK, Basu R (2025) Surface plasmon resonance sensor for milk adulteration detection using a CaF₂ prism, Ag film, and black phosphorus layer. Micro Nanoestruct 205:20819310.1016/j.micrna.2025.208193 ↗
13. Paswan MK, Basu R (2024) Hybrid structure–based SPR sensor for chemical sensing with enhanced sensitivity. Plasmonics 19:765–77610.1007/s11468-023-02020-7 ↗
14. Singh Y, Paswan MK, Raghuwanshi SK (2021) Sensitivity enhancement of SPR sensor with the black phosphorus and graphene with bi-layer of gold for chemical sensing. Plasmonics 16:1781–179010.1007/s11468-020-01315-3 ↗
15. Kumar R, Praveen P, Garia L (2025) Optimized long-range surface plasmon resonance sensor for high-performance acetone detection. Plasmonics:1–1410.1007/s11468-025-02997-3 ↗
16. Kumar R, Garia S, Joshi S, Pal A, Singh I, Sahu UK (2025) A high-performance SPR biosensor for female reproductive hormone detection. IEEE Access 13:86057–8606810.1109/ACCESS.2025.3569574 ↗
17. Shukla S, Singh S, Agarwal A, Sharma VK, Pal A (2023) Highly sensitive surface plasmon-based refractive index sensor in the optical communication band using ZnS-PVP layers. In: 2023 IEEE devices for integrated circuit (DevIC) IEEE
18. Hossain MB, Tasnim T, Abdulrazak LF, Rana MM, Islam MR (2020) A numerical approach to design the Kretschmann configuration based refractive index graphene-MoS₂ hybrid layers with TiO₂-SiO₂ nano for formalin detection. Photon Sens 10:134–14610.1007/s13320-019-0566-5 ↗
19. Basak C, Hosain MK, Islam MS, Kouzani AZ (2023) Design and modeling of an angular interrogation based surface plasmon resonance biosensor for dengue virus detection. Opt Quantum Electron 55:43810.1007/s11082-023-04708-w ↗
20. Ansari G, Oweis R, Baldaniya L, Barakat M, Jyothi RS, Kaur I, Al-Hasnaawei S, Maharana L, Chauhan AS, Purohit B, Uniyal A (2025) Early detection of chikungunya virus using silver and zinc selenide multilayer structure utilizing the surface plasmon resonance: a numerical approach. Plasmonics 1–1210.1007/s11468-025-02978-6 ↗
21. Ansari G, Kanjariya P, Reddy MS, Choudhury S, Albert HM (2025) Refractive index sensing-based surface plasmon resonance sensor for sensitivity enhancement: theoretical analysis. Plasmonics 1–1210.1007/s11468-025-03082-5 ↗
22. Kumar R, Sharma Y, Ray S, MM R, Jain B, Pal A (2025) Detection of urine glucose concentration using zirconium nitride surface plasmon resonance sensor. Plasmonics 1–1010.1007/s11468-025-02853-4 ↗
23. Agbo PE, Nwofe PA, Odo LO (2017) Analysis on energy bandgap of zinc sulphide (ZnS) thin films grown by solution growth technique. Chalcogenide Lett 14(8):355–362
24. Ansari G, Pandey A, Kumar R, Sharma Y, Pal A (2025) Silver-PVP-nickel and ZnS layered surface plasmon resonance sensor for petrochemical sensing applications. J Mater Res 40(2):223–23510.1557/s43578-024-01494-3 ↗
25. Karki B, Sathya N, Rane KP, Jha A, Pal A (2022) Sensitivity enhancement of a graphene, zinc sulfide-based surface plasmon resonance biosensor with an Ag metal configuration in the visible region. J Comput Electron 21(2):445–45210.1007/s10825-022-01854-4 ↗
26. Sahu AK, Sharma Y, Ray S, Mohanty S, Pal A (2024) An investigation on effect of various mono and Di-sulphide coatings on the performance of an Au–Ag bimetallic SPR sensor: an attempt towards noninvasive urine-glucose detection. Opt Quantum Electron 56(1):10810.1007/s11082-023-05620-z ↗
27. Chithravel A, Jeyachitra RK, Shobana K, Sangeetha M, Palanisamy P, Sharma AK (2024) 2D material assisted prism based surface plasmon resonance sensors: a comprehensive survey. Opt Laser Eng 182:10845210.1016/j.optlaseng.2024.108452 ↗
28. Bansal A, Srivastava SK (2024) High performance SPR sensor using 2-D materials: a treatise on design aspects, material choice and figure of merit. Sens Actuators A Phys 369:115159. https://doi.org/10.1016/j.sna.2024.11515910.1016/j.sna.2024.115159 ↗
29. Pandey PS, Raghuwanshi SK, Kumar S (2021) Recent advances in two-dimensional materials-based Kretschmann configuration for SPR sensors: a review. IEEE Sens J 22(2):1069–108010.1109/JSEN.2021.3133007 ↗
30. Ansari G et al (2025) Surface plasmon resonance sensor with multilayers structure for enhanced sensitivity for pregnancy detection: theoretical analysis. Plasmonics. https://doi.org/10.1007/s11468-025-02074-210.1007/s11468-025-02074-2 ↗
31. Uniyal A, Srivastava G, Pal A, Taya S, Muduli A (2023) Fluorinated graphene and CNT-based surface plasmon resonance sensor for detecting the viral particles of SARS-CoV-2. Physica B 669:41528210.1016/j.physb.2023.415282 ↗
32. Kumar R et al (2025) A theoretical approach for sensitivity enhancement using refractive index-based surface plasmon resonance sensor. Plasmonics. https://doi.org/10.1007/s11468-025-02062-610.1007/s11468-025-02062-6 ↗
33. Kumar R et al (2025) Detection of COVID-19 using surface plasmon resonance sensor for sensitivity enhancement: theoretical analysis. Plasmonics. https://doi.org/10.1007/s11468-025-02061-710.1007/s11468-025-02061-7 ↗
34. Phiri IK, Zekriti M (2024) Sensitivity and performance enhancement of an SPR biosensor using a gold-silver alloy, zinc oxide and graphene. Opt Quantum Electron 56:1332. https://doi.org/10.1007/s11082-024-06399-y10.1007/s11082-024-06399-y ↗
35. Das S, Sen R (2024) Design and numerical analysis of a PCF-SPR sensor for early-stage malaria detection. Plasmonics 19:2565–2580. https://doi.org/10.1007/s11468-024-01793-610.1007/s11468-024-01793-6 ↗
36. Mohan V, Pal A, Sharma S (2024) Numerical simulation of a high sensitivity SPR sensor for rapid malaria diagnosis using BP and graphene 2D materials. Plasmonics. https://doi.org/10.1007/s11468-024-01910-510.1007/s11468-024-01910-5 ↗
37. Daher MG, Nassef A, Ayad A, Hussein EA, Oraby AH (2023) Highly sensitive detection of infected red blood cells (IRBCs) with plasmodium falciparum using surface plasmon resonance (SPR) nanostructure. Opt Quantum Electron 55:19910.1007/s11082-022-04466-1 ↗
38. Sharma AK, Gupta BD (2007) On the performance of different bimetallic combinations in surface plasmon resonance based fiber optic sensors. J Appl Phys 101:09311110.1063/1.2721779 ↗
39. Uniyal S, Kumar M, Srivastava G, Pal A, Muduli A (2022) Recent advances in K-SPR sensors for the detection of biomolecules and microorganisms: a review. IEEE Sens J 22(12):11415–1142610.1109/JSEN.2022.3172115 ↗
40. Shukla S, Arora P (2021) Design and analysis of aluminum-silicon-graphene based plasmonic device for biosensing applications in the optical communication band. Silicon 13(10):3703–371110.1007/s12633-021-00953-4 ↗
41. Tang X, Kou L (2022) 2D Janus transition metal dichalcogenides: properties and applications. Phys. Status Solidi B 259(4):210056210.1002/pssb.202100562 ↗
42. Babariya B, Gupta SK, Gajjar PN (2023) Theoretical designing of TMDs Janus heterostructures toward efficient photovoltaic and electronic applications. Surf Interfaces 42:10340910.1016/j.surfin.2023.103409 ↗
43. Xie Y, Zhang L, Li J, Chen H, Wang T (2023) Polymer and hybrid optical devices manipulated by the thermo-optic effect. Polymers 15(18):372110.3390/polym15183721 ↗
44. Leviton DB, Frey BJ, Madison TJ (2007) Temperature-dependent refractive index of CaF₂ and infrasil 301. In: Cryogenic optical systems and instruments XII, SPIE proc 6692
45. Karki B, Sathya N, Rane KP, Jha A, Pal A (2024) Gold, MXene, and graphene nanofilm-based surface plasmon resonance sensor for malaria detection. J Opt 53(5):4805–481610.1007/s12596-024-01661-z ↗
46. Karki B, Sathya N, Rane KP, Jha A, Pal A (2024) Tuning sensitivity of bimetallic, MXene and graphene-based SPR biosensors for rapid malaria detection: a numerical approach. J Comput Electron 23(4):920–92910.1007/s10825-024-02191-4 ↗
47. Panda A, Pukhrambam PD (2021) Modeling of high-performance SPR refractive index sensor employing novel 2D materials for detection of malaria pathogens. IEEE Trans NanoBiosci 21:312–31910.1109/TNB.2021.3115906 ↗
48. Singh S, Singh P, Singh V, Pal A (2023) Theoretical study of malaria detection in blood samples using bimetal layer and zinc telluride nanomaterial-based surface plasmon resonance biosensor. Plasmonics 18:2125–213610.1007/s11468-023-01913-x ↗