Optimization of Surface Plasmon Resonance Biosensor with Ag/Au Multilayer Structure and Fiber-Optic Miniaturization
Source abstract
Abstract
In this paper, we report a novel wavelength interrogation-based surface plasmon resonance (SPR) system, in which a film of three Ag layers and three Au layers are alternately deposited on a Kretschmann configuration as sensing element. This multilayer film shows higher sensitivity for refractive index (RI) measurement by comparing with single Au layer structure, which is consistent with its theoretical calculation. A sensitivity range of 2056–5893 nm/RIU can be achieved, which is comparable to RI sensitivities of other wavelength-modulated SPR sensors. Compared with Ag film, this Ag/Au multilayer arrangement offers anti-oxidant protection. This SPR biosensor based on a cost-effective Ag/Au multilayer structure is applicable to the real-time detection of specific interactions and dissociation of low protein concentrations. To extend the application of this highly-sensitive metal film device, we integrated this concept on an optical fiber. The range of RI sensitivities with Ag/Au multilayer was 1847–3309 nm/RIU. This miniaturized Ag/Au multilayer-based fiber optic sensor has a broad application in chemical and biological sensing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Fiber Optic Sensors · Plasmonic and Surface Plasmon Research · Photonic and Optical Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Homola J (2003) Present and future of surface plasmon resonance biosensors. Anal Bioanal Chem 377:528–53910.1007/s00216-003-2101-0 ↗
2. Boozer C, Yu Q, Chen S, Lee CY, Homola J, Yee SS, Jiang S (2003) Surface functionalization for self-referencing surface plasmon resonance (SPR) biosensors by multi-step self-assembly. Sensors Actuators B Chem 90:22–3010.1016/S0925-4005(03)00017-0 ↗
3. Lu HB, Homola J, Campbell CT, Nenninger GG, Yee SS, Ratner BD (2001) Protein contact printing for a surface plasmon resonance biosensor with on-chip referencing. Sensors Actuators B Chem 74:91–9910.1016/S0925-4005(00)00716-4 ↗
4. Green RJ, Frazier RA, Shakeshe KM, Davies MC, Roberts CJ, Tendler SJB (2000) Surface plasmon resonance analysis of dynamic biological interactions with biomaterials. Biomaterials 21:1823–183510.1016/S0142-9612(00)00077-6 ↗
5. Shao Y, Li Y, Gu D, Zhang K, Qu J, He J, Li X, Wu SY, Ho HP, Somekh MG (2013) Wavelength-multiplexing phase-sensitive surface plasmon imaging sensor. Opt Lett 38:1370–137210.1364/OL.38.001370 ↗
6. Chena Y, Dong B, Zhou W (2010) Surface plasmon resonance biosensor modified with multilayer silver nanoparticles films. Appl Surf Sci 257:021–1026
7. Jha R, Sharma AK (2009) High-performance sensor based on surface plasmon resonance with chalcogenide prism and aluminum for detection in infrared. Opt Lett 34:749–75110.1364/OL.34.000749 ↗
8. Lin K, Wei L, Zhang D, Zheng R, Wang P, Lu Y, Ming H (2007) Temperature effects on prism-based surface plasmon resonance sensor. Chin Phys Lett 24:3081–308410.1088/0256-307X/24/11/018 ↗
9. Shibayama J, Takeuchi T, Goto N, Yamauchi J, Nakano H (2007) Numerical investigation of a Kretschmann-type surface plasmon resonance waveguide sensor. J Lightwave Technol 25:2605–261110.1109/JLT.2007.903823 ↗
10. Pollet J, Delport F, Janssen K, Jans K, Maes G, Pfeiffer H, Wevers M, Lammertyn J (2009) Fiber optic SPR biosensing of DNA hybridization and DNA–protein interactions. Biosens Bioelectron 25:864–86910.1016/j.bios.2009.08.045 ↗
11. Anuj KS, Gupta BD (2004) Absorption-based fiber optic surface plasmon resonance sensor: a theoretical evaluation. Sensors Actuators B Chem 100:423–43110.1016/j.snb.2004.02.013 ↗
12. Peng W, Banerji S, Kim Y, Booksh KS (2005) Investigation of dual-channel fiber-optic surface plasmon resonance sensing for biological applications. Opt Lett 30:2988–299010.1364/OL.30.002988 ↗
13. Caucheteur C, Shevchenko Y, Shao LY, Wuilpart M, Albert J (2011) High resolution interrogation of tilted fiber grating SPR sensors from polarization properties measurement. Opt Express 19(2):1656–166410.1364/OE.19.001656 ↗
14. Masson JF, Obando L, Beaudoin S, Booksh KS (2004) Sensitive and real-time fiber-optic based surface plasmon resonance sensors for myoglobin and cardiac troponin I. Talanta 62:865–87010.1016/j.talanta.2003.09.032 ↗
15. Sharma K, Jha R, Gupta BD (2007) Fiber-optic sensors based on surface plasmon resonance: a comprehensive review. IEEE J Sens 7:1118–112910.1109/JSEN.2007.897946 ↗
16. Kim YC, Peng W, Banerji S, Booksh KS (2005) Tapered fiber optic surface plasmon resonance sensor for analyses of vapor and liquid phases. Opt Lett 30:2218–222010.1364/OL.30.002218 ↗
17. Iga M, Seki A, Watanabe K (2004) Hetero-core structured fiber optic surface plasmon resonance sensor with silver film. Sensors Actuators B Chem 101:368–37210.1016/j.snb.2004.04.007 ↗
18. Wang Y, Meng S, Liang Y, Li L, Peng W (2013) Fiber-optic surface plasmon resonance sensor with multi-alternating metal layers for biological measurement. Photonic Sens 3:202–20710.1007/s13320-013-0119-2 ↗
19. Chen R, Wang M, Wang S, Liang H, Hu X, Sun X, Zhu J, Ma L, Jiang M, Hu J, et al. (2015) A low cost surface plasmon resonance biosensor using a laser line generator. Opt Commun 349:83–8810.1016/j.optcom.2015.03.035 ↗
20. Sharma AK, Gupta BD (2006) Fibre-optic sensor based on surface plasmon resonance with Ag-Au alloy nanoparticle films. Nanotechnology 17:124–13110.1088/0957-4484/17/1/020 ↗
21. Murray-Méthot MP, Ratel M, Masson JF (2010) Optical properties of Au, Ag and bimetallic Au on Ag nanohole arrays. J Phys Chem C 114(18):8268–827510.1021/jp101231c ↗
22. Zynio SA, Samoylov AV, Surovtseva ER, Mirsky VM, Shirshov YM (2002) Bimetallic layer increase sensitivity of affinity sensors based on surface plasmon resonance. Sensors 2:62–7010.3390/s20200062 ↗
23. R. Tabassum, and B. D. gupta (2015) Performance analysis of bimetallic layer with zinc oxide for SPR-based fiber optic sensor, J Lightwave Technol 33: 4565–457110.1109/JLT.2015.2479631 ↗
24. B. Lee, S. Roh, and H. Kim (2009) Plasmon-sensor design can enhance sensing capability, SPIE Newsroom. doi: 10.1117/2.1200908.175110.1117/2.1200908.1751 ↗
25. Kim I, Kihm KD (2015) Nano sensing and energy conversion using surface Plasmon resonance (SPR). Materials 8:4332–434310.3390/ma8074332 ↗
26. Luk TS, Iltai K, Salvatore C, Howell SW, Subramania GS (2013) Near-infrared surface plasmon polariton dispersion control with hyperbolic metamaterials. Opt Express 21:11107–1111410.1364/OE.21.011107 ↗
27. Mohanty G, Sahoo BK, Akhtar J (2015) Sensitivity parameter analysis of grapheme based bimetallic surface plasmon resonance biosensor. J Nano Res 34:17–2110.4028/www.scientific.net/JNanoR.34.17 ↗
28. Shinohara S, Tanaka D, Okamoto K, Tamada K (2015) Colorimetric plasmon sensors with multilayered metallic nanoparticle sheets. Phys Chem Chem Phys 17:18606–1861210.1039/C5CP02564H ↗
29. Qazwini YA, Noor ASM, Yadav TK, Yaacob MH, Harun SW, Mahdi MA (2004) Performance evaluation of a bilayer SPR-based fiber optic RI sensor with TiO2 using FDTD solutions. Photonic Sens 4:289–29410.1007/s13320-014-0207-y ↗
30. Gupta BD, Sharma AK (2005) Sensitivity evaluation of a multi-layered surface plasmon resonance-based fiber optic sensor: a theoretical study. Sensors Actuators B Chem 107:40–4610.1016/j.snb.2004.08.030 ↗
31. Peng W, Liang Y, Li L, Masson JF (2014) Metallic nanowire array-polymer hybrid film for surface plasmon resonance sensitivity enhancement and spectral range enlargement. Plasmonics 9:319–32610.1007/s11468-013-9627-6 ↗
32. Zhu Z, Feng M, Zuo L, Zhu Z, Wang F, Chen L, Li J, Shan G, Luo S (2015) An aptamer based surface plasmon resonance biosensor for the detection of ochratoxin A in wine and peanut oil. Biosens Bioelectron 65:320–32610.1016/j.bios.2014.10.059 ↗
33. Patskovsky S, Kabashin AV, Meunier M, Luong JHT (2004) Near-infrared surface plasmon resonance sensing on a silicon platform. Sensors Actuators B Chem 97:409–41410.1016/j.snb.2003.09.023 ↗
34. Liu B, Jiang Y, Zhu X, Tang X, Shi Y (2001) Hollow fiber surface plasmon resonance sensor for the detection of liquid with high refractive index. Opt Express 21:32349–3235710.1364/OE.21.032349 ↗
35. Wang YJ, Meng SW, Liang YZ, Li LX, Peng W (2013) Fiber-optic surface plasmon resonance sensor with multi-alternating metal layers for biological measurement. Photonic Sens 3:202–20710.1007/s13320-013-0119-2 ↗
36. Piliarik M, Homola J (2009) Surface plasmon resonance (SPR) sensors: approaching their limits. Opt Express 17:16505–1651710.1364/OE.17.016505 ↗
37. Lin HY, Huang CH, Cheng GL, Chen NK, Chui HC (2012) Tapered optical fiber sensor based on localized surface plasmon resonance. Opt Express 20:21693–2170110.1364/OE.20.021693 ↗