journal article·2024-12Open access

The effect of semi-curing on neat resin mode I fracture properties

Michael O’Leary, Robin Hartley, Turlough McMahon, James Kratz

Abstract

The sensitivity of fracture toughness to the cure path of a high-performance hot infusion epoxy resin (EP2410) is assessed in this study through single-edge notch bend testing of neat resin specimens. The specimens were prepared using a two-stage semi-curing process. In the initial stage, the partial degree of cure and the semi-cure temperature were varied. In the second stage, samples were heated to 180 °C for a secondary post-cure. These samples were compared to two baseline samples produced using the manufacturer's recommended cure cycle of 180 °C, and a modified isothermal cure at a lower cure temperature of 140 °C. The results show that the semi-curing path has no statistically significant influence on the mode I fracture toughness of the material studied here. Sample similarity was confirmed through SEM examination of the fracture surface, which showed minimal variation in surface topography. These findings open new possibilities to use this type of material for novel manufacturing processes involving semi-curing steps.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Mechanical Behavior of Composites · Photopolymerization techniques and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

, University of Bristol, Queen’s Building

Airbus Operations Ltd

Funding

EPSRC Centre for Doctoral Training in Advanced Composites for Innovation and Science · EPSRC Future Composites Manufacturing Hub · Airbus UK

References (39)

Show source-provided references
1. 10.3390/polym1101012710.3390/polym11010127 ↗
2. 10.3390/jcs610030610.3390/jcs6100306 ↗
3. 10.1080/0021846940802709410.1080/00218469408027094 ↗
4. Composite materials handbook, volume 3: polymer matrix composites materials usage, design and analysis. Wichita: SAE International, 2012.
5. 10.1002/(SICI)1439-2054(20000101)274:1<25::AID-MAME25>3.0.CO;2-L10.1002/(SICI)1439-2054(20000101)274:1<25::AID-MAME25>3.0.CO;2-L ↗
6. 10.1016/j.compscitech.2004.07.01510.1016/j.compscitech.2004.07.015 ↗
7. 10.1177/002199830203600130010.1177/0021998302036001300 ↗
8. 10.1088/1757-899X/388/1/01201210.1088/1757-899X/388/1/012012 ↗
9. 10.1177/002199831664875810.1177/0021998316648758 ↗
10. Gower MRL, Shaw RM, Broughton WR. Effect of cure cycle on the properties of thick carbon/epoxy laminates. In: ICCM17 proceedings, 2009.
11. 10.1016/1359-835X(95)00023-U10.1016/1359-835X(95)00023-U ↗
12. 10.1002/pc.1053110.1002/pc.10531 ↗
13. 10.1016/j.polymer.2018.11.00810.1016/j.polymer.2018.11.008 ↗
14. 10.1007/BF0054070210.1007/BF00540702 ↗
15. 10.1007/s10853-020-05675-310.1007/s10853-020-05675-3 ↗
16. 10.1016/0032-3861(89)90151-110.1016/0032-3861(89)90151-1 ↗
17. 10.1002/app.1993.07050061510.1002/app.1993.070500615 ↗
18. 10.3390/ma1110196010.3390/ma11101960 ↗
19. 10.1016/S0032-3861(99)00238-410.1016/S0032-3861(99)00238-4 ↗
20. 10.1016/j.compscitech.2020.10824110.1016/j.compscitech.2020.108241 ↗
21. 10.1021/jacsau.2c0012010.1021/jacsau.2c00120 ↗
22. OdagiriI N, Shirasu K, Kawagoe Y, et al. Cure path dependency in crosslinked structure of DGEBA/DICY/DCMU thermosetting resin. Mater Syst 2021; 38: 21–30.
23. 10.3390/polym1002012510.3390/polym10020125 ↗
24. 10.1002/pen.2374910.1002/pen.23749 ↗
25. 10.1016/j.compositesa.2007.04.00710.1016/j.compositesa.2007.04.007 ↗
26. 10.1002/app.4215910.1002/app.42159 ↗
27. Butler G. Methods for making composite parts from stacked partially cured sublaminate units. US 2019 / 0168481 A1.
28. Munoz Lopez P Zuazo Ruiz M Fantina Llorente B et al. Manufacturing method of partially cured composite components. EP 2 883 687 A1 2015.
29. Nogueroles Vines P Garcia Garcia A Cerezo Pancorbo C. Method for manufacturing elements of composite materials by the cobonding technique. EP 1 231 046 A3.
30. Campbell F. Introduction to composite materials and processes: unique materials that require unique processes. In: Manufacturing processes for advanced composites. Oxford, UK: Elsevier Advanced Technology, 2003, pp.2–27.
31. 10.1016/j.polymertesting.2022.10747310.1016/j.polymertesting.2022.107473 ↗
32. D20 Committee. Test methods for plane-strain fracture toughness and strain energy release rate of plastic materials. ASTM International. DOI: https://doi.org/10.1520/D5045-14.10.1520/D5045-14 ↗
33. Hartley R. The effect of interleaf architecture on composite toughness. Bristol, UK: University of Bristol, 2021.
34. Skordos A Kratz J. Layer by layer curing (LbL) feasibility study final report. 2018.
35. Hubert P, Johnston A, Poursartip A, et al. Cure kinetics and viscosity models for Hexcel 8552 epoxy resin. In: SAMPE 2001, Long Beach, 2001.
36. 10.1177/002199830935396010.1177/0021998309353960 ↗
37. 10.1021/am900030u10.1021/am900030u ↗
38. 10.1016/0010-4361(86)90746-910.1016/0010-4361(86)90746-9 ↗
39. 10.1007/BF0055493210.1007/BF00554932 ↗